hi
i have unlock my 1.1.1 iphone with this guide but now the iphone is very slow and i can't do anything. if i try to make a call the phone freeze.
can someone help me? please

hey my guys ...

I'm little bit confused. The i phone i bought is v1.1.1 but i downgrade it to v1.0.2 and i activated and jailbreak it but i can't make phone calls and i did all these steps from this guide :
http://www.hackint0sh.org/forum/showthread.php?t=11038
but i had problem starting Putty.

so can i upgrade my iphone and start on this guide ??

i tried everything, but i't still crashes..

Originally Posted by Vipin

hey my guys ...

I'm little bit confused. The i phone i bought is v1.1.1 but i downgrade it to v1.0.2 and i activated and jailbreak it but i can't make phone calls and i did all these steps from this guide :
http://www.hackint0sh.org/forum/showthread.php?t=11038
but i had problem starting Putty.

so can i upgrade my iphone and start on this guide ??

do not use this guide or u will brick your phone

Originally Posted by TPRTPR

i tried everything, but i't still crashes..

hmm im not sure...try a different PC

Originally Posted by vomer

Use this ONLY if you have a BRAND NEW iPhone Firmware 1.1.1 NOTHING ELSE!

Text in red means you use WinSCP for that step, text in blue means you use Putty

I have made one zip file containing all the downloads that this guide tells you to get, so instead of individual links here is a zip archive of all the files/installers needed for this guide : http://d.turboupload.com/d/2098918/unlock111.zip.html
---------------------------

First we need to get to safari:

1. Slide to reach the emergency dial screen

2. enter *#307# and then press call

3. Your phone will ring itself, press answer

4. Press hold now and your phone will start ringing again

5. Press Dismiss and your phone will go into the contacts/dial screen

6. Press contacts from the bottom bar and add a contact (Give it any name and a random URL, www.google.com is a good choice)

7. Now save your contact and then click on the URL, safari will open and say it cannot load the site. press ok

8. This is the crucial part Now press the home button and be ready to really quicky select your wifi network. As soon as you press the home button a small box will come up asking for a network. Choose your network (has to be open network) and if you did it right you will see a wifi signal on top of the iphone.

8a. Leave your phone like that now for a minute or two. Then shut down your iphone and restart.

8b. After the iPhone restarts it should have the Wifi icon showing at the top...if it does not do steps 1 - 8 again. (This is normal, took me 5 tries to get the Wifi)

9. Once the wifi is working, do steps 1 - 5 again.

9a. For the next step add another contact give it another name and this time add the address as >> http://jailbreak.toc2rta.com/

10. Save the contact and then go to the 2nd url you just saved. Safari will load the page and then close automatically to the home screen (the screen that says activate iphone).


------------------

Alternate way to choose wifi step above: (RECOMMENDED)

Kudos to idutch for the tip!!

1. Slide to reach the emergency dial screen

2. enter *#307# and then press call

3. Your phone will ring itself, press answer

4. Press hold now and your phone will start ringing again

5. Press Dismiss and your phone will go into the contacts/dial screen

6. Press contacts from the bottom bar and add a contact

7. Add a contact with a random name and homepage as >> prefs://1F

8. Save it and click on the contact's homepage. this will take you straight into the setting menu of the iPhone, and you can take all the time to select a WIFI network!

---------------------------------------



Once thats done continue :

- Get TouchFree (it works on iPhone too) http://www.slovix.com/touchfree/touchfree-setup.exe (Get/Install .Net Framework 3.0 before you move on)

- Follow the steps on TouchFree (You have to shut down the iPhone 2 times during this process, it will tell you to do it even after the 2nd time you have done it but ignore that and close the program!)
- After touchfree finishes you should restart your iphone and get to the springboard
- Set auto-lock on your phone as "never" (on your iphone: Settings > General > Auto-Lock > Never)
- Now get WinSCP (http://winscp.net/download/winscp404setup.exe)

You can find your iphone ip by going to (on your iphone) settings > Wi-Fi > "Your selected WiFi" > Look under IP Address
- Connect to your iPhone using WinSCP (user: root password: alpine)



Just press login after your screen on WinScp is like this ^

- Get AnySIM 1.1 (http://conceitedsoftware.com/iphone/anySIM-1.1.zip)
- Upload AnySIM 1.1 to the /Applications folder (Make sure both the folder anySim.app and the file inside that folder named anysim are chomodded to 0755)

The applications folder is found in here :



Make sure the directory anySim.app and the FILE named "anysim" inside the directory are chmodded to 0755!!

