Page 1 of 4 1234 LastLast
Results 1 to 10 of 32
Discuss Installing 10.5.8 on an Acer Aspire One D250 using iAtkos v7 at the Tutorials - Hackint0sh.org; *THIS IS COPY PASTA FROM THIS THREAD AT THE ASPIRE ONE FORUMS- Acer Aspire One ...
  1. #1
    Newbie Array

    Join Date
    Oct 2009
    Location
    Mojave Desert, California
    Posts
    4
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default Installing 10.5.8 on an Acer Aspire One D250 using iAtkos v7

    *THIS IS COPY PASTA FROM THIS THREAD AT THE ASPIRE ONE FORUMS- Acer Aspire One User Forum • View topic - 10.5.8 install on Acer Aspire One D250 using iAtkos v7 *

    I figured that I would post it here too, since it seems to help a lot of people

    **Begin copy pasta**

    This is an updated version of the tutorial here -> Acer Aspire One User Forum • View topic - 10.5.7 install on Acer Aspire One D250 using iAtkos v7
    This new version uses a different kernel, and seems to result in a more stable system. Since it's so different, I felt that I needed to create a new thread.

    Besides, I'm tired of editing the same damn post over 9000 times

    Installing Mac OS X On to an Acer Aspire One D250 rev. 3


    In this tutorial, I'm assuming you're using a USB DVD drive.
    However, the procedure isn't much different if you're installing from a flash drive/memory stick.

    Before installing, do the following-
    Get iAtkos v7 from the usual places and burn it (it's a single-layer DVD)
    Download the 10.5.8 Combo update from Apple - Downloads
    Download the newly revised D250-rev3.zip file I've prepared. It comes with
    -The latest Kismac
    -Atheros 5007EG drivers
    -System.kext, Seatbelt.kext and dsmos.kext files for use in 10.5.8
    -Voodoo Kernel 1.0 (based on XNU 9.5)
    -Kextloader B7
    -OSx86 Tools
    -New intel GMA950 drivers (to fix the -F flag bug)

    1.Once you've done the above, insert your iAtkos v7 disc in to your USB DVD drive and boot from it. It may take a few reboots to actually boot (this seems to be a BIOS glitch, unfortunately) and wait a bit for it to load.

    2.Go to Utilities -> Disk Utility and format your HDD. Mac OS X runs best when it's the only OS on your netbook (I will not be covering dual-booting in this tutorial). Be sure to use MBR (Master Boot Record) and NOT GUID.

    3.Mark the following under "Customize"-

    Main System -> Bootloader -> Chameleon 2
    X86 patches -> Decrypters -> dsmos (uncheck 'AppleDecrypt')
    Kernel -> 9.5.0 voodoo
    ACPI -> x86 ACPI
    GFX -> Intel GMA 950
    Sound-> Voodoo HDA
    System -> Apple PS2 controller (voodoo PS2 w/ trackpad is optional, but has a tendency to stop working and cause kernel panics)
    System -> Laptop battery (NTFS-3G and ExtFS work as well if you want them)
    you may also install an alternative language to English

    Also, be sure to uncheck "Disabler".
    Make sure ONLY the above is selected. NOTHING. ELSE.

    4.Grab some coffee and wait for it to install (~20 minutes)

    5.After it's done installing, click 'reboot'. When you get to the bootloader screen, press a key and use the following flags-
    Code:
    -f -v cpus=1
    6.Go through the video, cheesy music (if the sound is cutting out, don't worry about it), username, etc.

    7.Unzip the D250-rev2.zip on to your desktop. A folder called 'D250' will be created. Open it.

    8.Go to the Apps folder and copy all of the apps to /Applications

    9.Open Kextloader B7 and drag&drop D250/kexts/Seatbelt.kext and System.kext in to it. Type in your password. Install. DO NOT REBOOT.

    10.Go to D250/kernel, open the .dmg and install the Voodoo Kernel. NOW reboot.

    11.You don't have to put any flags in. Once you get back to the desktop, back everything up by opening a terminal and typing these commands-
    Code:
    sudo cp -rf /System/Library/Extensions /System/Library/Extensions.backup
    sudo cp -rf /mach_kernel.voodoo /mach_kernel.backup
    [optional]
    Code:
    sudo rm -rf /mach_kernel.original (deletes original kernel)
    These commands back everything up, just in case your 10.5.8 install goes bad.

