Page 1 of 3 123 LastLast
Results 1 to 10 of 24
Discuss Post Installation Problems at the Kernel / Kext (Driver) Support - Hackint0sh.org; Hello! After some great tips, tricks and guides found here and on the wiki - ...
  1. #1
    Newbie Array

    Join Date
    Dec 2008
    Posts
    1
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Smile Post Installation Problems

    Hello!

    After some great tips, tricks and guides found here and on the wiki - i went ahead and installed Mac OS X 10.5.2 (the Kalyway disc). Installed with no problems (to an old external USB drive from an old IDE DVD drive) and it boots just fine.

    My system specs:
    Aus P5LD2 SSE3 Motherboard
    nVidia XFX 7600 GS 256MB Graphics card
    4GB DDR2 667mhz RAM
    Intel Core 2 Duo 2.0 Ghz E4400 CPU
    Assortment of NFTS formatted drives

    Just some problems that need to be fixed:
    -Shut down gives a message with a 60-second timer. No matter what i press (even the power button on my computer) nothing happens. Shut down does not work.

    -Restart does not work (neither does the restart button on the computer itself)

    -Sleep makes the computer go into sleep mode (hard drives shut down, fans stop spinning etc.); but the screen stays on displaying the desktop and it won't come out of sleep mode at all (just a frozen screen - no mouse movement).

    -Sound does not work. Under sound settings there is no output or input device detected. I installed the Realtek driver and ALC883 (or something similar) during installation of the Kalyway disc.

    -Display Resoultion is stuck on 1024x768. My (LCD) monitor's optimum resolution is 1280x1024, but under system preferences 1024x768 is the only option there is. How can i fix this?

    Solutions to the above problems would be much appreciated - sound and display resolution are the most important at the moment.

    Thanks very much for any solutions and thanks for the great community!

    Extra notes:
    My motherboard uses a Realtek sound card (built into the motherboard).
    I installed a plain 'nVinject' kext during installation.
    I installed the defualt kernel as used in this http://wiki.osx86project.org/wiki/in...ualBoot_10.5.2 guide (think its the sleep kernel).



  2. #2
    Hackint0sh Moderator Array icchansan's Avatar

    Join Date
    Sep 2007
    Location
    Puerto Ordaz, Venezuela, Venezuela
    Posts
    6,641
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    349

    Default

    For Shutdown/Restart/Sleep there some fix, google them, try to update to 10.5.5 to get better support with it

    For Video Check here

    Try this for Audio
    HP Pavilion Elite m9250f
    Snow Leopard 10.6.6, Asus IPIBL-LB MOD BIOS, Intel Quad Core Q6600, 4GB RAM (800mhz), 2x500GB, nVidia 8600GT (Works), ALC888S (Works), Wireless RT73 (Works), LAN (Works) - How to Install - Blog - Hardware Combos - FAQ by TJ2K7
    Macbook Pro 13"
    iPhone 4
    Follow meh: @icchansan

    If you just want to support hackint0sh.org with a donation click here

  3. #3
    Advanced Array

    Join Date
    Jan 2009
    Location
    Detroit
    Posts
    40
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    Quote Originally Posted by icchansan View Post
    For Shutdown/Restart/Sleep there some fix, google them, try to update to 10.5.5 to get better support with it

    For Video Check here

    Try this for Audio

    Hello there. . . I'm still having trouble with getting ALC888/3/ whatever to work. The HCL says that I should use ALC888 for my nVidia 630i motherboard. However, I did a Linux Codec Dump and it says I have ALC883.

    I've tried installing AppleHDA.kext and patching it with Taruga, as well as what seems like every other option out there. . . right now I'm bout ready to just sing all my songs instead of fussin around with this damn hell ass computer anymore. . . .

    What other steps do I have to do in order to get this driver to work?

    Thanks!
    -Thomas

  4. #4
    Hackint0sh Moderator Array icchansan's Avatar

    Join Date
    Sep 2007
    Location
    Puerto Ordaz, Venezuela, Venezuela
    Posts
    6,641
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    349

    Default

    is a package theres no steps...
    HP Pavilion Elite m9250f
    Snow Leopard 10.6.6, Asus IPIBL-LB MOD BIOS, Intel Quad Core Q6600, 4GB RAM (800mhz), 2x500GB, nVidia 8600GT (Works), ALC888S (Works), Wireless RT73 (Works), LAN (Works) - How to Install - Blog - Hardware Combos - FAQ by TJ2K7
    Macbook Pro 13"
    iPhone 4
    Follow meh: @icchansan

    If you just want to support hackint0sh.org with a donation click here

  5. #5
    Advanced Array

    Join Date
    Jan 2009
    Location
    Detroit
    Posts
    40
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    OK I'm still not getting audio.

