Discuss iPhone 3G - Firmware 3.1 Problem - Help Needed at the iPhone OS 3.x - Hackint0sh.org; Greetings Guys,
I have a problem with my iPhone! the problem is I upgraded the ...
-
iPhone 3G - Firmware 3.1 Problem - Help Needed
Greetings Guys,
I have a problem with my iPhone! the problem is I upgraded the iPhone 3G to 3.1 Firmware jailbreaked with pwnage tool on mac!
then Went to Cydia and downloaded the UltraSn0w to unlock it! the problem is there is A SLOWNESS in the device, at first i didn't know why! but when i went to settings, I see the Carrier Tab shows, then it hides after few seconds! and it show again and hides after few seconds ... and so on! I checked for the Modem Firmware it is 02.28.00! I searched for the internet for this firmware, it shows that the modem firmware is for 2.2.1 iPhone Firmware!
Any Ideas how to fix this problem? should i downgrade the OS firmware back to 2.2.1 or to 3.0 or what?
Your help all would be appreciated!! 
Thanks all for your time to read and reply for this thread
-
-
Supporter Array
First of all, you need to restore your iphone with an official 3.0 firmware, you do not need pwnagetool to do it. It will upgrade your modem firmware to 4.26.08 version. After that, you must generate a custom IPSW with pwnagetool for the 3.1 version. Then restore your iphone with the custom IPSW generated with pwnagetool.
Your iphone is not working just because you are on the 2.28.00 modem firmware. That version only works with 2.2 or 2.2.1 IPSW. For the 3.0 version, you need the 4.26.08, the version that works with UltraSn0w.
Last edited by pconde; 10-06-2009 at 01:20 PM.
-
-

Originally Posted by
pconde
First of all, you need to restore your iphone with an official 3.0 firmware, you do not need pwnagetool to do it. It will upgrade your modem firmware to 4.26.08 version. After that, you must generate a custom IPSW with pwnagetool for the 3.1 version. Then restore your iphone with the custom IPSW generated with pwnagetool.
Your iphone is not working just because you aro on the 2.28.00 modem firmware. That version only works with 2.2 or 2.2.1 IPSW. For the 3.0 versión, you need the 4.26.08, the version that works with UltraSn0w.
First, Thank you for your response!
Secondly, i will try it tonight! and i will write the result down here to tell what will happen!
Hala Madrid!
-
Supporter Array

Originally Posted by
khalid00
First, Thank you for your response!
Secondly, i will try it tonight! and i will write the result down here to tell what will happen!
Hala Madrid!

Very important: Do no restore an official 3.1 IPSW, it will upgrade your modem firmware to 5.x.x version, and UltraSn0w won't work.
You must generate it with PwnageTool.
And ofcourse, ˇAla Madrid!
-
-

Originally Posted by
pconde
Very important: Do no restore an official 3.1 IPSW, it will upgrade your modem firmware to 5.x.x version, and UltraSn0w won't work.
You must generate it with PwnageTool.
And ofcourse, ˇAla Madrid!
I tried to upgrade the iPhone to 3.0 official, but the iTunes keep saying "the firmware is not compatible"!! I down graded the iTunes from 9 to 8.2.1, it says the same thing! i was soo pissed!! i didn't know what to do next!
Suddenly, I found an 3.0 OS pwnd with PwnageTool on my machine! I said to myself "what the hell, lets try it!".. I tried it, IT WORKED!
it updated my Modem Firmware and everything went smoothly.
now, you think is it worth it to upgrade to 3.1?!
and Of course, Barcelona will eat Real Madrid alive!
-
Super Moderator
Array
There are some 3.1 only apps in the appstore now. The 3.1 release really did not add too many other non iTunes features.
If you rely on tethering then you should stay with 3.0 as Apple has blocked the ability to hack this on.
-
-

Originally Posted by
Olethros
There are some 3.1 only apps in the appstore now. The 3.1 release really did not add too many other non iTunes features.
If you rely on tethering then you should stay with 3.0 as Apple has blocked the ability to hack this on.
Thanks Olethros!
-
Like an electric shock
[QUOTE=khalid00;454577]I tried to upgrade the iPhone to 3.0 official, but the iTunes keep saying "the firmware is not compatible"!! I down graded the iTunes from 9 to 8.2.1, it says the same thing! i was soo pissed!! i didn't know what to do next!
Suddenly, I found an 3.0 OS pwnd with PwnageTool on my machine! I said to myself "what the hell, lets try it!".. I tried it, IT WORKED!
it updated my Modem Firmware and everything went smoothly.
----------------
Khalid - please download a copy of your pwnd 3.0 OS to me at idisk.mac.com/lmeier1962-public. I want to test your solution on my phone. If it works, you'll be famous, your solution would be like an electric shock throughout the iPhone community.
-
Similar Threads
-
By Reznicek in forum iPhone OS 3.x
Replies: 8
Last Post: 07-09-2010, 11:26 PM
-
By zeeshansohail in forum Yellowsn0w (3G unlock)
Replies: 22
Last Post: 06-22-2009, 05:39 AM
-
By sedjav in forum iPhone "2G" (Rev. 1)
Replies: 18
Last Post: 01-08-2008, 04:56 AM
-
By 997TT in forum General
Replies: 6
Last Post: 11-09-2007, 02:41 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks