Page 16 of 20 FirstFirst ... 67891011121314151617181920 LastLast
Results 151 to 160 of 198
Discuss [Solution] No baseband / Invalid calibration data in device tree / major 2, minor 0 at the iPhone "2G" (Rev. 1) - Hackint0sh.org; Originally Posted by gsm-box I have Getting stuck on "waiting for data..." too for 114 ...
  1. #151
    Rookie Array

    Join Date
    Sep 2007
    Posts
    22
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default any solution????

    Quote Originally Posted by gsm-box View Post
    I have Getting stuck on "waiting for data..." too for 114 & BL46

    copy all files to /usr/bin/1
    cd /usr/bin/1/
    chmod +X *
    chmod 777 *
    launchctl unload -w /System/Library/LaunchDaemons/com.apple.CommCenter.plist
    killall -9 CommCenter
    ./ienew
    Resetting the Baseband...Done
    Opened: /dev/tty.baseband
    iEraser for 112OTB: tool by geohot
    Waiting for data...

    or

    ./iunew
    it halt on "Spamin AT Command" (TP is not help for this)



    any solution or idea ?
    hello dear
    i 'm stuck in same place
    my phone is 1.0.2 OTB
    i dont know how to fix my problem

    any idea ?


  2. #152
    Senior Professional Array

    Join Date
    Mar 2008
    Posts
    118
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    12

    Default

    1. restore to 1.1.4 using DFU mode. no need to jailbreak/activate/unlock because it can be done later.
    just leave it on "slide for emergency" screen.

    2. if you have 3.9 bootloader, reflash your baseband to 04.04.05_G using iliberty+.
    look for payload "reflash baseband to version 04.04.05_G (BL3.9 only)" at advanced tap.
    only check this payload and click "go for it". after that, follow the instruction given by iliberty+.

    3. if you have 4.6 bootloader, downgrade bootloader 4.6 to 3.9fb using iliberty+.
    look for payload "downgrade bootloader 4.6 to 3.9fb" at advanced tap.
    only check this payload and click "go for it". after that, follow the instruction given by iliberty+.

    4. check your baseband exist or not by using *3001#12345#*. If exist, then you are ready to jailbreak/activate/unlock your phone.

  3. #153
    Rookie Array

    Join Date
    Sep 2007
    Posts
    22
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    Quote Originally Posted by alvink83 View Post
    1. restore to 1.1.4 using DFU mode. no need to jailbreak/activate/unlock because it can be done later.
    just leave it on "slide for emergency" screen.

    2. if you have 3.9 bootloader, reflash your baseband to 04.04.05_G using iliberty+.
    look for payload "reflash baseband to version 04.04.05_G (BL3.9 only)" at advanced tap.
    only check this payload and click "go for it". after that, follow the instruction given by iliberty+.

    3. if you have 4.6 bootloader, downgrade bootloader 4.6 to 3.9fb using iliberty+.
    look for payload "downgrade bootloader 4.6 to 3.9fb" at advanced tap.
    only check this payload and click "go for it". after that, follow the instruction given by iliberty+.

    4. check your baseband exist or not by using *3001#12345#*. If exist, then you are ready to jailbreak/activate/unlock your phone.
    thx for reply
    how can i know the bootloader ?

    and i think i dont have one or it need fix
    bcz the phone appear ( repair needed )
    so

  4. #154
    Rookie Array

    Join Date
    Sep 2007
    Posts
    22
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    Quote Originally Posted by alvink83 View Post
    1. restore to 1.1.4 using DFU mode. no need to jailbreak/activate/unlock because it can be done later.
    just leave it on "slide for emergency" screen.

    2. if you have 3.9 bootloader, reflash your baseband to 04.04.05_G using iliberty+.
    look for payload "reflash baseband to version 04.04.05_G (BL3.9 only)" at advanced tap.
    only check this payload and click "go for it". after that, follow the instruction given by iliberty+.

