Page 1 of 13 1234567891011 ... LastLast
Results 1 to 10 of 128
Discuss [TUTORIAL] 1.1.3 IPSF Remixed by GeoHot - For 3.9BL ONLY at the iPhone "2G" (Rev. 1) - Hackint0sh.org; This will only work with iphone with bootloader 3.9 - to check your bootloader if ...
  1. #1
    Amazingly Knowledgeable Array bezman's Avatar

    Join Date
    Aug 2007
    Location
    Trinidad
    Posts
    796
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    54

    Default [TUTORIAL] 1.1.3 IPSF Remixed by GeoHot - For 3.9BL ONLY

    This will only work with iphone with bootloader 3.9 - to check your bootloader if you are not sure install Baseband Info from installer by adding www.trejan.com/irepo to installer sources

    You should know or check your baseband, i have made a very comprehensive post about what your baseband and bootloader is and how to check them, please do that now if you have not already.

    This Tutorial is my experience and was taken from this thread and was originally posted and much thanks to SoLoR and others that have helped put it together. Make sure your iphone is charged and docked and autolock set to never, If you are on 1.1.3 you will need to install the fixes for mobile terminal from www.trejan.com/irepo sources in installer, I did this on my Mac running Leopard with iTunes 7.6

    having now done this with the iClarified Baseband Upgrader from on a 1.1.2(04.02.13_G) Soft-Updated to 1.1.3 and it was a breeeze. If you already have a 3.9 Bootloader Jailbreaked 1.1.3 with matching modem firmware (04.03.13_G) you can do the following from step 2), please read the tutorial a few times before doing it, and understand the stpes involved, please read this sticky thread to find out more about how the IPSF geohot_ unlock works etc...

    ok here we go.

    download this file to your computer
    http://r4p1dsh4r3.com/files/89481193...ONLY_-try5.rar

    you will need to install the following on your iphone

    BSD Subsystem
    Term-vt100
    OpenSSH


    ***** THIS IS FOR 3.9 BOOTLOADER ONLY - Jailbreaked on 1.1.2 baseband (04.0213_G) - and Dev/Nate 1.1.3 Soft-Updated *****

    1) Run Iclarified Baseband Upgrader by adding installer.iClarified.com to your Installer sources on your iPhone
    a) when baseband upgrader is done, reboot - you should have 1.1.3 firmware and 04.03.13_G modem firmware (baseband)
    2) Download the ipsf install pack from here if you have not already to your PC/Mac
    3) Extract the ipsftool-1.1.3-3.9_ONLY_-try5.rar file to your desktop - it should be a folder called ipsftool
    4) Install BSDSubsystem, OpenSSH and Term-vt100 on your iphone.
    a) you will need to add www.trejan.com/irepo to your sources in installer (if you are on jailbreked 1.1.3 with 04.03.13_G firmware/baseband/modem firmware) and install the "SUID Lib Fix" , "Term-vt100 SUID Fix" and "BSDSubSystem 2.0 Term Fix" fix for 1.1.3 for term-vt100 to work properly - this is very important - the Termvt-100 password will be alpine - make sure you type everything carefully and slowly - if you make a mistake, exit Term-vt100 and re-open it and start over)
    5) Now log in with WinSCP or FUGU into your iphone (use your iphone ip address and username: root - password: alpine)
    6) Create a folder called "ipsf" in /usr/bin
    7) Copy all the files from ipsf tool on your desktop to /usr/bin/ipsf
    8) Give ALL the files in the "ipsf" folder 0777 permissions (either in winscp/fugu or terminal)

    This is a very important step, most if not all errors of this process will occur if you don't have the right permissions - In WinSCp or Fugu right click the files and give them the right permissions, from terminal you can issue the following commands:

    cd /usr/bin/ipsf
    chmod 777 *

    9) Once you have copied all the files from ipsftool to /usr/bin/ipsf open Term-vt100 on your iphone and issues the following commands.

    cd /usr/bin/ipsf
    ./ipsf.sh

    It will start going through allot of code, please look out for erros and if you have any please search or post them for help.. but once successful, it should go through in about 5-7 mins and reboot after.

