Page 10 of 28 FirstFirst 1234567891011121314151617181920 ... LastLast
Results 91 to 100 of 277
Discuss [PwnageTool] FAQ and How To Guide at the PwnageTool - Hackint0sh.org; Ok so i tried this on another computer and it works almost perfectly this time. ...
  1. #91
    Rookie Array

    Join Date
    Apr 2008
    Posts
    16
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    Ok so i tried this on another computer and it works almost perfectly this time. So i made the custom 1.1.4 firmware in about a 40 minutes. I go through all the process and pwn it and its all working well. Now when i go to itunes and restore it with the custom firmware it all works but at the end it says Verifying Firmware or something like that and it cancels the restore and says unable to restore. I tred iliberty to kick it out of restore but most things on it do now work and each time u restart it it goes back to recovery mode. Any ideas?


  2. #92
    Newbie Array

    Join Date
    Apr 2008
    Posts
    7
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default Will this work?

    I've spent a few hours over the last few days reading through all the forums here; there's a wealth of information that has really helped me better understand the whole unlock/jailbreak thing.

    I'm an XP user and I have a number of friends who use MACs. I'm about to get my first iPhone shipped up from a buddy of mine who lives in the States. I wanted to use Pwnage to a/j/u it...however I don't want to wait for Winwpn (based upon what I've read, I feel more comfortable using the devteam's app; the ported app still seems too buggy to me!)

    If I install pwnage on a buddy's macbook, pwn my phone and build a custom ipsw, then copy the ipsw over to my windows machine, I should be able to use my windows iTunes to restore the firmware, correct? I would then only need my buddy's machine whenver I needed to create new ipsws (perhaps when 2.0 is officially released)??

    Is there any reason why this wouldn't work, or is there there a complication I haven't considered?

    Thanks!

  3. #93
    Senior Professional Array

    Join Date
    Apr 2008
    Posts
    146
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    14

    Default

    Yes it'll work.

    Also you can use winpwn. Bootneuter isn't currently implemented but you can download it after to flash the bootloader, unlock etc

  4. #94
    Senior Professional Array

    Join Date
    Sep 2007
    Posts
    243
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    21

    Default

    I used Ziphone 1.x to unlock my 1.1.4. I have used winpwn to make and upload a cusmtom firmware image. However after doing so my phone remains unlock. Is this because the BB part has not been changed? If I was to use bootneuter to unlock my phone, will it undo the changes made by Ziphone?

  5. #95
    Senior Professional Array

    Join Date
    Apr 2008
    Posts
    146
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    14

    Default

    Did you restore to 1.1.4 after the Ziphine unlock?

    Winpwn will create the custom 1.1.4 IPSW but wont give you bootneuter so just download the bootneuter app to flash the bootloader and unlock.


  6. #96
    Senior Professional Array

    Join Date
    Sep 2007
    Posts
    243
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    21

    Default

    Quote Originally Posted by NSLog View Post
    Did you restore to 1.1.4 after the Ziphine unlock?

    Winpwn will create the custom 1.1.4 IPSW but wont give you bootneuter so just download the bootneuter app to flash the bootloader and unlock.
    Yup, I first restored to a stock 1.1.4, pwned, and then restored the new 1.1.4 image I made. The ziphone lock carried over it seems. Am I best off leaving it the way it is, or should I run bootneuter?

  7. #97
    Rookie Array

    Join Date
    Apr 2008
    Posts
    16
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default What Happened

    Ok I went through the whole process and everything went fine except that I don't have cell phone service right now...I have the bars but under network it shows unavaliable...Whaat can I do to fix this...??

  8. #98
    Amazingly Knowledgeable Array

    Join Date
    Oct 2007
    Posts
    790
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    54

    Default

    @Kasakato: IF ZiPhone downgraded your bootloader then you can use bootneuter to get it back to what it was originally - but unless you have warranty issues I don't think its worthit if your still unlocked.

    @big_coop69: If you used BootNeuter and it successfully finished its job then a simple case of turning the phone off and on should sort out your problem.

    Remember everyone if you have a problem we need to know in as much detail as possible as there are lots of different factors that can change our advice and we are really just guessing if you don't tell us EVERYTHING!
    iPhone US 8GB
    FW 1.0.2--> iUnlock--> iPhoneSIMfree--> 1.1.1 --> 1.1.2--> Soft upgrade 1.1.3 --> 1.1.4 using signal.app
    iPhone UK 16GB
    FW 1.1.3 OOB --> 1.1.4 --> iPlus 1.2 unlocked!

    <----If I helped you out, rep points are always nice (thanks for that idea!)

  9. #99
    Senior Professional Array

    Join Date
    Sep 2007
    Posts
    243
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    21

    Default

    Quote Originally Posted by Spinstorm View Post
    @Kasakato: IF ZiPhone downgraded your bootloader then you can use bootneuter to get it back to what it was originally - but unless you have warranty issues I don't think its worthit if your still unlocked.

    @big_coop69: If you used BootNeuter and it successfully finished its job then a simple case of turning the phone off and on should sort out your problem.

    Remember everyone if you have a problem we need to know in as much detail as possible as there are lots of different factors that can change our advice and we are really just guessing if you don't tell us EVERYTHING!
    I started off at 3.9, and still have 3.9. Does this mean I currently have a ziphone hacked 3.9BL? Is this a problem, and will using boot neuter override the ziphone hack?

  10. #100
    Rookie Array

    Join Date
    Apr 2008
    Posts
    16
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    Hi again. This time i got it to work almost perfectly. I did all the steps and it all worked. I now am in itunes and i backed up my ipod and went to sync it but instead of going to the normal sync screen it stays with the rainbow apple ipwned with winpwn boot logo. Is this normal or a beta problem?

    Edit: Now my itunes isnt detecting the iphone.
    Last edited by ratdog123; 04-21-2008 at 05:24 AM.


 

 

Similar Threads

  1. Jailbreak iOS 4.0 with PwnageTool Complete How to Guide
    By Zack1mx in forum iOS 4.x (iPhone OS 4.x)
    Replies: 12
    Last Post: 07-22-2010, 04:48 PM
  2. Pwnage Guide: PwnageTool: Jailbreak iPhone 3G
    By Spinstorm in forum PwnageTool
    Replies: 1
    Last Post: 08-27-2008, 05:00 PM
  3. Replies: 20
    Last Post: 07-24-2008, 11:31 PM
  4. Replies: 1
    Last Post: 01-26-2008, 02:31 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBulletin®
Copyright © 2014 vBulletin Solutions, Inc. All rights reserved.
Search Engine Friendly URLs by vBSEO
(c) 2006-2012 Hackint0sh.org
All times are GMT +2. The time now is 07:10 AM.
twitter, follow us!