    3. if you have 4.6 bootloader, downgrade bootloader 4.6 to 3.9fb using iliberty+.
    look for payload "downgrade bootloader 4.6 to 3.9fb" at advanced tap.
    only check this payload and click "go for it". after that, follow the instruction given by iliberty+.

    4. check your baseband exist or not by using *3001#12345#*. If exist, then you are ready to jailbreak/activate/unlock your phone.

    after i make step 2 (reflash your baseband to 04.04.05_G using iliberty+)
    i stuck in checking baseband version ...

    so i think i dont have baseband or it broken so
    how can i make it ?

  5. #155
    Senior Professional Array

    Join Date
    Mar 2008
    Posts
    118
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    12

    Default

    You can check your bl using bootneuter. Just activate and jailbreak using iLiberty+ and install BSD subsystem and bootneuter.


    Quote Originally Posted by iyass View Post
    after i make step 2 (reflash your baseband to 04.04.05_G using iliberty+)
    i stuck in checking baseband version ...

    so i think i dont have baseband or it broken so
    how can i make it ?

    It seems like your phone have bl 4.6. Try step 3 instead.
    Last edited by alvink83; 07-07-2008 at 07:28 PM.


  6. #156
    Newbie Array

    Join Date
    Jun 2008
    Posts
    4
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default where can i get the files?????

    Quote Originally Posted by Izzard View Post
    Hi folks. I've just fixed a very broken iPhone. I know of several people who have had the same problem so I'm very pleased to have got this phone 100% working again. If you have the same symptoms then this method may help.


    THE SYMPTOMS
    • iPhone appears to have no baseband.
    • iPhone shows "Repair needed" and the info button shows unknown IMEI and ICCID.
    • When you restore - even from DFU mode - the OS changes but the firmware never gets uploaded. Restores take ages and eventually timeout with an error, leaving you in Restore mode.
    • You can bash out of restore mode and boot normally using the tools available, but you still get "Repair needed", etc.
    • Settings / About shows WiFi greyed-out, all 0s for Bluetooth, and nothing for baseband info.
    • No signal (obviously)
    • No sound from keypad or ringtones.
    • When you try jailbreaking using ZiPhone or iPlus, it fails during the process. (If I recall, ZiPhone says "Hmm, what did you do...?" and then fails to unlock. It scrolls forever. With iPlus you get the red banner and text but it stalls and locks up.)
    • After you've tried ZiPhone/iPlus, your phone will not boot in normal mode. You get "AppleMRVL868x: Invalid calibration data in device tree" in the scrolling white-on-black text.
    • Eventually you might be left with "BSD root: md0, major 2, minor 0" scrolling continuously.
    • From this point you can Restore in DFU mode but it still won't restore the baseband and will take ages to time out. You can get it to boot again but you're back at square 1.



    MY PROGNOSIS

    Okay that's a fairly horrible list and not a good place to start from. This is clearly more than a simple "WiFi greyed out" issue. I'm sure you've spotted the problem with this picture: with no EDGE and no WiFi you can't get into the phone to install helpful tools on it.

    You might also have tried things like erasing the baseband in ZiPhone and found this also failed. In my opinion your phone is NOT totally bricked. It's just poorly. All your network IDs and IMEI etc are still there. But nothing can read them. In fact it's so broken that none of the tools seem able to erase the baseband so you can install it again.


    A SOLUTION(?)

    After a couple of days of research and a million different attempts at stuff, here's what worked for me. I'll give you the overview and then some details but please bear in mind that the nitty-gritty of carrying out all of these steps has been done to death elsewhere so please have a search. I'm not going to attempt to write out a step-by-step guide in minute detail because that leads to mistakes. Plus there's a good chance a lot of people reading this have worked through most of this at least once before.

    The key seems to be properly erasing your baseband and 'ienew' seemed to be what worked.


