Page 1 of 3 123 LastLast
Results 1 to 10 of 29
Discuss STEP by STEP Unlocked&Working on 1.1.2 at the iPhone "2G" (Rev. 1) - Hackint0sh.org; So this is my 1st post i hope it's important and helps a lot of ...
  1. #1
    Rookie Array

    Join Date
    Nov 2007
    Posts
    16
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Talking STEP by STEP Unlocked&Working on 1.1.2

    So this is my 1st post i hope it's important and helps a lot of people my phone was 1.1.1 04.01.13_G and i activtated and unlocked it as everyone did with Jailbreak and anySIM and i managed to upgrade and unlock it on 1.1.2 i attached 2 screenshot so people trust this and i'm also a PC user with Windows XP

    THIS IS ONLY FOR THE ONES THAT CAME FROM FACTORY WITH 1.0.2 and 1.1.1






    Windows programs / files you need:
    iBrickr - 0.91
    1.0.2,1.1.1 and 1.1.2 files from apple
    Jailbreak - 1.1.2
    anySIM - 1.2u
    WinSCP (root passwod "dottie" or "alpine")
    iTunes - 7.5
    Java Runtime Installed
    Also need
    wiNstaller
    apptapp

    1. Started with unlocked 1.1.1
    2. Install OktoPrep from Installer -> Tweaks (1.1.1)
    3. UPDATE from iTunes to 1.1.2
    4. Unpack 1.1.2-jailbreak.zip and run windows.bat (mark Install SSH and press Jailbreak!)
    5. After Jailbreak is complete you must restart your phone and after it boots up it wil self restart again (now you have and activated 1.1.2 but simlocked)
    6. Downgrade to 1.1.1 with iTunes with SHIFT + RESTORE
    7. Downgrade to 1.0.2 - 1st must go i iBrickr and select Downgrade to 1.0.2 (you must copy the originale 1.0.2 file from apple to iBrickr and renam it as it says in iBrickr after use that renamed file with iTunes to RESTORE to 1.0.2. After restore use iBrickr to Boot Up Phone.
    8. Activate 1.0.2 with iBrick
    9. Use wiNstaller by running wiNstallerGUI.exe to Install the apptapp after you install apptapp install BSD Subsystem,OPEN Ssh and anySIM.
    10. Use WINSCP to connect to your iPhone and go to /Applications/anySIM and overwrite the files from anySIM 1.2u arvhive after this run anySIM (after this you won't get any SIGNAL which is good)
    11. RESTORE to 1.1.1 thru iTunes by pressing SHIFT+RESTORE
    12. Jailbreak normal way (with *307# call) it takes some time till it self reset i restarted the phone manually once and then again jailbreak and after 7-10 mins self restarted and jailbreaked it
    13. Run installer and update it, install BSD Subsystem then install again OktoPrep from Installer -> Tweaks (1.1.1).
    14. UPDATE not restore just press UPDATE
    15. After the update it's complete you are asked to connect to iTunes then run again windows.bat from Jailbreak 1.1.2 and again after it's done manually reboot the phone and after it boots it will self boot . and TADA you have unlocked and running 1.1.2

    DO NOT RUN anySIM 1.2u directlly on 1.1.2 RUN IT ONLY UNDER 1.0.2 as I said ABOVE

    Now i got a little bug that i'm tring to fix it my MobilePhone crashes when i use the key pad and it's a matter of hours till i fix this it's something about the country code and keyboard I'm working on this

    PS: I'm just a noob got my iPhone 3 days ago and I'm sorry for my bad english but I'm from ROMANIA
    Last edited by miker; 11-19-2007 at 12:54 PM.



  2. #2
    Rookie Array

    Join Date
    Nov 2007
    Posts
    16
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    I also fixed the Keypad bug
    I took from fone and edited the file name AppSupport that you can find in /System/Library/Frameworks/AppSupport.framework/ after that i went to http://www.hiboo-mobile.com/freetool.txt to see my country code mine was RO 40 and then i used a hex editor to edit the AppSupport and replaced and existent country i replaced FR 33 with RO 40 you must put your contry there. Then i uploaded the file back to phone overwritten the existing restarted the phone and works

  3. #3
    Professional Array

    Join Date
    Oct 2007
    Location
    Kuwait
    Posts
    84
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    11

    Default

    Quote Originally Posted by miker View Post
    I also fixed the Keypad bug
    I took from fone and edited the file name AppSupport that you can find in /System/Library/Frameworks/AppSupport.framework/ after that i went to http://www.hiboo-mobile.com/freetool.txt to see my country code mine was RO 40 and then i used a hex editor to edit the AppSupport and replaced and existent country i replaced FR 33 with RO 40 you must put your contry there. Then i uploaded the file back to phone overwritten the existing restarted the phone and works
    can you help me please

    my cod country is :
    KUWAIT;KOWEدT;KW;965

    thank you

  4. #4
    Senior Professional Array

    Join Date
    Oct 2007
    Posts
    473
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    30