    12.Now install the 10.5.8 COMBO update that you downloaded earlier. It'll take a while.

    13.If you got a kernel panic in the middle of the install, scroll down to "GOD DAMMIT I GOT A KERNEL PANIC WHILE I INSTALLED 10.5.8!!11". If it's asking you to reboot DONT DO IT YET.

    14.Open kextloaderB7 and install D250/kexts/dsmos.kext. DO NOT REBOOT.

    15.Open up OSx86 tool and select "Repair permissions", "Set Extensions permissions" and "Clear Extensions Cache". wait for it to finish

    16.NOW reboot. It will reboot once or twice on it's own- don't fret! Once it's done, you should be back to your desktop with an ugly 800x600 resolution or a blue screen.

    17.[if you have the D250-rev2.zip file] Insert your iAtkos v7 disc again, and boot from it. Under 'customize' select NOTHING EXCEPT system -> drivers -> intel -> GMA950. Click install. Reboot.

    [if you have the D250-rev3.zip file] go to D250/graphics and open the .pkg file. Reboot. *note- this also fixes the -F flag bug

    18.You should have a nice 1024x600 resolution again. Open up D250/wifi/AR5007EG.pkg file. Reboot.

    19.Open Kismac, go to preferences and add "Airport Extreme passive". Now scan- you should see some networks.

    And that's about it. You now have a D250 with 10.5.8. STAY AWAY FROM AIRPORT UPDATES. All other updates are fine to install.

    Glitches/Bugs/Things that don't work-
    The -F flag causes a blue screen. *Fix- download the new D250-rev3.zip file, unzip it, go to D250/graphics and open the .pkg file. Reboot.

    Hibernate/Sleep results in a silent kernel panic. Be sure to disable it!

    Rebooting can result in this-

    None of those airports work BTW. The only solution is to wipe and start from scratch.

    From Acer Aspire One User Forum • View topic - AOD250 10.5.8 iDeneb 1.6 install
    I purchased a DW1510 from eBay for under $20, replacing it took about 15 minutes. I've read horror stories about taking the AOD apart, it's actually super easy, easier than other notebooks I worked on before. You can find the service manual on this forum, it has great step by step illustrated information.

    Do not buy a DW1390, it will not fit in the D250. You need a half minicard. The DW1510 also supports 802.11n, which is a nice speed upgrade anyway. The DW1510 works "out of the box"
    ^ I can confirm that the above is true- I bought a Dell DW1390 1/2 size card off of ebay for about $12. It shows up as a Broadcom 4312 and is fully compatible with Mac OS X 10.5.x and 10.6.x out of the box


    Webcam, Mic, Ethernet all don't work for the time being. I'll update as drivers are made for them.

    And finally, a screenshot


    GOD DAMMIT I GOT A KERNEL PANIC WHILE I INSTALLED 10.5.8!!11

    1.Boot in to single user mode (-s)
    2.rm -rf /System/Library/Extensions
    3.rm -rf /System/Library/Extensions.mkext
    4.cp -rf /System/Library/Extensions.backup /System/Library/Extensions
    5.reboot with -f flag. You're back in 10.5.7!

    I'M STUCK AT "don't_steal_mac_os_x.kext" D:

    You forgot to install the dsmos.kext file that I provided

    1.Copy the dsmos.kext file to a flash drive or other external media
    2.Boot in to safe mode
    3.rm -rf /System/Library/Extensions/dsmos.kext
    4.mkdir /volumes/blah (change as needed)
    5.mount /dev/disk1s1 /volumes/blah (change as needed)
    6.cp -rf /volumes/blah/dsmos /System/Library/Extensions
    7.chown root:wheel /System/Library/Extensions/dsmos.kext
    8.reboot with -v

    -Edits-
    10/19/2009- updated D250 zip file to include -F flag-proof GMA950 drivers and updated tutorial appropriately (thanks sam.hackint0sh for providing the drivers!)
    10/26/2009- Fixed a typo that led to a 404 when you try to download the zip file. Thanks phandrew for pointing it out!