    OVERVIEW

    1) DFU mode restore to 1.1.4. It will eventually end in an error and leave you in Restore mode.
    2) Bash out and boot normally.
    3) Jailbreak and (h)activate the phone. DO NOT ATTEMPT TO UNLOCK.
    4) Send ienew and support files over USB.
    5) Run ienew in Mobile Terminal
    6) DFU Restore to 1.1.4 again.

    You should know if you were sucessful when you Restore because this time it will recognise you have no baseband and flash the 1.1.4 one. Now you have it back to factory conditions (well apart from bootloader 3.9 of course) and you'll notice the phone reads the SIM card and you get IMEI and ICCID back. If you jailbreak you'll see that WiFi, Bluetooth and sound works. And if you unlock you'll be able to use your own SIM again. Give yourself a pat on the back (and give me some credit) if it worked

    NOTES

    1) Get DFU mode by plugging into iTunes, holding Power and Home buttons down. After 7 seconds the screen will switch off. Keep holding until 10 seconds then let go of Power button but keep holding Home. After another 10/15 seconds the screen will still be off but iTunes will find an iPhone in Restore mode. You can now just go ahead and click the Restore button. (NB if you're reading this when 1.1.4 has been superseded then I suggest you get the 1.1.4 restore file and force iTunes to restore from that, since we know 1.1.4 is unlockable.)

    2) Use your favourite method to bash out of Restore mode. iBrickr might do it. I use iphone-tools or iPlus. Independence on Mac can do it. Hell, even ZiPhone 2.6 has a button to boot in Normal mode.

    3) You need to jailbreak and activate so that you get the BSD Subsystem and Mobile Terminal. I think I used iPlus. (Don't use the -U option - trying to unlock will put you back at square one).

    4) All the files you need are here: http://stuff.uselessblather.com/tools46.zip. There are various options for transferring files over USB to the iPhone. I used a Total Commander plugin which worked great:
    Get a Total Commander trial version here: http://www.ghisler.com/download.htm
    Get the T-pot plugin here: http://t-pot.googlecode.com/files/T-PoT.1.1.zip (There's at least one other such plugin but this one worked for me.)
    If you open the zip file with Total Commander it will recognise that it has a plugin and install it for you. Nice. Now you'll find your iPhone is accessible under Network Neighbourhood / T-Pot and you can make a new folder (e.g. in /usr/bin) and put the files there.
    Other ways to send files over USB include "iPhone PC Suite" for windows and iphonedisk for OS X.

    5) Mobile Terminal next. (Login password for root is alpine). Because the baseband is hosed you'll find input very slow and laggy. This gets better when you sucessfully kill CommCenter, which you need to do anyway for the erase. "launchctl unload /System/Library/LaunchDaemons/com.apple.CommCenter.plist". This just wasn't doing it for me so I rebooted and used the more persistent version: "launchctl unload -w /System/Library/LaunchDaemons/com.apple.CommCenter.plist". The -w option will kill CommCenter on the next boot. Don't worry about that because you'll be restoring soon. Now you can type properly, set the permission on ienew by changing to the folder it's in (e.g. /usr/bin/unscrew or whatever) and entering "chmod +x ienew". You should get the following:

    Code:
    # ienew
    Resetting the Baseband...Done
    Opened: /dev/tty.baseband
    iEraser for 112OTB: tool by geohot
    Waiting for data...
    Got Header: 77 0b cc
    02 00 85 00 02 00 FF FF 85 02 03 00
    SECPACK
    02 00 04 02 06 00 01 00 00 00 00 00 0B 02 03 00
    Erase
    02 00 05 08 02 00 00 00 07 08 03 00
    02 00 06 08 06 00 01 00 00 00 A0 00 AD 08 03 00
    Hopefully the main flash was erased, wait for the next step...
    #
    If so - congrats. You're nearly there. (If you happened to bother setting the permission for bbupdater and running "bbupdater -v" at this point you'd be told that it is unresponsive to pinging. Which is exactly what you want. Because it's not there. D'you see?) DON'T bother trying to install a new baseband manually with all that "bbupdater -f and -e" stuff. You don't need to. Restoring 1.1.4 in DFU mode will do that for you.