    Default

    Quote Originally Posted by miker View Post
    So this is my 1st post i hope it's important and helps a lot of people my phone was 1.1.1 04.01.13_G and i activtated and unlocked it as everyone did with Jailbreak and anySIM and i managed to upgrade and unlock it on 1.1.2 i attached 2 screenshot so people trust this and i'm also a PC user with Windows XP

    THIS IS ONLY FOR THE ONES THAT CAME FROM FACTORY WITH 1.0.2 and 1.1.1






    Windows programs / files you need:
    iBrickr - 0.91
    1.0.2,1.1.1 and 1.1.2 files from apple
    Jailbreak - 1.1.2
    anySIM - 1.2u
    WinSCP (root passwod "dottie" or "alpine")
    iTunes - 7.5
    Java Runtime Installed
    Also need
    wiNstaller
    apptapp

    1. Started with unlocked 1.1.1
    2. Install OktoPrep from Installer -> Tweaks (1.1.1)
    3. UPDATE from iTunes to 1.1.2
    4. Unpack 1.1.2-jailbreak.zip and run windows.bat (mark Install SSH and press Jailbreak!)
    5. After Jailbreak is complete you must restart your phone and after it boots up it wil self restart again (now you have and activated 1.1.2 but simlocked)
    6. Downgrade to 1.1.1 with iTunes with SHIFT + RESTORE
    7. Downgrade to 1.0.1 - 1st must go i iBrickr and select Downgrade to 1.0.2 (you must copy the originale 1.0.2 file from apple to iBrickr and renam it as it says in iBrickr after use that renamed file with iTunes to RESTORE to 1.0.2. After restore use iBrickr to Boot Up Phone.
    8. Activate 1.0.2 with iBrick
    9. Use wiNstaller by running wiNstallerGUI.exe to Install the apptapp after you install apptapp install BSD Subsystem,OPEN Ssh and anySIM.
    10. Use WINSCP to connect to your iPhone and go to /Applications/anySIM and overwrite the files from anySIM 1.2u arvhive after this run anySIM (after this you won't get any SIGNAL which is good)
    11. RESTORE to 1.1.1 thru iTunes by pressing SHIFT+RESTORE
    12. Jailbreak normal way (with *307# call) it takes some time till it self reset i restarted the phone manually once and then again jailbreak and after 7-10 mins self restarted and jailbreaked it
    13. Run installer and update it, install BSD Subsystem then install again OktoPrep from Installer -> Tweaks (1.1.1).
    14. UPDATE not restore just press UPDATE
    15. After the update it's complete you are asked to connect to iTunes then run again windows.bat from Jailbreak 1.1.2 and again after it's done manually reboot the phone and after it boots it will self boot . and TADA you have unlocked and running 1.1.2

    DO NOT RUN anySIM 1.2u directlly on 1.1.2 RUN IT ONLY UNDER 1.0.2 as I said ABOVE

    Now i got a little bug that i'm tring to fix it my MobilePhone crashes when i use the key pad and it's a matter of hours till i fix this it's something about the country code and keyboard I'm working on this

    PS: I'm just a noob got my iPhone 3 days ago and I'm sorry for my bad english but I'm from ROMANIA
    Looks very good however I believe you can go straight from 1.0.2 to 1.1.2 no need to go back to 1.1.1

  5. #5
    kiwi
    Guest

    Default

    ffs stop putting those thread titles when you don't actually unlock an OTB 1.1.2 iphone!


  6. #6
    Senior Professional Array

    Join Date
    Sep 2007
    Location
    Dallas, TX
    Posts
    183
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    16

    Default

    bravo man!

    how's the signal in romania on orange?
    how bout edge speed?

  7. #7
    Rookie Array

    Join Date
    Nov 2007
    Posts
    16
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    @kultschar - because you can't jailbreak 1.1.2 if you don't have OktoPrep installed on 1.1.1 before
    @kiwi i'm that noob that i don't even know what's OTN but i presume it's about the came out iPhones with 1.1.2 and i wrote up ther in capital letters:
    "THIS IS ONLY FOR THE ONES THAT CAME FROM FACTORY WITH 1.0.2 and 1.1.1"
    @bogdi1988 merci man, the signal is very strong but haven't tested yet the EGDE but i presume it works fine if you have signal problems on anyversion just run the installer and install Utilities->JohnTool it works good i had to use it on 1.1.1 when using Cosmote

  8. #8
    Advanced Array

    Join Date
    Sep 2007
    Posts
    45
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    "7. Downgrade to 1.0.1 - 1st must go i iBrickr and select Downgrade to 1.0.2 (you must copy the originale 1.0.2 file from apple to iBrickr and renam it as it says in iBrickr after use that renamed file with iTunes to RESTORE to 1.0.2. After restore use iBrickr to Boot Up Phone."


    Do you mean Downgrade to 1.0.2? NOT to 1.0.1?