    System Profiler info:
    Intel High Definition Audio:

    Device ID: 0x10DE07FC
    Audio ID: 12
    Available Devices:
    Codec Dump
    Codec: Realtek ALC883
    Address: 0
    Vendor Id: 0x10ec0883
    Subsystem Id: 0x10ec0000
    Revision Id: 0x100002
    No Modem Function Group found
    Default PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
    Default Amp-In caps: N/A
    Default Amp-Out caps: N/A
    Node 0x02 [Audio Output] wcaps 0x11: Stereo
    PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
    Node 0x03 [Audio Output] wcaps 0x11: Stereo
    PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
    Node 0x04 [Audio Output] wcaps 0x11: Stereo
    PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
    Node 0x05 [Audio Output] wcaps 0x11: Stereo
    PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
    Node 0x06 [Audio Output] wcaps 0x211: Stereo Digital
    PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0x1e]: 16 20 24 32
    formats [0x1]: PCM
    Node 0x07 [Vendor Defined Widget] wcaps 0xf00000: Mono
    Node 0x08 [Audio Input] wcaps 0x10011b: Stereo Amp-In
    Amp-In caps: ofs=0x08, nsteps=0x1f, stepsize=0x05, mute=1
    Amp-In vals: [0x00 0x00]
    PCM:
    rates [0x160]: 44100 48000 96000
    bits [0x6]: 16 20
    formats [0x1]: PCM
    Connection: 1
    0x23
    Node 0x09 [Audio Input] wcaps 0x10011b: Stereo Amp-In
    Amp-In caps: ofs=0x08, nsteps=0x1f, stepsize=0x05, mute=1
    Amp-In vals: [0x00 0x00]
    PCM:
    rates [0x160]: 44100 48000 96000
    bits [0x6]: 16 20
    formats [0x1]: PCM
    Connection: 1
    0x22
    Node 0x0a [Audio Input] wcaps 0x100391: Stereo Digital
    PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0x1e]: 16 20 24 32
    formats [0x1]: PCM
    Connection: 1
    0x1f
    Node 0x0b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
    Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
    Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
    Connection: 10
    0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17
    Node 0x0c [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
    Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
    Amp-In vals: [0x00 0x00] [0x00 0x00]
    Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0
    Amp-Out vals: [0x19 0x19]
    Connection: 2
    0x02 0x0b
    Node 0x0d [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
    Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
    Amp-In vals: [0x00 0x00] [0x00 0x00]
    Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0
    Amp-Out vals: [0x00 0x00]
    Connection: 2
    0x03 0x0b
    Node 0x0e [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
    Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
    Amp-In vals: [0x00 0x00] [0x00 0x00]
    Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0
    Amp-Out vals: [0x00 0x00]
    Connection: 2
    0x04 0x0b
    Node 0x0f [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
    Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
    Amp-In vals: [0x00 0x00] [0x00 0x00]
    Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0
    Amp-Out vals: [0x00 0x00]
    Connection: 2
    0x05 0x0b
    Node 0x10 [Vendor Defined Widget] wcaps 0xf00000: Mono
    Node 0x11 [Vendor Defined Widget] wcaps 0xf00000: Mono
    Node 0x12 [Vendor Defined Widget] wcaps 0xf00000: Mono
    Node 0x13 [Vendor Defined Widget] wcaps 0xf00000: Mono
    Node 0x14 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
    Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
    Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]
    Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
    Amp-Out vals: [0x00 0x00]
    Pincap 0x083e: IN OUT HP Detect
    Pin Default 0x01014410: [Jack] Line Out at Ext Rear
    Conn = 1/8, Color = Green
    Pin-ctls: 0x40: OUT
    Connection: 5
    0x0c* 0x0d 0x0e 0x0f 0x26
    Node 0x15 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
    Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
    Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]
    Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
    Amp-Out vals: [0x00 0x00]
    Pincap 0x083e: IN OUT HP Detect
    Pin Default 0x01011412: [Jack] Line Out at Ext Rear
    Conn = 1/8, Color = Black
    Pin-ctls: 0x40: OUT
    Connection: 5
    0x0c 0x0d* 0x0e 0x0f 0x26
    Node 0x16 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
    Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
    Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]
    Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
    Amp-Out vals: [0x00 0x00]
    Pincap 0x083e: IN OUT HP Detect
