FIRST CHECK:

In XP the programmer led must be blue all the time. if not, the device drivers for win xp havent been installed corectly.
When started the vcp modus the led has to be red all the time, even without sim inserted. maybe you should turn on the log and can see what the problem might be. you have to choose a free com port, a com port not existing in your windows enviroment. check system, sometimes you have a couple of other virtuell coms, for bluetooth modem and something like that. use 9600 baud, this should work all the time (1x 3.579 Mhz) versions 2.65 and firmware 1.04 is up to date

if it still not work, enable log and send it here

Hi,

has someone an alternative download link for actual software ?
http://www.infinityusb.com is not available at the moment

Thanks, Newchurch

Hi guys,

I have Infinity USB Unklimited card reader and I'm unable to read the IMSI.
Here is the log:
OnDCD false
INFUNLTD_Phoenix_ChangeCustomBaud set to 9600, actual baud 9615, Stopbit 2, Parity 2, BoostFactor = 1.00
OnDCD true
OnDTR true
OnDCD true
RTS On
OnDCD false
OnHandflow ch=1 fr=40 xon=800 xoff=200
OnDCD false
OnOpenClose true
OnHandflow ch=1 fr=40 xon=800 xoff=200
OnDCD false
INFUNLTD_Phoenix_ChangeCustomBaud set to 0, actual baud 9615, Stopbit 2, Parity 2, BoostFactor = 1.00
OnDCD false
INFUNLTD_Phoenix_ChangeCustomBaud set to 0, actual baud 9615, Stopbit 0, Parity 2, BoostFactor = 1.00
OnDCD false
OnSpecialChars EofChar=0
ErrorChar=0n BreakChar=0n EventChar=0n XOnChar=11n XOffChar=13
OnDCD false
OnHandflow ch=1 fr=40 xon=800 xoff=200
OnDCD false
OnTimeouts
ReadIntervalTimeout - 1000
ReadTotalTimeoutMultiplier - 1000
ReadTotalTimeoutConstant - 1000
WriteTotalTimeoutMultiplier - 0
WriteTotalTimeoutConstant - 0
OnDCD true
RTS Off
Reset detected (phoenix), TRAP set
INFUNLTD_Phoenix_Read 5
INFUNLTD_Phoenix_Read 5
INFUNLTD_Phoenix_Read 1
Read1 FF
INFUNLTD_Phoenix_Read 5
INFUNLTD_Phoenix_Read 1
Read1 06
OnDCD false
INFUNLTD_Phoenix_ChangeCustomBaud set to 0, actual baud 9615, Stopbit 0, Parity 2, BoostFactor = 1.00
OnDCD false
INFUNLTD_Phoenix_ChangeCustomBaud set to 0, actual baud 9615, Stopbit 0, Parity 1, BoostFactor = 1.00
INFUNLTD_Phoenix_Read 1
Read1 97
OnDCD false
OnSpecialChars EofChar=0
ErrorChar=0n BreakChar=0n EventChar=0n XOnChar=11n XOffChar=13
OnDCD false
OnHandflow ch=1 fr=0 xon=800 xoff=200
OnDCD true
INFUNLTD_Phoenix_Write 5
No TRAP received after Reset
OnDCD true
INFUNLTD_Phoenix_Read 4
OnDCD true
OnDTR false
OnDCD false
OnOpenClose false


Can someone help me out?

Here is link for the software.
http://www.infinityusb.com/default.a...&DownloadID=24

Thank you

Regards

Phocus RS