Page 1 of 4 1234 LastLast
Results 1 to 10 of 36
Like Tree1Likes
Discuss Ultra Recyle - PwnageTool 4.1.3 Unlock Edition / DevTeam at the PwnageTool - Hackint0sh.org; ...
  1. #1
    Moderator Array vikram's Avatar

    Join Date
    Feb 2008
    Posts
    258
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default Ultra Recyle - PwnageTool 4.1.3 Unlock Edition / DevTeam

    Ultra-recycle

    Today we’re pleased to announce our free carrier unlock for iPhone3G/3GS owners with a baseband later than 05.13.04. The unlock for that baseband exploited the AT+XAPP command, thanks to a crash initially discovered by @sherif_hashim (@Oranav also found this crash). So what hole are we exploiting today, since Apple closed that AT+XAPP hole? Well, we’re exploiting the exact same hole!

    It turns out that the very first iPad firmware 3.2.2 has baseband version 06.15.00 still vulnerable to AT+XAPP. The iPad baseband is built for the exact same baseband chip as the iPhone3G/3GS — they’re fully compatible! Some of us have been running 06.15 for weeks now on our iPhones in preparation for this release.

    Since 06.15 is a higher version than 05.14 or 05.15 (where AT+XAPP is gone), anyone stuck at those versions can simply upgrade to 06.15 to unlock again! Luckily for us, Apple *still* provides the iPad FW 3.2.2 with this vulnerable baseband right from their own servers. (Grab it now, before they take it down!)

    We’ve been busy updating both PwnageTool and redsn0w to make the baseband update as seamless as possible.

    1. First up is “PwnageTool 4.1.3 Unlock Edition”. It has a special dialog box which will ask you if you want to update to the iPad baseband. You must already have the iPad 3.2.2 IPSW on your computer (see the above link)….so just point PwnageTool at it (or let it find it on its own if you’re in “simple” mode).
    2. Directly after PwnageTool 4.1.3 is available, the official ultrasn0w repo ultrasn0w.com will be updated with ultrasn0w 1.2, which covers iPhone 4 baseband 01.59.00 and iPhone 3G/3GS basebands 04.26.08, 05.11.07, 05.12.01, 05.13.04 and now 06.15.00.
    3. Finally, we’ll release an update to redsn0w today for those without Macs and can’t run PwnageTool. The new redsn0w will give you the option to update your baseband to 06.15 too.

    WARNING — YOU DO THIS AT YOUR OWN RISK! PLEASE UNDERSTAND THE CONSEQUENCES OF UPDATING TO 06.15.

    1. There is no way to come back down from 06.15, and there’s no hiding the baseband version from Apple. You’ll be voiding your warranty in a very obvious way.
    2. If some future baseband comes out with a critical fix, you won’t be able to update to it if it remains down in the 05.xx sequence (then again, you wouldn’t update to it if you wanted to keep your unlock anyway).
    3. Starting with FW 4.2.1 if you have 06.15 on your iPhone you won’t ever be able to restore to stock firmware (it will fail). You’ll need to only restore to custom IPSWs (then again, if you’re unlocker you should already be doing that).

    Certainly don’t update to 06.15 if you don’t need to! Only do this if you need the unlock and you’re stuck on 05.14 or 05.15, and you’re willing to assume the above risks.

    This PwnageTool also contains a 4.2.1 bundle for iPhone3G owners…for all else, it’s still only 4.1. If you have an iPhone3GS with an old bootrom, the new redsn0w will handle 4.2.1 for you (in fact it covers 4.2.1 for all devices, even though some of them are still tethered at 4.2.1 until @comex can work some untethering magic). iPhone3GS users with old bootroms who want to go to 4.2.1 should not use this PwnageTool! Update to stock 4.2.1 first, then use the upcoming redsn0w to update your baseband.

    Please feel free to use our comments section for questions. We have some very knowledgeable and helpful moderators: angiepangie, Confucious, dhlizard, and Frank55!

    Official Bittorrent Releases

    PwnageTool 4.1.3 - http://torrents.thepiratebay.org/599...02.TPB.torrent
    SHA1 Sum = adda6d882dce1b5117d01586037de289407e038a

    Unofficial Mirrors

    The following links are unofficial download mirrors, you download these archives at your own risk, we accept no responsibility if your computer explodes or if it becomes part of a NASA attacking botnet or even worse if your hands fall off mid-way during the use of these files. We do not check these links and we accept no responsibility with regard to the validity of the files, the other content that these links may provide or with the content that is on the third-party linked site.