- Download this file http://rapid$hare.com/files/63229501/killall.html (change the $ sign for an S in the url)
- Upload it to your /usr/bin folder (on the iphone)
- Set permissions to 0655 (if you get problems later, try setting them to 0755)
- Run Installer from your springboard
- Install BSD Subsystem from Installer
- Restart your phone
- Run anySIM 1.1 (MAKE sure your new simcard in inserted) (IF ANYSIM CRASHES, CHMOD the ANYSIM FILES AS STATED ABOVE)
- Restart your phone again
- Get this file: http://rapid$hare.com/files/63231299...ownds.zip.html (change the $ sign for an S in the url)
- Upload the three files to your /usr/libexec folder on your iphone
- Set permissions to 0755 to the three files
- Rename the file called lockdownd on your /usr/libexec folder to lockdownd.back
- Rename the file lockdownd.1.0.2 to lockdownd
- Download iAsign (http://dl.free.fr/dZt8908BH/IASign_win32.zip)

you may need this dlls to run iAsign http://rapid$hare.com/files/63351413/iasign-dlls.zip.html (change the $ sign for an S in the url)

- There is a file called iphoneactivation.pem under the /iAsign/bin/ folder of the zip you just downloaded
- Uploaded to your iphone, to the folder /System/Library/Lockdown
- Get Putty from here http://the.earth.li/~sgtatham/putty/.../x86/putty.exe
- Connect to your iPhone using putty (user: root password: alpine)
- Run this command without the quotes "killall lockdownd"
- Extract the iasign folder to your C:/ Drive (That folder can be found in this file >> http://d.turboupload.com/d/2098918/unlock111.zip.html)
- Open a command line in your pc (Start menu > Run > cmd)
- Navigate to the folder where you have iasign.exe (This means you need to point the command prompt to the iasign folder):



- Now run this command from the command line "iasign --automatic iPhoneActivation_private.pem"
- Your iphone should popup a message telling you that it is Activated
- Now rename lockdownd to lockdownd.1.0.2 using WinSCP (This is in /usr/libexec)
- Now rename lockdownd.swap to lockdownd using WinSCP (This is in /usr/libexec)
- Run this command without the quotes "killall lockdownd" on putty
- Restart your phone
- And it should be unlocked by now
- Now use this tutorial to get YouTube activated: http://www.hackint0sh.org/forum/show...02&postcount=1
- You are all set now

Special thanks goes to mando for the original tutorial!

Vomer excellent guide a big thank you, my only question is after this is done. If we install apptap(if it does work) how do we clean up the changes the safari exploit made and touchfree and install openssh,subsystem, etc... through apptap the proper way, since we can then turn ssh and other services on and off with uictl ? Any ideas, i remember seeing something before about getting rid of beardrop and something else that touchfree creates... ?

ok thanks man ...

so what i can do now ... i can upgrade it to 1.1.1 as it was and then start with this guid ?

Originally Posted by vomer

hmm not too sure about this, uninstall touch free, remove all directories in program files related to touch free and then do a fresh install.


not too sure about your error...

hi again.. i have uninstall touch free, restore the iphone, restart the pc , reinstal framework 3 and start the guide again from the beggining and i have the same problem..

touchfree keeps reapeting "reading ipod flash image" and the "please wait", is always there, and it dont pass step 2...

can anyone help me with this?

thanks

when i press *#307# i dont see answer key only cancel and call and its ringing
any ideas

Hello,

i have one question: I want to use a turbosim instead of anysim. Can I use this guide for jailbreak and activate the iphone only or is the unlock with anysim an essential part of this guide? What happens if I dont do the steps which are for the anysim unlock?

thanx,
Miicki

[QUOTE=vomer;89435]Use this ONLY if you have a BRAND NEW iPhone Firmware 1.1.1 NOTHING ELSE!


- Upload AnySIM 1.1 to the /Applications folder (Make sure both the folder anySim.app and the file inside that folder named anysim are chomodded to 0755)


I got to here...I tried doing a search but couldn't find it...how do i "chomod"? Thanks!
nevermind, i got it. thanks!