    Pin Default 0x01016411: [Jack] Line Out at Ext Rear
    Conn = 1/8, Color = Orange
    Pin-ctls: 0x40: OUT
    Connection: 5
    0x0c 0x0d 0x0e* 0x0f 0x26
    Node 0x17 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
    Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
    Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]
    Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
    Amp-Out vals: [0x00 0x00]
    Pincap 0x083e: IN OUT HP Detect
    Pin Default 0x01012414: [Jack] Line Out at Ext Rear
    Conn = 1/8, Color = Grey
    Pin-ctls: 0x40: OUT
    Connection: 5
    0x0c 0x0d 0x0e 0x0f* 0x26
    Node 0x18 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
    Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
    Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]
    Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
    Amp-Out vals: [0x80 0x80]
    Pincap 0x08173e: IN OUT HP Detect
    Pin Default 0x01a19c40: [Jack] Mic at Ext Rear
    Conn = 1/8, Color = Pink
    Pin-ctls: 0x24: IN
    Connection: 5
    0x0c* 0x0d 0x0e 0x0f 0x26
    Node 0x19 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
    Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
    Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]
    Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
    Amp-Out vals: [0x80 0x80]
    Pincap 0x08173e: IN OUT HP Detect
    Pin Default 0x02a29c50: [Jack] Mic at Ext Front
    Conn = 1/4, Color = Pink
    Pin-ctls: 0x24: IN
    Connection: 5
    0x0c* 0x0d 0x0e 0x0f 0x26
    Node 0x1a [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
    Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
    Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]
    Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
    Amp-Out vals: [0x80 0x80]
    Pincap 0x08173e: IN OUT HP Detect
    Pin Default 0x0181344f: [Jack] Line In at Ext Rear
    Conn = 1/8, Color = Blue
    Pin-ctls: 0x20: IN
    Connection: 5
    0x0c* 0x0d 0x0e 0x0f 0x26
    Node 0x1b [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
    Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
    Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]
    Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
    Amp-Out vals: [0x00 0x00]
    Pincap 0x08173e: IN OUT HP Detect
    Pin Default 0x02224420: [Jack] HP Out at Ext Front
    Conn = 1/4, Color = Green
    Pin-ctls: 0xc0: OUT HP
    Connection: 5
    0x0c* 0x0d 0x0e 0x0f 0x26
    Node 0x1c [Pin Complex] wcaps 0x400001: Stereo
    Pincap 0x0820: IN
    Pin Default 0x593301f0: [N/A] CD at Int ATAPI
    Conn = ATAPI, Color = Unknown
    Pin-ctls: 0x00:
    Node 0x1d [Pin Complex] wcaps 0x400000: Mono
    Pincap 0x0820: IN
    Pin Default 0x4005e601: [N/A] Line Out at Ext N/A
    Conn = Optical, Color = White
    Pin-ctls: 0x00:
    Node 0x1e [Pin Complex] wcaps 0x400300: Mono Digital
    Pincap 0x0810: OUT
    Pin Default 0x01451130: [Jack] SPDIF Out at Ext Rear
    Conn = Optical, Color = Black
    Pin-ctls: 0x00:
    Connection: 1
    0x06
    Node 0x1f [Pin Complex] wcaps 0x400200: Mono Digital
    Pincap 0x0820: IN
    Pin Default 0x01c47160: [Jack] SPDIF In at Ext Rear
    Conn = RCA, Color = Yellow
    Pin-ctls: 0x00:
    Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono
    Node 0x21 [Vendor Defined Widget] wcaps 0xf00000: Mono
    Node 0x22 [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
    Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
    Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
    Amp-Out caps: N/A
    Amp-Out vals: [0x00 0x00]
    Connection: 11
    0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 0x0b
    Node 0x23 [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
    Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
    Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x80 0x80] [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
    Amp-Out caps: N/A
    Amp-Out vals: [0x00 0x00]
    Connection: 11
    0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 0x0b
    Node 0x24 [Vendor Defined Widget] wcaps 0xf00000: Mono
    Node 0x25 [Audio Output] wcaps 0x11: Stereo
    PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
    Node 0x26 [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
    Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
    Amp-In vals: [0x00 0x00] [0x00 0x00]
    Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0
    Amp-Out vals: [0x00 0x00]
    Connection: 2
    0x25 0x0b
    I have 6 ports in the back of my computer, but I'm not sure if I should select ALC883_6ports or ALC883_6ports_Digital. ALC883_3ports is selected by default.