    Always check the files that you have downloaded against our published SHA1 hash.

    We would prefer that you downloaded the official bittorrent release that is linked above, but you are welcome to try these if you really must.

    Mirror owners should email direct dmg download links only (no rapidshare type sites please) to blog@iphone-dev.org — please don’t place mirrors in the comments as they will be deleted
    Last edited by vikram; 11-28-2010 at 10:31 PM.



  2. #2
    Moderator Array vikram's Avatar

    Join Date
    Feb 2008
    Posts
    258
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default i haz success



    updated with great ease, zero problems

  3. #3
    Senior Professional Array

    Join Date
    Nov 2007
    Posts
    107
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    12

    Default

    uhm I thought it was going to unlock 05.14 :\ well... better than nothing

  4. #4
    Super Moderator Array Olethros's Avatar

    Join Date
    Sep 2007
    Location
    Norway
    Posts
    8,360
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    439

    Default

    Quote Originally Posted by baro View Post
    uhm I thought it was going to unlock 05.14 :\ well... better than nothing
    So did we all, but this is a "smart" move on the iPhone dev teams part.

    It achieves three goals

    1. Offers an unlock without wasting another valuable exploit
    2. Forces unlockers to stay on the pwnagetrain (which is where they should be)
    3. Makes it much harder for users to "accidentally upgrade and lose unlock"


    So don't complain.
    Please read the stickies & search forum before posting!
    How to report an iTunes restore/update fail in a useful manner
    -

    iPad 3G 64GB (4.3.3, Redsn0w) oldest SHSH 3.2.2
    iPhone 4 32GB (4.2.1, Redsn0w JB-monte) oldest SHSH 4.1
    iPhone 3GS 32GB (4.3.3; Pwnagetool) factory unlocked oldest SHSH 3.1
    iPhone 8GB (3.1.3; Pwnagetool) AT&T Locked - Unlocked with bootneuter

    -
    Did we solve your problem? Got a dollar or two spare ? Donate!

  5. #5
    Moderator Array vikram's Avatar

    Join Date
    Feb 2008
    Posts
    258
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    Quote Originally Posted by Olethros View Post
    So did we all, but this is a "smart" move on the iPhone dev teams part.

    It achieves three goals

    1. Offers an unlock without wasting another valuable exploit
    2. Forces unlockers to stay on the pwnagetrain (which is where they should be)
    3. Makes it much harder for users to "accidentally upgrade and lose unlock"


    So don't complain.
    100% agree with Olethros.
    This was the smartest/ultimate unlocking procedure.


  6. #6
    Senior Professional Array

    Join Date
    Nov 2007
    Posts
    107
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    12

    Default

    well, I wasn't complain (just to make it clear)
    I was actually expecting a new unlock not before fw 5.X
    it's a nice present

  7. #7
    Newbie Array

    Join Date
    Nov 2010
    Posts
    1
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default PWNAGE Tool 4.1.3

    Can anyone confirm that the new pwnage tool hacktivates iphone 3G without baseband update. Im moving from 4.1 to 4.2.1 bb:05.13

  8. #8
    Super Moderator Array Olethros's Avatar

    Join Date
    Sep 2007
    Location
    Norway
    Posts
    8,360
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    439

    Default

    Quote Originally Posted by sidhant92 View Post
    Can anyone confirm that the new pwnage tool hacktivates iphone 3G without baseband update. Im moving from 4.1 to 4.2.1 bb:05.13
    If you choose the correct options (choose activation in expert mode or say no to "can you activate normally via iTunes" question in normal mode) - yes this will do what you want.
    Please read the stickies & search forum before posting!
    How to report an iTunes restore/update fail in a useful manner
    -

    iPad 3G 64GB (4.3.3, Redsn0w) oldest SHSH 3.2.2
    iPhone 4 32GB (4.2.1, Redsn0w JB-monte) oldest SHSH 4.1
    iPhone 3GS 32GB (4.3.3; Pwnagetool) factory unlocked oldest SHSH 3.1
    iPhone 8GB (3.1.3; Pwnagetool) AT&T Locked - Unlocked with bootneuter

    -
    Did we solve your problem? Got a dollar or two spare ? Donate!