    10) You should now have 1.1.3 totally unlocked - If your signal is giving trouble, run the Signal.app that should be on your springboard on your iphone. If after running signal.app you have no sound, simply play a song or ringtone to fix. Signal.app is set up to run on every reboot to get you signal, this is because the lockdown for 1.1.3 haes not been fixed to work with the IPSF unlock yet. and will hopefully be fixed soon

    11) **** VERY IMPORTANT **** copy the entire "ipsf" dir from iphone somewhere "safe" (aka computer, usb key....), you SHOULD have copy of at file seczone pretty much as long as you will have that iphone

    12) you can now sync as usuall and use your iphone, hope this helped and please post any problems, and we will try to fix.

    -------------------------------------------------------------------------------------------------------------------------------------------------

    Here is another LONG version of this tutorial
    - This one you wipe the phone clean and update the firmware/baseband in itunes, soft-update & jailbreak 1.1.3


    Mods/SoLar please add/correct anything here, i will try to keep the thread as uptodate as possible..
    Last edited by bezman; 02-07-2008 at 04:01 AM.



  2. #2
    Senior Professional Array

    Join Date
    Oct 2007
    Posts
    412
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    28

    Default

    great job man will do this tonight

  3. #3
    Senior Professional Array

    Join Date
    Oct 2007
    Posts
    155
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    14

    Default

    really appreciate it thankyou, my phone works great. I didn't upgrade to 1.1.3 through itunes i did the orginal nates true jailbreak method and never touched it since. Doing this update was simply the best unlocking procedure ive ever done and the fastest i now have an iphone with a 04.03.13_G baseband with correct imei and everything. Simply great and thankyou to everyone involved it kicks Anysim's ass lol

  4. #4
    Senior Professional Array

    Join Date
    Dec 2007
    Posts
    352
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    30

    Default

    just quick note... use hxxp://rap|d$hare.com/files/89481193/ipsftool-1.1.3-3.9_ONLY_-try5.rar its probably latest version that will be ever compiled by me, since improving ssh method more seems "useless" also this version copys and not moves signal.app so it should work for sure pretty much automaticaly
    Last edited by SoLoR; 02-05-2008 at 11:52 PM.

  5. #5
    Senior Professional Array piranha's Avatar

    Join Date
    Aug 2007
    Posts
    241
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    27

    Default

    shouldn't:
    chmod 777*
    be:
    chmod -R 777 *
    ?

    Note the space between 777 and *
    Last edited by piranha; 02-05-2008 at 11:28 PM.


  6. #6
    Senior Professional Array

    Join Date
    Dec 2007
    Posts
    352
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    30

    Default

    Quote Originally Posted by piranha View Post
    shouldn't:

    be:
    chmod -R 777 *
    ?
    doesnt matter since inside directorys premissions are set by script

  7. #7
    Professional Array flowerpie's Avatar

    Join Date
    Dec 2007
    Posts
    52
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    9

    Default

    Erm.. I'm getting problems extracting that archive from rapid$hare. Tells me the archive is corrupt on the bbupdater-thing.

    I also tried re-downloading from another mirror. Same result.

  8. #8
    Advanced Array

    Join Date
    Aug 2007
    Posts
    38
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    Quote Originally Posted by flowerpie View Post
    Erm.. I'm getting problems extracting that archive from rapid$hare. Tells me the archive is corrupt on the bbupdater-thing.

    I also tried re-downloading from another mirror. Same result.
    Same here

  9. #9
    Professional Array flowerpie's Avatar

    Join Date
    Dec 2007
    Posts
    52
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    9

    Default

    Blah.. I'm going for AnySim crap version. Sorry guys.

  10. #10
    Senior Professional Array

    Join Date
    Dec 2007
    Posts
    352
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    30

    Default

    reuploaded hxxp://rap|d$hare.com/files/89481193/ipsftool-1.1.3-3.9_ONLY_-try5.rar


 

 
Page 1 of 13 1234567891011 ... LastLast

Similar Threads

  1. [113] Geohot IPSF error
    By Bodum in forum iPhone "2G" (Rev. 1)
    Replies: 1
    Last Post: 03-06-2008, 12:52 AM
  2. iPSF Geohot on 1.1.4
    By vomer in forum iPhone "2G" (Rev. 1)
    Replies: 3
    Last Post: 03-03-2008, 05:50 AM
  3. geohot's IPSF Server
    By fabianiphone in forum General
    Replies: 4
    Last Post: 10-24-2007, 05:32 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBulletin®
Copyright © 2014 vBulletin Solutions, Inc. All rights reserved.
Search Engine Friendly URLs by vBSEO
(c) 2006-2012 Hackint0sh.org
All times are GMT +2. The time now is 12:39 PM.
twitter, follow us!