    The package should work, right?
    Last edited by TomDaBomb2u; 01-27-2009 at 06:01 AM.


  6. #6
    Hackint0sh Moderator Array icchansan's Avatar

    Join Date
    Sep 2007
    Location
    Puerto Ordaz, Venezuela, Venezuela
    Posts
    6,641
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    349

    Default

    Did you drag the dump into the tarugas app? seems like you already have audio, check the system profile, then sound, and check the output, maybe your not using the right output
    HP Pavilion Elite m9250f
    Snow Leopard 10.6.6, Asus IPIBL-LB MOD BIOS, Intel Quad Core Q6600, 4GB RAM (800mhz), 2x500GB, nVidia 8600GT (Works), ALC888S (Works), Wireless RT73 (Works), LAN (Works) - How to Install - Blog - Hardware Combos - FAQ by TJ2K7
    Macbook Pro 13"
    iPhone 4
    Follow meh: @icchansan

    If you just want to support hackint0sh.org with a donation click here

  7. #7
    Advanced Array

    Join Date
    Jan 2009
    Location
    Detroit
    Posts
    40
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    Quote Originally Posted by icchansan View Post
    Did you drag the dump into the tarugas app? seems like you already have audio, check the system profile, then sound, and check the output, maybe your not using the right output
    Yep. That was my question. . . I edited my last post, and you replied while I was doing so. How do I tell which output I need? I did the Taruga patch thingey and it appeared to work, but still no sound.

  8. #8
    Hackint0sh Moderator Array icchansan's Avatar

    Join Date
    Sep 2007
    Location
    Puerto Ordaz, Venezuela, Venezuela
    Posts
    6,641
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    349

    Default

    put some music... and select any of the output, usually is the 1st one... if any of this work, try deleting ALCinject, APPLEHDA, HDAEnabler from the extensions... there guides for this Audio, so weird your getting this issue...
    HP Pavilion Elite m9250f
    Snow Leopard 10.6.6, Asus IPIBL-LB MOD BIOS, Intel Quad Core Q6600, 4GB RAM (800mhz), 2x500GB, nVidia 8600GT (Works), ALC888S (Works), Wireless RT73 (Works), LAN (Works) - How to Install - Blog - Hardware Combos - FAQ by TJ2K7
    Macbook Pro 13"
    iPhone 4
    Follow meh: @icchansan

    If you just want to support hackint0sh.org with a donation click here

  9. #9
    Advanced Array

    Join Date
    Jan 2009
    Location
    Detroit
    Posts
    40
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    Quote Originally Posted by icchansan View Post
    put some music... and select any of the output, usually is the 1st one... if any of this work, try deleting ALCinject, APPLEHDA, HDAEnabler from the extensions... there guides for this Audio, so weird your getting this issue...
    :-( I tried iTunes, and nothing happens when I press Play. I'm going to try to delete all the files you mentioned and reinstall the ALC883Audio.mpkg.

    I'll report right back with the results. Thanks so much for your help!

  10. #10
    Advanced Array

    Join Date
    Jan 2009
    Location
    Detroit
    Posts
    40
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    Nope. Still didn't work. I deleted ALCinject, APPLEHDA, and HDAEnabler from the extensions, then reinstalled ALC883Audio.mpkg, using the standard installation (ALC883_3ports) and patched my codec_dump.txt with AppleHDAPatcherv1.20.

    Now in System Profiler, it says
    No Built-in Audio.
    Ideas?


 

 
Page 1 of 3 123 LastLast

Similar Threads

  1. Kalyway 10.5.2 Post Installation Troubles
    By ishbar in forum Installation
    Replies: 8
    Last Post: 08-29-2010, 10:41 PM
  2. No sound post installation
    By uRabbit in forum Installation
    Replies: 0
    Last Post: 07-15-2010, 04:56 AM
  3. Post installation help?
    By NYCSavage in forum Installation
    Replies: 0
    Last Post: 03-07-2010, 02:37 PM
  4. iAtkos v2.0i post installation problem
    By malhaar in forum Installation
    Replies: 1
    Last Post: 02-23-2009, 12:46 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBulletin®
Copyright © 2014 vBulletin Solutions, Inc. All rights reserved.
Search Engine Friendly URLs by vBSEO
(c) 2006-2012 Hackint0sh.org
All times are GMT +2. The time now is 01:34 PM.
twitter, follow us!