Toshiba M55-S135: GMA900 Kexts [FOUND and work with Quartz Extreme and OpenGL!]

**motionman95** · 11-06-2008 03:54 AM

If you have Toshiba M55-S135, or just a GMA900 (915/910) like me, use this! I you want the kexts, just post here and I'll attach them! (I'm currently in XP and am updating, so I can't boot to Mac. So I'll just wait to see if anybody wants them first!)

Thanks!

**CJBEDM** · 11-17-2008 01:09 AM

Does these kexts enable multiple resolution for the GMA's rather than stuck at 1024x768?

**motionman95** · 11-17-2008 06:30 AM

Well the kexts are, as the title implies, for the GMA900 (915/910). But yes, they do give me multiple resolutions, and I can easily switch between them.

**geolaw** · 12-17-2008 05:04 PM

pretty pleeze!

**icchansan** · 12-17-2008 11:13 PM

Originally Posted by motionman95

If you have Toshiba M55-S135, or just a GMA900 (915/910) like me, use this! I you want the kexts, just post here and I'll attach them! (I'm currently in XP and am updating, so I can't boot to Mac. So I'll just wait to see if anybody wants them first!)

Thanks!

Good to hear this motionman95, can you please upload this to rapidshare or something? it will help other users...

**motionman95** · 12-18-2008 03:22 AM

Use this instead:

Guys, sorry for not putting this online earlier ..
David Elliott has given us this enabler kext to be used with the stock GMA950 kexts on leopard.
It forces the GMA950 driver to work with GMA900, so you don't need any hacked kexts anymore (only the old version 4.2.20.28 intel framebuffer kext is required).

This is only for dev.id 0x8086 0x2592. If you need other devIDs let me know.

**gagolak** · 04-28-2009 07:21 PM

Can you send me this driver? I have an intel mobile 945 and i hope to get more than 1024x768 lol

Thanks

**loafer987** · 05-13-2009 03:52 AM

I have GMA 965. If this works for me please let me know. Thanks!
P.S. I am running 10.5.2. Dunno if that is a problem.

**gsorozco** · 05-31-2009 10:29 PM

Kind of new to this. I have and Acer A150 with GMA display. I used the kexts provided with iatkos v5i and the screen is unintelligable (not even text). The Graphics device ID is 0x27ae. I've tried booting with only the Realtek Network driver like the instruction (from insanely.mac) say - nada. Also tried using the VGA GMA950b driver same results. Sure could use some help here. Thanks much.

**nimavafi** · 06-10-2009 02:49 AM

I need these too!!

I tried the ones that came with ideneb 1.4 10.5.6 with no luck.
Stuck at 1024x768 and no QE...

Where are the kexts OP was supposed to link>?

Note: I am able to install and everything goes fine, but I cannot use Front Row and I think its because i need these kexts.