  2. #2
    Newbie Array

    Join Date
    Oct 2009
    Posts
    1
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default problem during install

    Hi, i have a problem at step 6.Go through the video, cheesy music (if the sound is cutting out, don't worry about it), username, etc.
    The video and music starts, i choose region, keyboard layout ...everything ok, after i choose "do not transfer...from another Mac" i hit continue and...nothing...the music continue for about one minute and then goes back to the movie from the begining...
    Anybody knows why ?

  3. #3
    dre
    dre is offline
    Newbie Array

    Join Date
    Nov 2009
    Posts
    1
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default Same thing

    New Aspire One, all goes smooth until the music starts. Choose no transfer, and it just repeats. Any ideas ?

  4. #4
    Newbie Array

    Join Date
    Nov 2009
    Posts
    1
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default NO SOUND using Voodoo HDA

    I need help, I installed the iAtkos v.7 using this guide, but at the finish my netbook no have audio.

    Why??

    I need extra .kext for enable the audio??

  5. #5
    Newbie Array

    Join Date
    Dec 2009
    Posts
    2
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default Installing 10.6 on Acer Aspire One D250?

    Does anyone know how to install 10.6 on the D250? I tried making a USB thumb drive, but I get an Unsupported CPU family error during install.



  6. #6
    Newbie Array

    Join Date
    Dec 2009
    Posts
    3
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    Quote Originally Posted by codmedia View Post
    Hi, i have a problem at step 6.Go through the video, cheesy music (if the sound is cutting out, don't worry about it), username, etc.
    The video and music starts, i choose region, keyboard layout ...everything ok, after i choose "do not transfer...from another Mac" i hit continue and...nothing...the music continue for about one minute and then goes back to the movie from the begining...
    Anybody knows why ?
    Has anyone discovered a solution for this? I'm getting the same thing.

  7. #7
    Newbie Array

    Join Date
    Dec 2009
    Posts
    3
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    I figured it out. Leave post-install actions checked. It's a mistake in the instructions.

  8. #8
    Newbie Array

    Join Date
    Dec 2009
    Posts
    1
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    Im really stuck here.

    New to this stuff, ive installed it all but it wont boot without the dvd in the drive and the bootloader isnt working and i cant get onto my windows partition.

    I also have 0 wireless...

    Any help appreciated

  9. #9
    Newbie Array

    Join Date
    Dec 2009
    Posts
    1
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    I have a few questions…

    it says the netbook can’t sleep. what happens when you close the netbook? does it stay awake?

    also what other cheaper WIFI cards work? can you use an external USB wifi card? so you don’t void the warranty?

    any other problems with running OSX on the D250?

    If I want to reinstall windows on the D250 how do I do this? it has no install disk?

  10. #10
    Newbie Array

    Join Date
    Jan 2010
    Posts
    1
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    Quote Originally Posted by thequestionman View Post
    I have a few questions…

    it says the netbook can’t sleep. what happens when you close the netbook? does it stay awake?

    also what other cheaper WIFI cards work? can you use an external USB wifi card? so you don’t void the warranty?

    any other problems with running OSX on the D250?

    If I want to reinstall windows on the D250 how do I do this? it has no install disk?
    Thanks you for the post.
    Hi guys, Im a newbie. Nice to join this forum.
    __________________
    Movies Online Free


 

 
Page 1 of 4 1234 LastLast

LinkBacks (?)


Similar Threads

  1. Acer Aspire One D250
    By sidp96 in forum Installation
    Replies: 1
    Last Post: 07-24-2011, 06:44 AM
  2. Replies: 0
    Last Post: 12-02-2009, 06:18 PM
  3. Acer Aspire One D250
    By hugo70 in forum Distributions
    Replies: 0
    Last Post: 09-05-2009, 04:01 PM
  4. Problem Installing iATKOS on Acer Aspire 9410Z
    By aCasualObserver in forum Installation
    Replies: 1
    Last Post: 05-09-2009, 07:15 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBulletin®
Copyright © 2014 vBulletin Solutions, Inc. All rights reserved.
Search Engine Friendly URLs by vBSEO
(c) 2006-2012 Hackint0sh.org
All times are GMT +2. The time now is 06:34 PM.
twitter, follow us!