Page 1 of 110 12345678910112151101 ... LastLast
Results 1 to 10 of 1092
Discuss [1.1.2 OTB] Tutorial MAC/PC with TurboSIM at the Turbo-, Supersim and Simcloning Solution - Hackint0sh.org; ...
  1. #1
    Respected Professional Array iMaso's Avatar

    Join Date
    Nov 2007
    Posts
    581
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    37

    Default [1.1.2 OTB] Tutorial MAC/PC with BLADOX TurboSIM

    NEWS FEBRUARY 8th, 2008:
    MOST LIKELY YOU WOULD AND SHOULD NOT USE THIS TUTORIAL ANYMORE - at least not if you had to order a TurboSIM first to do all this.
    SOFTWARE-UNLOCK for BOOTLOADER 4.6 (OTB 1.1.2 and OTB 1.1.3) HAS BEEN RELEASED; NO NEED FOR TURBOSIMS ANYMORE!

    ---------------------------------------------------------------------------------------------------------------------------------------------------------

    BIG FAT WARNING!

    THESE TUTORIALS ARE JUST AND ONLY MEANT FOR THE ORIGINAL BLADOX TURBOSIM, "BLANK VERSION"!

    NOT for any other xxxSIM-solution!

    IF YOU CAME HERE BY A LINK POSTED IN AN EBAY AUTION OR ON THE WEBSITE OF SOME SELLERS OF NEXTSIM OR SIMILAR: they might tell on their sites or in their auctions that the following tutorial is the valid one for the product they are selling (e.g. NEXTSIM), but it IS NOT!

    Any problems that might occur to you trying to use STEP 3 of this tutorial, especially "SIM Applications" not showing up on your phone in the end are probably a result of you NOT using an Original BLADOX TurboSIM but any other!

    iMaso, 14.1.08

    ---------------------------------------------------------------------------------------------------------------------------------------------------------

    ANOTHER WARNING!

    This tutorial is NOT for OTB 1.1.3 iPhones and NOT suitable for iPhones intentionally or acidentally upgraded to 1.1.3 via iTunes !

    ---------------------------------------------------------------------------------------------------------------------------------------------------------

    Hey guys!

    Here is my tutorial.

    How to get a 1.1.2 OTB iPhone fully functional using a BLADOX TurboSIM (this tutorial is made for iPhones purchased in the USA!).

    Some notes for newbies

    OTB means Out of The Box, so this is the state your phone is in when you unpack it after purchasing it as NEW. Right now, January 2008, all iPhones sold worldwide will probably have the firmware version 1.1.2 running, along with the Bootloader (BL) 4.06, which cannot be software unlocked at this time. This is why you will have to use a TurboSim or a similar product if you want to use your iPhone as an iPhone, and not just as an expensive iPod.

    I tried it with my own phone - and it worked - and there are many confirmations that this one worked for other users of this forum.

    Follow this tutorial step by step, slowly and carefully, then you should be OK. There are some issues which might occur, for which there are already solutions. Just read through the thread if necessary, post or PM me.

    If anyone finds mistakes in this tutorial, please PM me, I will correct and update it if necessary.

    NOTE:

    I clearly express, that I canīt and wonīt guarantee that this will work for you - each single one who tries this is the only one responsible for his iPhone, if you make mistakes during this - for whatever reason - donīt blame me!

    THANKS

    ---------------------------------------------------------------------------------------------------------------------------------------------------------

    A hint:
    --------------

    - IF your phone wonīt receive any calls but instead just displays a rotating cycle-icon and/or
    - IF you arenīt able to just dial a number (but only to choose a contact from the contactlist and dial THAT way) and/or
    - IF the phone just returns to the mainscreen when you go to Phone -> Keypad and then enter the first digit......

    -> here is the solution: you are in a not supported country.
    Supported countries (by November/07) are: US, Canada, UK, Germany, France, Italy, Japan and China

    You should run Tweaks 1.1.2 / iWorld from the AppTapp Installer, that should solve the problem.
    Last edited by iMaso; 02-08-2008 at 02:19 PM.



