anyone can upload the program to rs or upload the appsupport for singapore format? thanks, i cant dl from sendspace

Originally Posted by kultschar

Sorry Tim - im a complete idiot!! I was not aware I had to do this!!! Yes Mobile Phone and SMS crashing - sorry about the misunderstanding!!

I will have to go back and read again to see what I need to do

Doh! Feel stupid now!

Do not fell stupid. Your case is much more complex. The cause of the crash is the same: not having a set of number decomposing rules for callerid matching.

The cause is TOTALLY different as I explained. On all other cases, it was the absence of an entry in the mapping table. Yours is much more complex. The phone does not know where it is running!! <- the phone, not me

Originally Posted by timschuerewegen

Are you sure you created the MyCarrier.plist file and the MCCMNC symlink pointing to it?

Yes.

What I did was this;

1. Copied my ATT_US.plist from the phone to my Desktop.
2. Edit the file and replace the MCCMNC in there with mine (24204)
3. Saved the file as Tele2_NO.plist
4. Uploaded it to the same dir. as ATT_US.plist is in.
5. CD'ed to the dir. ATT_US and Tele2 is in, did "ln -s Tele2_NO.plist 24204".
6. Checked with Cyberduck that the symlink was correct - it was.
7. Changed my usual sim to the AT&T sim that followed with my phone, waited for ~30sec, changed back to my tele2 simcard.
8. Didnt work.

Originally Posted by Evoluti0n

anyone can upload the program to rs or upload the appsupport for singapore format? thanks, i cant dl from sendspace

Why can't you download?

Originally Posted by Sibelius

I've read through this thread and am totally confused. I have an unlocked 1.1.2 phone that I use in the U.S., Sweden, Denmark, Hong Kong, Taiwan. Up until now I used 1.1.1 without any major issues but with the update, sms and phone crash when I put in my non-ATT Sims. Can some kind soul explain in simple/idiot terms how I need to modify things so I can call in these places? I just don't understand what is being said here....

Thanks!

Read back starting on page 22 all the way. There are several times this is explained in detail.

Originally Posted by aviegas

The reason for RC=138 is that "fk" is not mapped in the ISO2MCC.plist nor in the MCC2ISO.plist

This whole processing starts when a "new" SIM card is recognized by the phone. It retrieves the MCC-MNC (Mobile Country Code and Mobile Network Code) from the SIM. Then it maps it to a ISO country code name, associates the carrier specific settings (EDGE, service codes, available features, etc) and sets the NetworkCountryCode.

Falklands is not there. Why? No idea. It is part of ISO 3166, so there is no reason for it not being mapped, aside from the fact that I could not find a MCC for it anywhere.

Since the Falklands is a UK Overseas Territory, maybe they use the UK MMC?

This is what needs to be cheked:

You need to run FieldTest.app, while the phone has network coverage. It's a hidden iPhone app that has detailed information about the phone workings.

There are 3 options to run it:

- Unhide it. If you know what it means, then you know how to do it.

- Open a terminal (either vt100 on the phone or SSH) and navigate to /Applications/FieldTest.app and run "FieldTest"

- Install MobileFinder (under installer). Open it, scroll the list of apps and you will find it (the icon is a "?"). Tap and off you go! This is the easiest way.

Once it opens, let it do its job and way until you see a > on the right side of the "Cell Infomation Line". Now tap this line.

There will be a few (at least one) lines like:

RX:xx RQ:xxxx ST:xx CI:xxxxx N:aaa #:bbb

The "aaa" is the MNC and the "bbb" is the MCC. Post your results and we can proceed from there.

Hi Tim

Under Cell Information I have the following:

RX:-59 FQ:14 ST:0 CI:20002 N:1 #:750

RX:-89 FQ:2 ST:0 CI:65535 N:1 #:750

RX:-94 FQ:5 ST:0 CI:20001 N:1 #:750

RX:-97 FQ:21 ST:0 CI:20004 N:1 #:750

Some of the values appear to change (RX and FQ)

Cheers

Paul

Originally Posted by staleand

Yes.

What I did was this;

1. Copied my ATT_US.plist from the phone to my Desktop.
2. Edit the file and replace the MCCMNC in there with mine (24204)
3. Saved the file as Tele2_NO.plist
4. Uploaded it to the same dir. as ATT_US.plist is in.
5. CD'ed to the dir. ATT_US and Tele2 is in, did "ln -s Tele2_NO.plist 24204".
6. Checked with Cyberduck that the symlink was correct - it was.
7. Changed my usual sim to the AT&T sim that followed with my phone, waited for ~30sec, changed back to my tele2 simcard.
8. Didnt work.

This is another situation or the same (Falklands)?

Originally Posted by kultschar

Hi Tim

Under Cell Information I have the following:

RX:-59 FQ:14 ST:0 CI:20002 N:1 #:750

RX:-89 FQ:2 ST:0 CI:65535 N:1 #:750

RX:-94 FQ:5 ST:0 CI:20001 N:1 #:750

RX:-97 FQ:21 ST:0 CI:20004 N:1 #:750

Some of the values appear to change (RX and FQ)

Cheers

Paul

750 is not mapped by the iPhone, therefore there is no way it will work.

Hold on and I will send post a fix.


I also need:

Your carrier's name
Website (if any)
EDGE information: APN, userid and password

Originally Posted by aviegas

This is another situation or the same (Falklands)?

Might be, I dont know.

For your information, FieldTest.app -> Cell information prints this on mine;

N:2 #:242

Wikipedia says its #: 242 N: 02

But as said above, the phone says #: 242 N: 2

btw; Thanks for your help!

Originally Posted by aviegas

Why can't you download?

keep giving me the max download reach when i din even dl anything from sendspace before..