Discuss [TURBOSIM] - Q/A - Continue here the Bladox Turbo Sim Thread at the Turbo-, Supersim and Simcloning Solution - Hackint0sh.org; TURBO SIM IS WORKING. MANY CONFIRMATIONS RECEIVED!
Fully tested instructions will be posted soon.
Non ...
-
[TURBOSIM] - Q/A - Continue here the Bladox Turbo Sim Thread
TURBO SIM IS WORKING. MANY CONFIRMATIONS RECEIVED!
Fully tested instructions will be posted soon.
Non tested instructions (very close though) http://www.gurmelas.dyndns.org
To see the Thread history from Bladox check http://www.bladox.com/forum/viewtopic.php?t=542
DO NOT POST ON Bladox Forum no more.
A few answers for common questions:
1. This method works with V2 and V3 cards. CONFIRMED!
2. You will need to cut the card however is just the plastic you cutting.
3. A new software was released by Bladox (not tested yet) that allows you to enter the values manually so you won't need an AT&T or cut your AT&T if you don't want to.
4. Some people have reported that by using the method where you copy your iPhone AT&T SIM CCID and IMSI it doesnt require you to deactivate and activate. If deactivation and Activation is required is just a simple step - Software available here: http://iphone.fiveforty.net/wiki/index.php/IASign
5. The only tested way requires you to use a second phone to upload the application. For that your phone needs to be connected to you computer via Bluetooth (serial available) or via cable (with serial available). www.gurmelas.dyndns.org gives you an example with Razr.
6. You can buy the Turbo Sim at http://www.bladox.com/shop.php?lang=en -> Turbo SIM - Blank Version
7. Yes, it is expensive and Shipping is ridiculous expensive.
Last edited by frviana; 08-14-2007 at 05:03 PM.
-
-
Senior Professional
Array
I'm waiting for a Canadian to get through with testing so that I can go do this if it works.
-
-
I'm located in Canada on the Rogers network.
I got my Turbo sim today.
I have a Razor v1 and the latest Razor motokrzr k1. Both have usb modem abilty but both get this error when doing this command: turbo-info -d\\.\com6
initialzing modem
modem initiated
SEND: 01 029100110000810004FF0110
ANS AT+CMGW=9
>
ANS 029100110000810004FF0110
ERROR
Mobile Phone/Serial Cable Communication Error
Has anyone programmed the Turbo Sim using a cell phone? I know ozbimmer got his Turbo Sim working with iPhone but I think he used a real programmer that Bladox sells for like a $120.
Has anyone programmed a Turbo sim with a cell phone and if so what one?
-
Senior Professional
Array

Originally Posted by
viper99
I'm located in Canada on the Rogers network.
I got my Turbo sim today.
I have a Razor v1 and the latest Razor motokrzr k1. Both have usb modem abilty but both get this error when doing this command: turbo-info -d\\.\com6
initialzing modem
modem initiated
SEND: 01 029100110000810004FF0110
ANS AT+CMGW=9
>
ANS 029100110000810004FF0110
ERROR
Mobile Phone/Serial Cable Communication Error
Has anyone programmed the Turbo Sim using a cell phone? I know ozbimmer got his Turbo Sim working with iPhone but I think he used a real programmer that Bladox sells for like a $120.
Has anyone programmed a Turbo sim with a cell phone and if so what one?
read your pm email
-
-
I posted this earlier but with no response.. please help...
Can someone please tell me if an iPhone activated the official AT&T/iTunes way rather than using a hack, can be unlocked using the TSIM method without having to play around with iActivator/iPhuc/Jailbreak etc modifications, or will I have to totally reset the phone and jailbreak/activate it using the unofficial methods in order to use a TSIM+non-AT&T carrier?
I have a properly-activated iPhone with a cancelled AT&T airtime contract, so everything except the call functions ((WiFi, YouTUBE etc) work just fine. Do I have to screw with this to get a TurboSIM to work?
My TSIM arrives tomorrow so I'm anxious to get some advice on how to proceed. Any help would be much appreciated
-
Senior Professional
Array

Originally Posted by
teddie
read your pm email
I was just curious to the solution anyway incase I encounter it.
-
-
Ozbimmer,
Can you confirm what you used to program the Turbo Sim? Was it the Bladox programmer or a cell phone?
I think a lot of people are going to be getting there Turbo Sim in the mail soon and wont be able to program it if we can't get a list of cell phones that can talk/program to the Turbo Sim.
-

Originally Posted by
jalexuk
I posted this earlier but with no response.. please help...
Can someone please tell me if an iPhone activated the
official AT&T/iTunes way rather than using a hack, can be unlocked using the TSIM method without having to play around with iActivator/iPhuc/Jailbreak etc modifications, or
will I have to totally reset the phone and jailbreak/activate it using the unofficial methods in order to use a TSIM+non-AT&T carrier?
I have a properly-activated iPhone with a cancelled AT&T airtime contract, so everything except the call functions ((WiFi, YouTUBE etc) work just fine. Do I have to screw with this to get a TurboSIM to work?
My TSIM arrives tomorrow so I'm anxious to get some advice on how to proceed. Any help would be much appreciated

Yes, it will work. The important part to get it working is to have a non bricked radio, which you have, since you did a valid activation.
But if you didn't jailbreak/ssh & all your phone you'll have to load AppleSaft on the TurboSIM using another phone of course.
-
-

Originally Posted by
Zf_
Yes, it will work. The important part to get it working is to have a non bricked radio, which you have, since you did a valid activation.
But if you didn't jailbreak/ssh & all your phone you'll have to load AppleSaft on the TurboSIM using another phone of course.
Oh thanks for the reply
.. but if I haven't done jailbreak on my phone then although I may get the phone and calls working, presumably I won't be able to change network-specific things like the EDGE and SMS settings (or am I mistaken in assuming that)? In that case am I better off resetting my phone entirely and doing jailbreak/unofficial activation so I can edit all these settings or are they all carried in my local SIM anyway so that I won't have to do this?
-
viper> check my answer on the other thread

Originally Posted by
jalexuk
Oh thanks for the reply

.. but if I haven't done jailbreak on my phone then although I may get the phone and calls working, presumably I won't be able to change network-specific things like the EDGE and SMS settings (or am I mistaken in assuming that)? In that case am I better off resetting my phone entirely and doing jailbreak/unofficial activation so I can edit all these settings or are they all carried in my local SIM anyway so that I won't have to do this?
oh yes, completely forgot that sorry, you're definitely right - you'll have to jailbreak your phone to change the data settings, unless you're part of the VVVVVIP club of people that saw the network settings menu
. The SMS service center is read from the SIM though.
-
Similar Threads
-
By darthrez in forum Flea Market
Replies: 0
Last Post: 02-05-2008, 01:50 AM
-
By usvi4me in forum Turbo-, Supersim and Simcloning Solution
Replies: 2
Last Post: 01-03-2008, 03:04 PM
-
By jgarland79 in forum Flea Market
Replies: 3
Last Post: 08-29-2007, 02:24 AM
-
By skloke in forum Turbo-, Supersim and Simcloning Solution
Replies: 0
Last Post: 08-19-2007, 11:36 AM
-
By graeme0 in forum Turbo-, Supersim and Simcloning Solution
Replies: 7
Last Post: 08-14-2007, 11:07 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks