Results 1 to 3 of 3
Discuss Aspire 5530 sound and wifi help at the Kernel / Kext (Driver) Support - Hackint0sh.org; Hi i have installed the "iDeneb_v1.4_10.5.62" version. What drivers should i use for my sound, ...
  1. #1
    Newbie Array

    Join Date
    Jun 2009
    Posts
    1
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default Aspire 5530 sound and wifi help

    Hi i have installed the "iDeneb_v1.4_10.5.62" version.

    What drivers should i use for my sound, graphics card and wifi?

    i have an Acer Aspire 5530



    Specifications:
    AMD Turion X2 Dual-core mobile RM-70
    AMD M780G Chipset
    4gb ddr2
    ATI radeon graphics - HD3200

    The link shows more specified info
    http://www.onoff.com/online/fi/brochure.nsf/vBrochures/59178/$file/59178.pdf



  2. #2
    Senior Professional Array

    Join Date
    Jun 2009
    Posts
    232
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    16

    Default There are no drivers - they are kexts

    You do not say what is going on. No one is a mind reader here and were not sitting in front of your machine.

    Usually a Kext is likely probably not loading or blocking something - or the kernel panics. That means the kernel dies the horrible crash like a aircraft pilot would it the pilot panic'ed in an emergency situation and did not know what to do.

    The kexts are vendor and device ID specific - so if the kext does not have the right vendor and model ID referenced in the kext file - it will fail - or pass up the device anyway. These are what most call "drivers". You need to find what kext goes with what device. Google the device id's for the kexts applicable. Google kexts to find out what they are.

    You have to figure this out yourself - it is YOUR machine. They are all different as to what is in the unit from the manufacturer, and even if using common device components - the vendor and device ID may be different that what the kext might have in it.

    If you have Windows still on the same machine - and it is working - you can do kext editing from inside windows by installing some helper tools to look into the HPS drive. Use Windows EditPadLite Text Editor Download and Download Ext2Fsd 0.46 - An open source Ext2 File System Driver for Windows - Softpedia and Catacombae - HFSExplorer (HFS Explorer) to see and get at the Mac files in Windows; OR you can BUY Macdrive. If you are having dual boot problems try installing EasyBCD from inside Windows to boot between the two. Its free.

    This above will only work if you have been smart enough to do a dual boot machine where Windows is on another partition or permanent drive in the same computer. If Windows will not boot use a Vista repair disk or the XP disk to repair the boot sector - then install EasyBCD through Windows and it will see the MAC partition to let you set it up on the boot manager. Google how to get one if you do not have them.

    You can see the vendor and device ID in Windows, and the kext will have a name and you can find the vendor and device ID in the text of the kext info.plist. You can edit this from the Windows side with the editor above - and use no other - they will not work.

    After you get in through safe mode, you can run "diskutils repairpermissions /" (without the quotes) and to fix the changes you made from the Windows side.

    You come in single user with the -s command at the prompt. Do what it says to mount the volume and then

    You do a "sudo -s" first (no quotes)
    cd /System/Library
    chmod -R 755 Extensions /
    touch Extensions /
    diskutil repairpermissions /

    There are other ways to do this and much more from the -s boot option (single user mode) but it is really getting UNIX specific as to the commands, and if you are there and know nothing anyway - you should probably pay someone, buy a real MAC or just give up - OR get ready for a real extensive learning curve and research on the web.

    You need to do some research on how the MAC OS works. Match your kext families with the missing parts of the OS not loading - change the vendor and device ID's and one at a time - you'll get them working and the boot errors will go away.

    If you have/had IPC 10.5.6 ppf4 or ppf5 you would likely have most of the kexts - but they might not have the right vendor ID and device ID for the unit you are trying to install on.

    It works for both CPUs Intel or AMD.

    Once installed, you need to boot in safe mode from the Darwin prompt with the -x option. Use -v also so you can see what it is loading and if it does stop in safe mode and where. Then you can try -v -f on another boot to see if it will make it all the way

    The MacOS is at it's core - UNIX - you cannot just lump a question in something and throw it here that is non-descriptive as to tell anyone not at your PC what is TRULY going on, even though I am a UNIX engineer.

    No one can help you if they cannot tell what is really going on - and if you are not ready to learn some UNIX - give up now.

    If you install the right kexts (Kernel EXTensionS) with the right vendor id's applicable the system will load them as it finds the hardware during the boot process.

    Read the clues of the boot process yourself and do some research as to what they mean and then if you have a specific question you cannot find on the Internet or in the forums - that someone can identify - post that.

    Of course you can always BUY a real MAC, and then holler "please help me" all you want to Apple Computer Support, and at some point they will tell you the same thing.

    If you install the right kexts (Kernel EXTensionS) with the right vendor id's applicable the system will load them as it finds the hardware during the boot process.

    Read the clues of the boot process yourself and do some research as to what they mean and then if you have a specific question you cannot find on the Internet or in the forums - that
    someone can identify - post that.

  3. #3
    Hackint0sh Moderator Array icchansan's Avatar

    Join Date
    Sep 2007
    Location
    Puerto Ordaz, Venezuela, Venezuela
    Posts
    6,641
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    349

    Default

    Whats the wifi and audio chipset?
    HP Pavilion Elite m9250f
    Snow Leopard 10.6.6, Asus IPIBL-LB MOD BIOS, Intel Quad Core Q6600, 4GB RAM (800mhz), 2x500GB, nVidia 8600GT (Works), ALC888S (Works), Wireless RT73 (Works), LAN (Works) - How to Install - Blog - Hardware Combos - FAQ by TJ2K7
    Macbook Pro 13"
    iPhone 4
    Follow meh: @icchansan

    If you just want to support hackint0sh.org with a donation click here

 

 

Similar Threads

  1. Req. Aspire 4740G Sound driver
    By bee_bkk in forum Kernel / Kext (Driver) Support
    Replies: 0
    Last Post: 05-30-2010, 03:27 PM
  2. Acer Aspire Revo 3610 Crackly Sound??
    By That Guy in forum Kernel / Kext (Driver) Support
    Replies: 0
    Last Post: 05-29-2010, 01:13 AM
  3. Acer aspire Usb - Wifi??
    By solidkundi in forum Using Snow Leopard
    Replies: 1
    Last Post: 01-26-2010, 07:31 AM
  4. Aspire One D250 WiFi.
    By Jamesyboy in forum Installation
    Replies: 0
    Last Post: 01-22-2010, 09:56 AM
  5. Sound on acer aspire 6920G
    By manox99 in forum Kernel / Kext (Driver) Support
    Replies: 5
    Last Post: 01-28-2009, 12:00 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBulletin®
Copyright © 2014 vBulletin Solutions, Inc. All rights reserved.
Search Engine Friendly URLs by vBSEO
(c) 2006-2012 Hackint0sh.org
All times are GMT +2. The time now is 05:06 PM.
twitter, follow us!