  2. #2
    Respected Professional Array iMaso's Avatar

    Join Date
    Nov 2007
    Posts
    581
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    37

    Default

    PLEASE READ THIS ONE BEFORE YOU START:
    http://www.hackint0sh.org/forum/show...54&postcount=1

    MAC-Version adopted and done by iMaso / valid for PPC and Intel

    HOW TO JAILBREAK/ACTIVATE A 1.1.2 OTB (USA, Bootloader 4.6) and USE IT WITH an Original BLADOX TurboSIM
    (this tutorial is NOT for NextSIM!!!!)

    -------------------------------------------------------------------------------------------------------------------------

    STEP 1 - DOWNGRADE YOUR 1.1.2 OTB to 1.1.1


    1. download 1.1.1 firmware here:

    http://appldnld.apple.com.edgesuite....a_Restore.ipsw


    2.

    iTunes 7.4.2 / 7.5 users: Connect your iPhone to your MAC and do the following: press both, sleep and home button for 10 seconds, around the 8th second the screen will turn black, still hold the two buttons and the iPhone will turn back on. When it turns on, release the sleep button but still hold the home button until you see the screen with the cable. You are now in restore-mode. DO NOT unplug the iPhone, proceed to step 1/3

    iTunes 7.6 users: disconnect iPhone from computer (remove usb cable), turn off iPhone completely (wait until iPhone screen turns black), start iTunes 7.6, push and hold the home button on iPhone, while holding the home button connect the usb cable to iPhone, (iPhone will start up showing Apple logo), continue holding the home button - after a while you'll see the Connect To iTunes image on the iPhone, then release the home button, iTunes will pop up a window in which it tells it has to check some update server and so on, click on Check and wait a little, iTunes will then report it found an iPhone in recovery mode, press OK, proceed to step 1/3


    3. to restore to 1.1.1 press the restore button WHILE holding the ALT-key; in the upcoming filechooser just choose the 1.1.1-firmware-file (iPhone1,1_1.1.1_3A109a_Restore.ipsw) you just downloaded; iTunes will now downgrade the iPhone to 1.1.1 (which may take a while) and then report the errorcode 1015 or 1011, which is not important and can be dismissed.


    4. shut down iTunes

    -------------------------------------------------------------------------------------------------------------------------

    STEP 2 - JAILBREAK and ACTIVATION / INSTALL OKTOPREP / UPGRADE back to 1.1.2


    1.

    iTunes 7.4.2 users, download this, mount it and move iNdependence.app to your desktop, then go to STEP 2/2

    http://independence.googlecode.com/f...nce_v1.2.5.dmg

    iTunes 7.5 users, download this, mount it and move iNdependence.app to your desktop, then go to STEP 2/2

    http://independence.googlecode.com/f...nce_v1.3.1.dmg

    iTunes 7.6 users, download this, mount it and move iNdependence.app to your desktop, then go to STEP 2/2

    http://independence.googlecode.com/f...1.3.2_beta.dmg



    2. start iNdependence and just wait until the iPhone will start normally / showing the activation screen (meaning iNdependence will have helped with bringing the iPhone out of the recovery mode)


    3. Assuming that you got the "activate" screen slide to unlock to the emergency keypad, dial *#307#, the phone will ring, then press backspace to clear the numbers, then press 1, then dial, the phone will ring again, press answer, then press hold, the phone will ring again, press dismiss, then go to contacts, add 2 contacts, one is: name p and url prefs://1F and the other is name j and url http://jailbreakme.com, save them and go to contact p and click on prefs://1F, this will take to set up your Wi-Fi, make sure you are connected to Wi-Fi and press home button, this will take you to the "activate" screen, slide to unlock, then dial 1, the phone will ring, answer and then press hold, it will ring again, then press dismiss, that will take you to contacts again.


    4. close iNdependence, then start iTunes, so that it can "see" your iPhone, but donīt let iTunes do anything with the phone, this will help performing the jailbreak now to follow in step 2/5


    5. now select contact j and click on url http://jailbreakme.com. this will open the browser to AppSnapp Webapp site, just choose "Install AppSnapp" at the bottom of the site, safari wil crash and then you will have to wait about 2 minutes, the phone will restart and you should have a jailbroken 1.1.1. Close iTunes.