  9. #9
    Rookie Array

    Join Date
    Nov 2007
    Posts
    16
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    YES that's i ment to say i misstyped it and fixed it now THANK YOU

  10. #10
    Newbie Array

    Join Date
    Nov 2007
    Posts
    2
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    Quote Originally Posted by miker View Post
    So this is my 1st post i hope it's important and helps a lot of people my phone was 1.1.1 04.01.13_G and i activtated and unlocked it as everyone did with Jailbreak and anySIM and i managed to upgrade and unlock it on 1.1.2 i attached 2 screenshot so people trust this and i'm also a PC user with Windows XP

    THIS IS ONLY FOR THE ONES THAT CAME FROM FACTORY WITH 1.0.2 and 1.1.1






    Windows programs / files you need:
    iBrickr - 0.91
    1.0.2,1.1.1 and 1.1.2 files from apple
    Jailbreak - 1.1.2
    anySIM - 1.2u
    WinSCP (root passwod "dottie" or "alpine")
    iTunes - 7.5
    Java Runtime Installed
    Also need
    wiNstaller
    apptapp

    1. Started with unlocked 1.1.1
    2. Install OktoPrep from Installer -> Tweaks (1.1.1)
    3. UPDATE from iTunes to 1.1.2
    4. Unpack 1.1.2-jailbreak.zip and run windows.bat (mark Install SSH and press Jailbreak!)
    5. After Jailbreak is complete you must restart your phone and after it boots up it wil self restart again (now you have and activated 1.1.2 but simlocked)
    6. Downgrade to 1.1.1 with iTunes with SHIFT + RESTORE
    7. Downgrade to 1.0.2 - 1st must go i iBrickr and select Downgrade to 1.0.2 (you must copy the originale 1.0.2 file from apple to iBrickr and renam it as it says in iBrickr after use that renamed file with iTunes to RESTORE to 1.0.2. After restore use iBrickr to Boot Up Phone.
    8. Activate 1.0.2 with iBrick
    9. Use wiNstaller by running wiNstallerGUI.exe to Install the apptapp after you install apptapp install BSD Subsystem,OPEN Ssh and anySIM.
    10. Use WINSCP to connect to your iPhone and go to /Applications/anySIM and overwrite the files from anySIM 1.2u arvhive after this run anySIM (after this you won't get any SIGNAL which is good)
    11. RESTORE to 1.1.1 thru iTunes by pressing SHIFT+RESTORE
    12. Jailbreak normal way (with *307# call) it takes some time till it self reset i restarted the phone manually once and then again jailbreak and after 7-10 mins self restarted and jailbreaked it
    13. Run installer and update it, install BSD Subsystem then install again OktoPrep from Installer -> Tweaks (1.1.1).
    14. UPDATE not restore just press UPDATE
    15. After the update it's complete you are asked to connect to iTunes then run again windows.bat from Jailbreak 1.1.2 and again after it's done manually reboot the phone and after it boots it will self boot . and TADA you have unlocked and running 1.1.2

    DO NOT RUN anySIM 1.2u directlly on 1.1.2 RUN IT ONLY UNDER 1.0.2 as I said ABOVE

    Now i got a little bug that i'm tring to fix it my MobilePhone crashes when i use the key pad and it's a matter of hours till i fix this it's something about the country code and keyboard I'm working on this

    PS: I'm just a noob got my iPhone 3 days ago and I'm sorry for my bad english but I'm from ROMANIA
    Hello,
    good morning,

    probably not a new message to all of u: I'm new and UNLUCKY ..

    i bought last week in Boston (for France ) a 1.1.1 (serie week 40) and unlocked it properly (jailbreakme / AppSnapp, AnySIM 1.1p) , then i gave it to a friend ,

    and immediately bought another one ... came to my surprise as 1.1.2 (serie week 45) (3B48b)
    Firmware 04.02.13_G
    Model MA712LL

    so now I'm stucked !

    not only I cannot even start it (normally) by pluging to iTunes on my mac, but is there a solution to unlock the sim on 1.1.2 ?

    thanks for yr replies .... and hopefully detailed procedure,
    jp


 

 
Page 1 of 3 123 LastLast

LinkBacks (?)

  1. 04-15-2009, 04:39 AM

Similar Threads

  1. Replies: 0
    Last Post: 04-30-2010, 06:10 PM
  2. Replies: 0
    Last Post: 01-06-2008, 03:37 AM
  3. update an unlocked iphone step by step
    By macflyer in forum iPhone "2G" (Rev. 1)
    Replies: 3
    Last Post: 12-04-2007, 12:19 AM
  4. IPSF working in UAE (step by step)
    By aiphone in forum Flea Market
    Replies: 3
    Last Post: 09-11-2007, 01:57 PM
  5. IPSF working in UAE (step by step)
    By aiphone in forum General
    Replies: 11
    Last Post: 09-11-2007, 08:35 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBulletin®
Copyright © 2014 vBulletin Solutions, Inc. All rights reserved.
Search Engine Friendly URLs by vBSEO
(c) 2006-2012 Hackint0sh.org
All times are GMT +2. The time now is 02:42 AM.
twitter, follow us!