Results 1 to 4 of 4
Discuss Succes: Z68X-UD3H-B3, i7-2600K-Intel HD 3000 - 10.7.2 (TUTORIAL) at the Tutorials - Hackint0sh.org; So, I got my Machine working now, and it's goddamn perfect! Everything works like a ...
  1. #1
    Newbie Array

    Join Date
    Feb 2012
    Posts
    3
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Thumbs up Succes: Z68X-UD3H-B3, i7-2600K-Intel HD 3000 - 10.7.2 (TUTORIAL)

    So, I got my Machine working now, and it's goddamn perfect! Everything works like a charm.
    Used hardware:
    (!This guide should help everyone with a HD 3000, but the Update helper is only needed for boards with Sandybridge!)

    Mainboard: Gigabyte Z68X-UD3H-B3
    CPU: Intel i7-2600K
    RAM: 8GB Kingston 1333MHz
    Graphics: Intel HD3000
    Harddisk: Seagate Barracuda 500GB
    FANS: 2x 12cm (F12)

    Alltogether: 476€ (about $650)

    Here's how I did it:

    0.Set Bios correct (check forum) + Upadte your BIOS (Dual-Bios of Gigabyte is pretty cool)
    1.Copy an 10.6 Retail DVD to any external harddrive (I justed a 10.6.5, but not important)
    2.Boot ext. Drive with iBoot
    3.Format disk with MacOS-Journaled with Diskutility
    3.Install Snow Leo withMinimum Settings.
    4.Install Update Helper (you may have to be registerd on tonymac to download this)
    5.REBOOT SYSTEM!
    6.Install the 10.6.8 Combo Update
    7.Reboot Machine
    8.Download 10.7 Lion from Appstore or whatever
    9.Let the Downloaded dmg "prepatch" your system
    10.Copy it with xMove to Second HDD Partition or USB-HDD
    11.Install Chimera 1.5.4 via Multibeast on the Device used in 11.
    12.Boot your drive from 11.
    13.Should see full Graphics now for first time(also ok if not)
    14.Install Lion on your 10.6.8 partition
    15.Boot Lion (if not working correctly, boot in safemode ( enter -x as boot parameter)
    16.Now the patching part
    -Open Multibeast 4.0.3
    -Install: UserDSDT(fond on tonymac)
    -All System Utilities
    -Kexts and Enablers:

    -Audio
    -ALL!

    -Disk
    -IOHACI BlockStorage Injector

    -Miscellaneous(Not sure waht i did :/ )
    -FakeSMC
    -NullCPUPowerManagement

    -Network
    -Realtek Gigabit ethernet 2.0.6 (If no new Network adapter is recognized,install
    the Kext(only the Kext) again and again until it works(really works after 2-3
    times )

    -Customization
    -System Definitions
    -Macbook Pro 8,1


    17.Reboot (NP if still not working, reboot in safemode)
    18.Install Mac 10.7.2 Update

    DONE.

    Now it should be working correctly

    Good luck guys, just ask if you have Questions
    Last edited by Nicolas2016; 02-20-2012 at 03:35 PM. Reason: links

  2. Thanks trasman thanked for this post.


  3. #2
    Newbie Array

    Join Date
    Oct 2011
    Posts
    1
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    Hi Nicholas,
    I'm having difficulties getting the 10.6.8 update to work.
    I have a similar setup as you:
    intel i72600k
    Ga-z68x-ud3h-b3
    integrated graphics
    4 gb memory (the other 4 are sitting on the desk right now)
    OCZ 120 gb SSD

    I have successfully installed 10.6.3 and i'm having difficulty moving beyond it.
    I'm guessing I have the bios right (you say check forum but I can't find anything)
    after running the combo update for 10.6.8, and reboot I get a grey screen.
    I can launch in safe mode but don't really know what to do next.

    suggestions?

  4. #3
    Newbie Array

    Join Date
    Feb 2012
    Posts
    3
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    Hi, er, Nick ?^^

    I'm not absolutely sure, but I think I started with a 10.6.5 retail DVD, but that shouldn't be relevant...
    Sorry, I forgot to give a link to update helper...
    Install this: Update helper (You may have to be registered on Tonymac), then REBOOT your pc and THEN install the 10.6.8 combo-Update (the order is important!)

    This should fix the problem


    About the BIOS:
    It's basically setting the SATA-controller to AHCI-Mode and setting HPET(Power options) to 64-Bit mode

    I think SATA should be alright so far, if it were not you wouldn't have been able to install the whole thing.
    HPET is important for standby function, so check this if there are problems...



    I hope I could help you, feel free to come back if there is further trouble, or just gimme a thanx

    Nicolas
    Last edited by Nicolas2016; 02-20-2012 at 03:27 PM.

  5. #4
    Newbie Array

    Join Date
    Jan 2012
    Posts
    2
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    My old computer just died on me, so I stared the search for good new parts.
    Found Z68X-UD3H-B3 and i7-2600K to be right about what I needed.
    Searched the web for any OSX reports on this motherboard and found yours and thanks to you and your thread I bought both the motherboard and CPU.
    Booted up my old OSX partition and to my surprise it started.
    I then installed the the latest version of Chimera (1.8.0) on top of my old Chameleon.
    Replaced all kext, dsdt.aml and SMBIOS.plist in /Extra/ with the once you wrote.
    And the result is a fully working MAC. Even dual monitor is working!!! I have not been able to get this working on my last computer setup.

    Thank you Nicolas2016

    By the way, is your motherboard/CPU making i high pitched sound?
    I turned off "C3/C6 State Support" in BIOS and it stopped the whining but maybe I should get a replacement.
    And yet another by the way, is your speaker making a bang (like the sound of the needle dropping on a LP record) right before every sound output?

 

 

Similar Threads

  1. Installing SnowLeopard on Dimension 3000, Intel Pentium 4
    By blackandyellow in forum Installation
    Replies: 1
    Last Post: 08-17-2012, 06:03 AM
  2. Intel HD 3000 non sandyBridge Hp dm4-1065dx
    By Macjon1 in forum General - Lion 10.7.x
    Replies: 0
    Last Post: 12-06-2011, 08:47 PM
  3. Replies: 1
    Last Post: 03-13-2011, 06:43 PM
  4. Replies: 10
    Last Post: 04-10-2009, 11:45 PM
  5. Will Pentium 4/AMD 3000+/Intel Atom 330 Work?
    By Fanwashere in forum Hardware
    Replies: 1
    Last Post: 02-12-2009, 08:45 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBulletin®
Copyright © 2014 vBulletin Solutions, Inc. All rights reserved.
Search Engine Friendly URLs by vBSEO
(c) 2006-2012 Hackint0sh.org
All times are GMT +2. The time now is 08:49 PM.
twitter, follow us!