    6. on your iPhone click Installer and check if you are prompted to update the installer / if an update is available, if yes, just do so (after it is done click the home button and wait for the iPhone to do a soft reset then slide to unlock.), if no, proceed to next step.


    7. on your iPhone click Installer / Tweaks 1.1.1 / Oktoprep and install that one. Wait for Installer to say it is ok blah blah blah, then press home button and wait for a soft reset. (do not restart phone)


    8. download 1.1.2 firmware here:
    http://appldnld.apple.com.edgesuite....b_Restore.ipsw


    9. start iTunes again, it should prompt if you wish to update to the latest firmware version (!!! which is 1.1.3 as of January 15th !!!!!!) - DO NOT DO THAT !!!! but press the ALT-key AND while holding the ALT-key click on UPDATE. In the upcoming filechooser you should choose the just downloaded 1.1.2-firmware-file ("iPhone1,1_1.1.2_3B48b_Restore"); iTunes will now update your iPhone back to 1.1.2


    10. shut down iTunes


    11. download and unpack this:

    http://conceitedsoftware.com/iphone/1.1.2-jailbreak.zip


    12. open "jailbreak.jar" and wait til the process is finished, iPhone will reboot twice during this. do NOT install SSH from jailbreak.jar!


    STEP 2 - DONE! Your iPhone is now jailbroken and activated running 1.1.2

    -------------------------------------------------------------------------------------------------------------------------

    STEP 3 - PREPARING and INSTALLING THE TURBOSIM


    1. on your iPhone, go to Settings -> General -> Auto Lock -> Never


    2. connect your iPhone to your WLAN (write down the IP your iPhone will have in your WLAN!) IMPORTANT: Only proceed further on in a WLAN-environment that will insure that the phone will retrieve the SAME IP via DHCP AGAIN AFTER THE NEXT REBOOT! Otherwise you will get stuck at STEP 3/14, cause the IP might have changed, e.g. in huge WLANs. If you are unsure then do this: on your iphone, after it acquires its IP address through DHCP, change the mode from DHCP to Static before you go on with the tutorial.


    3. on your iPhone, start the Installer and install the following: BSD Subsystem / CommunitySources / openSSH


    4. download and unpack this file:

    http://rapid_share.com/files/7197445..._rev2.zip.html

    (maybe in the domainname there is a _ which needs to be removed....)


    5. download and open Cyberduck (if you donīt have it already) here:

    http://tc.versiontracker.com/product...1.dmgCyberduck


    6. with Cyberduck connect to your iPhone; Protocol: SFTP / Port: 22 / Server: your iPhonesī IP (see above) / Username: root / Password: alpine


    7. use Cyberduck to copy the file "applesaft.trb" (from the folder turbosim_rev2) to the iPhone-folder /private/var/root


    8. use Cyberduck to copy all OTHER files (except "applesaft.trb") (from the folder turbosim_rev2) to the iPhone-folder /bin


    9. mark the copied files in the folder /bin, right-click Info and give them 0755-rights (owner: RWX, group: RX, others: RX)


    10. shut down Cyberduck


    11. cut out both SIMs, the original one supplied with the phone and your own, so they will fit perfectly into the TurboSim - do it carefully!


    12. put the original SIM supplied with the iPhone (not your own!) onto the TurboSim and carefully insert it into your iPhone


    13. start the Terminal and type: "ssh root@xxx.xxx.xxx.xxx" - (with xxx.xxx.xx.xx being your iPhonesī IP) - and hit Enter; if Terminal asks if you really want to connect, just type "yes" and hit Enter


    14. Terminal should ask for the root-password, which is "alpine" - so type "alpine" and hit Enter


    15. type "launchctl unload /System/Library/LaunchDaemons/com.apple.CommCenter.plist"


    16. type "turbo-info" and hit Enter - some numbers should appear (also maybe some "error" blah blah), but in the end finally followed by an "OK. no errors"


    17. type "turbo-app /private/var/root/applesaft.trb" ; after that an "OK" should appear!
    IF instead "BAD FILE" will be reported please try again but this time type "turbo-app -b57600 -v /private/var/root/applesaft.trb"
    IF that still wont work, meaning you get no "OK" in the end, please PM me! I am searching for a solution for this problem right now!