  9. #9
    Senior Professional Array

    Join Date
    Feb 2010
    Posts
    132
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    11

    Default

    So basically I can upgrade to 4.2 and keep the unlock, did I get that right? I currently use a 3GS unlocked on 4.1 - 05.13.04. I would like to upgrade to 4.2 and unlock. As of what I understood the steps for my specific application would be:
    - I have to download iPad's 3.2.2 firmware.
    - Download Pwnage tool 4.1.3 unlock edition.
    - Select "upgrade to iPad baseband" and point Pwnage tool to iPad's 3.2.2 FW.
    - Do the custom fw build.
    - Ultrasn0w will automatically update to 1.2 ??
    - Restore in iTunes to the custom fw.

    Is that correct or am I missing something? No iPhone firmware download needed? I dont want to screw up my phone, so I wanna make sure I did get it right.
    Thank you guys !

  10. #10
    Super Moderator Array Olethros's Avatar

    Join Date
    Sep 2007
    Location
    Norway
    Posts
    8,360
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    439

    Default

    Quote Originally Posted by LS6_5SPD View Post
    So basically I can upgrade to 4.2 and keep the unlock, did I get that right? I currently use a 3GS unlocked on 4.1 - 05.13.04. I would like to upgrade to 4.2 and unlock. As of what I understood the steps for my specific application would be:
    - I have to download iPad's 3.2.2 firmware.
    - Download Pwnage tool 4.1.3 unlock edition.
    - Select "upgrade to iPad baseband" and point Pwnage tool to iPad's 3.2.2 FW.
    - Do the custom fw build.
    - Ultrasn0w will automatically update to 1.2 ??
    - Restore in iTunes to the custom fw.

    Is that correct or am I missing something? No iPhone firmware download needed? I dont want to screw up my phone, so I wanna make sure I did get it right.
    No, you are mistaken. Your approach is not good. It is not the best, least complex (or lowest risk) way to get achieve your goal.

    you do not need to use the iPad baseband solution to stay unlocked

    As long as you have an old bootrom 3GS, you can restore to 4.2.1 via pwnagetool custom IPSW and unlock on the same baseband you currently run.

    If you have a new bootrom 3GS, you should STAY ON 4.1 for now. This is because 4.2.1 is a currently tethered jailbreak for new bootrom 3GS. A tethered jailbreak combined with unlock is not something that is practical for most people who simply want their phone to work.

    Also you will need to restore your iPhone again when the untethered jailbreak for 4.2.1 eventually becomes available.

    It is safer/less stress to simply WAIT for the untethered jailbreak to be released.

    There is ABSOLUTELY NO REASON for you to update your baseband past 05.13.04.

    Please don't think in terms "upgrade" or "update" as this gives you the wrong idea. What you should do (if you have an old bootrom) is a restore, with a pwnagetool custom 4.2.1 IPSW.

    This does result in you running a newer iOS version but you have not done an "in-place update" to get there.

    The reason I am so pedantic with terms, is that an update via iTunes will also update your baseband and cause you to have no choice but to use the iPad baseband solution.
    Please read the stickies & search forum before posting!
    How to report an iTunes restore/update fail in a useful manner
    -

    iPad 3G 64GB (4.3.3, Redsn0w) oldest SHSH 3.2.2
    iPhone 4 32GB (4.2.1, Redsn0w JB-monte) oldest SHSH 4.1
    iPhone 3GS 32GB (4.3.3; Pwnagetool) factory unlocked oldest SHSH 3.1
    iPhone 8GB (3.1.3; Pwnagetool) AT&T Locked - Unlocked with bootneuter

    -
    Did we solve your problem? Got a dollar or two spare ? Donate!


 

 
Page 1 of 4 1234 LastLast

Similar Threads

  1. Haing trouble with PwnageTool 4.1.3 unlock edition
    By Bernoulli85 in forum PwnageTool
    Replies: 2
    Last Post: 02-16-2011, 01:45 PM
  2. MacNN: OCZ adds ultra-fast Vertex Limited Edition SSD
    By hackint0sh in forum Latest Headlines
    Replies: 0
    Last Post: 02-18-2010, 04:50 PM
  3. devteam anysim able to unlock BL 3.9 1.1.2 ?
    By zod in forum iPhone "2G" (Rev. 1)
    Replies: 3
    Last Post: 12-26-2007, 08:21 PM
  4. Whats the progress on DevTeam unlock?
    By PSLiNK in forum General
    Replies: 27
    Last Post: 08-26-2007, 07:43 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBulletin®
Copyright © 2014 vBulletin Solutions, Inc. All rights reserved.
Search Engine Friendly URLs by vBSEO
(c) 2006-2012 Hackint0sh.org
All times are GMT +2. The time now is 09:26 AM.
twitter, follow us!