    6) DFU Restore. You know the drill.


    There we go. Hope it works for you. Sorry for errors. It's 4am and I wrote this from memory because I didn't get the sequence right straight away or right it down at the time. I'll certainly correct this when errors in the instructions are pointed out. It's possible I've left a vital step out. This is because I've tried to whittle it down to the bare minimum number of steps so I've left out stuff I did that I believe wasn't necessary. We'll see. Good luck!
    hello there
    where can i get the needed files becouse the link you provided are not available anymore......
    i have the same problem like you described and i tryed allready a lots of methods an none work for me ....now i have an apple and i hope that with your method i will put it back together but i need the files to upload them to the iphone
    thx an have a good day

  7. #157
    Rookie Array

    Join Date
    Sep 2007
    Posts
    22
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default thx for reply

    Quote Originally Posted by alvink83 View Post
    You can check your bl using bootneuter. Just activate and jailbreak using iLiberty+ and install BSD subsystem and bootneuter.





    It seems like your phone have bl 4.6. Try step 3 instead.
    thx i did what you told me on version 1.1.4


    but bootneuter stuck on
    (please wait
    Determining current settings...)
    what can i do ?
    i stell cant see the boot loader ?
    plz help

    my phone 1.0.2 OTB
    i need to fix the bootloader and baseband

  8. #158
    Advanced Array

    Join Date
    Dec 2007
    Posts
    32
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    how do i run or get mobile terminal?

  9. #159
    Developer Array malhaar's Avatar

    Join Date
    Jan 2008
    Posts
    187
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    16

    Default

    Quote Originally Posted by flyhigh123 View Post
    how do i run or get mobile terminal?
    u can get it through iplus or iliberty..

  10. #160
    Newbie Array

    Join Date
    Nov 2007
    Posts
    7
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    As many iphone owners here, I'm having the same issues with unknown IMEI, ICCID, no BT/WIFI/Sound/Modem, Doesn't show BB/BL.. Every firmware will give me 1011.

    I have tried just about all of the posts with all the 1.1.x firmwares and even 2.0.x firmware.

    The problem:

    - I can not flash firmware 1.0.2 onto the phone. I get error (4) from itunes [not error (-4), but (4)]
    - The phone was given to me, and it's week 41. That's all I know that could indicate which BB/BL it would be and firmware. The previous owner had something swapped, so I don't even know if it has the original CommBoard so I'm going to assume the IMEI on the back will not match what should be there.

    I have tried the A17 testpoint method but got stuck at Spamming AT everytime..


    If anybody has any ideas/suggestion, they would be greatly appreciated.


 

 

Similar Threads

  1. Replies: 40
    Last Post: 07-22-2008, 11:03 AM
  2. [Solution] Fix the "Invalid Calibration Data" issue
    By JSN1 in forum iPhone "2G" (Rev. 1)
    Replies: 23
    Last Post: 07-11-2008, 02:32 AM
  3. Replies: 7
    Last Post: 07-04-2008, 03:57 PM
  4. How to fix invalid calibration data in device tree?
    By Tamer Elnady in forum General
    Replies: 0
    Last Post: 05-07-2008, 01:40 PM
  5. [iPhone problem solution] BSD root: md0, major 2, minor 0
    By gbling in forum iPhone "2G" (Rev. 1)
    Replies: 0
    Last Post: 02-29-2008, 10:52 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBulletin®
Copyright © 2014 vBulletin Solutions, Inc. All rights reserved.
Search Engine Friendly URLs by vBSEO
(c) 2006-2012 Hackint0sh.org
All times are GMT +2. The time now is 02:06 AM.
twitter, follow us!