    18. type "launchctl load /System/Library/LaunchDaemons/com.apple.CommCenter.plist"


    19. restart your iPhone (BUT only if that last commandline got NO bad response!)


    20. on your iPhone go to Settings -> Phone -> SIM Applications -> Apple Saft -> Set -> Accept


    21. remove TurboSim and original SIM from the iPhone (carefully!)


    22. replace the original SIM with your own and put TurboSIM and your own SIM back into the iPhone (carefully!)


    23. restart your iPhone


    STEP 3 - DONE! Your iPhone should now be fully operational.

    -------------------------------------------------------------------------------------------------------------------------

    with regards and thanks to duyvan82 and all who contributed
    iMaso
    Last edited by iMaso; 01-23-2008 at 10:00 PM.

  3. #3
    Respected Professional Array iMaso's Avatar

    Join Date
    Nov 2007
    Posts
    581
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    37

    Default

    PLEASE READ THIS ONE BEFORE YOU START:
    http://www.hackint0sh.org/forum/show...54&postcount=1

    Windows-Version adopted and done by nikimere - with some little update by iMaso

    HOW TO JAILBREAK/ACTIVATE A 1.1.2 OTB (USA, Bootloader 4.6) and USE IT WITH an Original BLADOX TurboSIM
    (this tutorial is NOT for NextSIM!!!)

    -------------------------------------------------------------------------------------------------------------------------

    STEP 1 - DOWNGRADE YOUR 1.1.2 OTB to 1.1.1


    1. download 1.1.1 firmware here:

    http://appldnld.apple.com.edgesuite....a_Restore.ipsw


    2. Connect your iPhone to your PC and do the following: press both, sleep and home button for 10 seconds, around the 8th second the screen will turn black, still hold the two buttons and the iPhone will turn back on. When it turns on, release the sleep button but still hold the home button until you see a screen with the cable. You are now in restore-mode. DO NOT unplug the iPhone


    3. start iTunes 7.5; iTunes will report that it found an iPhone in recovery mode; press the restore button WHILE holding the SHIFT-key; in the upcoming filechooser just choose the 1.1.1-firmware-file (iPhone1,1_1.1.1_3A109a_Restore.ipsw) you just downloaded; iTunes will now downgrade the iPhone to 1.1.1 (which may take a while) and then report the errorcode 1015 or 1011, which is not important and can be dismissed.


    4. shut down iTunes


    STEP 1 - DONE!


    -------------------------------------------------------------------------------------------------------------------------

    STEP 2 - JAILBREAK and ACTIVATION


    1. download iBrickr here:

    http://ibrickr.com/downloads/ibrickr_v0.91.zip


    2. Unzip it to a folder of your choice on your PC


    3. start iBrickr it will prompt you on how to get your phone out of recovery mode.


    4. Assuming that you got the "activate" screen slide to unlock to the emergency keypad, dial *#307#, the phone will ring, then press backspace to clear the numbers, then press 1, then dial, the phone will ring again, press answer, then press hold, the phone will ring again, press dismiss, then go to contacts, add 2 contacts, one is: name p and url prefs://1F and the other is name j and url http://jailbreakme.com, save them and go to contact p and click on prefs://1F, this will take to set up your Wi-Fi, make sure you are connected to Wi-Fi and press home button, this will take you to the "activate" screen, slide to unlock, then dial 1, the phone will ring, answer and then press hold, it will ring again, then press dismiss, that will take you to contacts again....


    5. start iTunes, so that it can "see" your iPhone, but donīt let iTunes do anything with the phone, this will help performing the jailbreak now to follow in step 2/6


    6. now select contact j and click on url http://jailbreakme.com. this will open the browser to AppSnapp Webapp site, just choose "Install AppSnapp" at the bottom of the site, safari wil crash and then you will have to wait about 2 minutes, the phone will restart and you should have a jailbroken 1.1.1. Close iTunes.


    7. on your iPhone click Installer (blue icon) and check if you are prompted to update the installer / if an update is available; if yes, just do so (after it is done click the home button and wait for the iPhone to do a soft reset then slide to unlock.); if no, proceed to next step.


    8. (on your phone click Installer (blue icon) and) install Oktoprep, it is under Tweaks 1.1.1., and wait for it to say it is ok blah blah blah, then press home button and wait for a soft reset. (( do not restart phone ))


    9. download 1.1.2 firmware here:
    http://appldnld.apple.com.edgesuite....b_Restore.ipsw


    10. start iTunes, it should prompt if you wish to update to the latest firmware version (!!! which is 1.1.3 as of January 15th !!!!!!) - DO NOT DO THAT !!!! but press the SHIFT-key AND while holding the SHIFT-key click on UPDATE. In the upcoming filechooser you should choose the just downloaded 1.1.2-firmware-file ("iPhone1,1_1.1.2_3B48b_Restore"); iTunes will now update your iPhone back to 1.1.2


    11. shut down iTunes


    12. download and unpack this:
    http://conceitedsoftware.com/iphone/1.1.2-jailbreak.zip


    13. open "jailbreak.jar" (latest JAVA has to be installed) and wait til the process is finished, iPhone will reboot twice during this. - (if jailbreak.jar does not work, try windows.bat)


    STEP 2 - DONE! Your iPhone is now jailbroken and activated running 1.1.2
    -------------------------------------------------------------------------------------------------------------------------

    STEP 3 - PREPARING and INSTALLING THE TURBOSIM


    1. on your iPhone, go to Settings -> General -> Auto Lock -> Never


    2. connect your iPhone to your WLAN (write down the IP your iPhone will have in your WLAN!) IMPORTANT: Only proceed further on in a WLAN-environment that will insure that the phone will retrieve the SAME IP via DHCP AGAIN AFTER THE NEXT REBOOT! Otherwise you will get stuck at STEP 3/15, cause the IP might have changed, e.g. in huge WLANs. If you are unsure then do this: on your iphone, after it acquires its IP address through DHCP, change the mode from DHCP to Static before you go on with the tutorial.


    3. on your iPhone, start the Installer and install the following: BSD Subsystem / CommunitySources / openSSH


    4. download and unzip this to your PC:

    http://rapid_share.com/files/7197445..._rev2.zip.html

    (maybe in the domainname there is a _ which needs to be removed....)


    5. download and open WinSCP (if you donīt have it already) here:

    http://winscp.net/download/winscp405setup.exe


    6. with WinSCP connect to your iPhone; Protocol: SFTP / Port:22 / Server: your iPhonesī IP (see above) / Username: root / Password: alpine


    7. use WinSCP to copy the file "applesaft.trb" (from the folder turbosim_rev2) to the iPhone-folder /private/var/root


    8. use WinSCP to copy all OTHER files (except "applesaft.trb") (from the folder turbosim_rev2) to the iPhone-folder /bin


    9. mark the copied files in the folder /bin, right-click them, select "Properties" (or similar) and give them 0755-rights (owner: RWX / group: RX / others: RX)


    10. close WinSCP, then download PuTTy here:

    http://the.earth.li/~sgtatham/putty/.../x86/putty.exe


    11. cut out both SIMs, the original one supplied with the phone and your own, so they will fit perfectly into the TurboSim - do it carefully!


    12. put the original SIM supplied with the iPhone (not your own!) onto the TurboSim and carefully insert it into your iPhone


    13. start PuTTy and connect using your iPhone IP address as the host name.


    14. PuTTy should ask for a username, so type "root", then it asks for the root-password, which is "alpine" - so type "alpine" and hit Enter


    15. type "launchctl unload /System/Library/LaunchDaemons/com.apple.CommCenter.plist"


    16. type "turbo-info" and hit Enter - some numbers should appear (also maybe some "error" blah blah), but in the end finally followed by an "OK. no errors"


    17. type "turbo-app /private/var/root/applesaft.trb" ; after that an "OK" should appear!
    IF instead "BAD FILE" will be reported please try again but this time type "turbo-app -b57600 -v /private/var/root/applesaft.trb"
    IF that still wont work, meaning you get no "OK" in the end, please PM me! I am searching for a solution for this problem right now!


    18. type "launchctl load /System/Library/LaunchDaemons/com.apple.CommCenter.plist"


    19. restart your iPhone (BUT only if that last commandline got NO bad response!)


    20. on your iPhone go to Settings -> Phone -> SIM Applications -> Apple Saft -> Set -> Accept


    21. remove TurboSim and original SIM from the iPhone (carefully!)


    22. replace the original SIM with your own and put TurboSIM and your own SIM back into the iPhone (carefully!)


    23. restart your iPhone


    STEP 3 - DONE! Your iPhone should now be fully operational,

    ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

    with greetings and respect to nikimere and all who contributed.
    iMaso
    Last edited by iMaso; 01-23-2008 at 10:05 PM.

  4. #4
    Rookie Array Tevez's Avatar

    Join Date
    Nov 2007
    Posts
    18
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    Step 1.4 in the Mac version where I'm going to choose the MobileDevice Framework.... which file or what should I choose when I'm opening the iNdependence MobDev Tool...?

  5. #5
    Senior Professional Array

    Join Date
    Nov 2007
    Location
    Sydney - Australia
    Posts
    125
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    13

    Default

    @Tevez: get it here
    http://users.tpg.com.au/duyvan82/Mob....framework.zip
    unzip and put it somewhere on your hard drive (I would recommend in the same folder as iNdependence.app)


  6. #6
    Rookie Array Tevez's Avatar

    Join Date
    Nov 2007
    Posts
    18
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    I have it, thats not the problem, hehe... What shall I do with it...? I don't know what to do when I've launched the iNdependence MobDev Tool...

  7. #7
    Senior Professional Array

    Join Date
    Nov 2007
    Location
    Sydney - Australia
    Posts
    125
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    13

    Default

    that file is only needed if you're running iTunes 7.5
    if this is the case, launch Independence MobDev Tool, it'll ask you for that file.

    Hope this helps
    Last edited by duyvan82; 11-29-2007 at 11:44 AM.

  8. #8
    Respected Professional Array iMaso's Avatar

    Join Date
    Nov 2007
    Posts
    581
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    37

    Default

    Quote Originally Posted by duyvan82 View Post
    that file is only needed if you're running iTunes 7.5
    if this is the case, independence should prompt you to choose that file. That's what it did on my Mac the first time I launched it
    i believe his problem is that he does not know which file to choose, saying he should actually choose not a FILE but the FOLDER which is called MobileDevice_7_4_2.framework, and NOT a file which is INSIDE this folder.

    right ?

  9. #9
    Rookie Array Tevez's Avatar

    Join Date
    Nov 2007
    Posts
    18
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    Yes, I'm running iTunes 7.5 yes... but that file (MobileDevice_7_4_2.framework) is a folder, not a single file.... What to do? When I open iNdependence tool, I have to select something...


    @iMaso: Yepp, thats corretct, thats my problem! What do I have to to, iMaso?

  10. #10
    Senior Professional Array

    Join Date
    Nov 2007
    Location
    Sydney - Australia
    Posts
    125
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    13

    Default

    ok choose that folder (MobileDevice_7_4_2.framework), click OK, then choose independence.app and click OK again. It should be working for you now


 

 

Similar Threads

  1. Best tutorial 1.1.2 Turbosim unlocking
    By lionmanpt in forum Turbo-, Supersim and Simcloning Solution
    Replies: 1
    Last Post: 02-11-2008, 11:39 PM
  2. IMPORTANT - TUTORIAL FOR 1.1.1 USER with TURBOSIM
    By user82 in forum Turbo-, Supersim and Simcloning Solution
    Replies: 1
    Last Post: 10-03-2007, 06:55 PM
  3. Turbosim with a Mac tutorial ?
    By Louis in forum Turbo-, Supersim and Simcloning Solution
    Replies: 2
    Last Post: 08-18-2007, 09:37 PM
  4. TurboSIM tutorial and irc
    By spoonet in forum Turbo-, Supersim and Simcloning Solution
    Replies: 0
    Last Post: 08-12-2007, 10:12 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBulletin®
Copyright © 2014 vBulletin Solutions, Inc. All rights reserved.
Search Engine Friendly URLs by vBSEO
(c) 2006-2012 Hackint0sh.org
All times are GMT +2. The time now is 04:40 AM.
twitter, follow us!