Originally Posted by iphone sim free dream

Man your a KING. Thanks a lot.

Now I did all and the phone + sms work, but called ID do not. How do I modify the strings, I took out all JP thing.

I live in Sweden

+46 31 xxx xxxx International (home)
+46 70 xxxx xx x International (Mobile)
031 xxx xxxx Home land
070 xxxx xx x Mobile

and put this

se 46 00 0 1 9
se 46 00 0 2 8
se 46 00 0 3 7
se 46 00 0 4 6
se 46 00 0 5 5

is it correct, if yes, how do I re install it to the appsupport ?! do I run all the commands again from beginning??!!

From the table in http://www.kropla.com/dialcode.htm we can see that

your lines start with:

se 46 00 0

And that ok. What are the 31 and 70. Do you have area codes in Sweden?


I will assume the following:

1) ISO CC = se
2) IDD = 00
3) NDD = 0
4) Area codes: 2 digits (only 31 land and 70 cell)
5) Phone numbers with 7 digits (the way you present them does not matter)

This mean a single line:

se 46 00 0 2 7

IF THIS IS CORRECT, THEN


What you do:

- Start from scratch: with a stock version of AppSupport.

- When you edit the table, remove let's say China (cn) or Japan (jp). Remove all lines for the selected country.

- Add the Sweden line at the end

- Now, patch the file

- Replace it again

It should work now

EDIT: I've just learned that it is much more complex than that in Sweden. There are 2, 3 and 4 digits area codes. But what happen to the telefone number after that?

Do they also vary in the number of digits?

Fixed size:

se 46 00 0 2 7
se 46 00 0 3 7
se 46 00 0 4 7

or vary according to NDD prefix lenght:


se 46 00 0 2 7
se 46 00 0 3 6
se 46 00 0 4 5


I do not know. This is just supposition.

Originally Posted by aviegas

Here is a version with Tim's full patch (codes and local numbers) for Brazil.

http://**********.com/files/70558351...1.1.2.zip.html

EDIT: The ***** above is that "fast" file "sharing" site

Hey aviegas, i dont undestand your patch to recognise numbers on dialpad without NDD code.

my phone with just country table edited to brasil, works with just the local number entered without NDD.

could you explain abit more? what exactly are the situations that this occur?

cheers,

cRACKn

i wanna read my current appSupport inorder to be prepered for the 1.1.2
but when i try to read it i get :

H:\x86>dir
Volume in drive H is Users
Volume Serial Number is CA3A-4B49

Directory of H:\x86

11/19/2007 03:23 AM <DIR> .
11/19/2007 03:23 AM <DIR> ..
09/20/2007 03:38 AM 76,744 AppSupport
11/18/2007 08:08 PM 9,728 pntedit.exe
2 File(s) 86,472 bytes
2 Dir(s) 199,590,338,560 bytes free

H:\x86>pntedit.exe read AppSupport PhoneNumberTemplates.txt
AppSupport PhoneNumber Template Editor - Build 3

File "AppSupport" is not valid

Finished

H:\x86>

you are probably using appsupport version 1.1.1

yes,
cant i read it ?
i wanna see what defined there for my country.

Originally Posted by aviegas

Note that

in 91 00 - 0 10

is different from

in 91 00 0 0 10

The later allow for 1234512345 and 01234512345, while the former allows only for 1234512345

So pick carefully.

I chose that because in order to call long distance between two cellphones registered in two different telecom circles within the country, one needs to either prefix '0' before the celphone no. or prefix it with (+91). 91 is the country code.

That was the reason I added '0' instead of '-'. Does this make sense?

*

Also, does this solve the issue of receiving SMS from alphanumeric servers?

In FW 1.1.1 the text messages from alphanumeric senders were all gibberish. Most of the banks in the country send text messages from these kind of servers. Does this Appframework thingy solve this issue?

Hey guys i hope you can help me...i live in dominican republic...and what i understood is tat i may take the us code...and use it for domician republic because they are the same!
Now...how can i create a plsit for ORANGE DOMINICANA???
THX

Any help would be appreciated... Been confused with all the number worst of all I'm not that unIT person so feel like the dumbest person on earth at the moment.

Anyway live in Indonesia and trying to complete my 112 unlocked.

Got the pnedit working and extract the files. Now what?

BTW Indonesia have 5 GSM provider. 3 GSM provider used it everytime depending on the availability of the signal.

The question is how or what should I edit? Could someone show me how? Could I put all three into it?

OK.. here is Indonesian code

+62 21 xxxx xxxx for landline (Intenational)
+62 817 xxxx xxxx for XL
+62 855 xxxx xxxx for Matrix (Indosat)
+62 811 xxxx xxxx for telkomsel (Telkomsel)

Thanks in advance..

regards,

Originally Posted by KingRichard

+62 21 xxxx xxxx for landline (Intenational)
+62 817 xxxx xxxx for XL
+62 855 xxxx xxxx for Matrix (Indosat)
+62 811 xxxx xxxx for telkomsel (Telkomsel)

According to http://www.wtng.info/wtng-62-id.html (without "Pager" and "various special services") you need

For "+62 x xxxxxxxx" and "+62 xx xxxxxxx" use

id 62 001 0 1 8
id 62 001 0 2 7

For "+62 x xxxxxxxxx" and "+62 xx xxxxxxxx" and "+62 xxx xxxxxxx" use

id 62 001 0 1 9
id 62 001 0 2 8
id 62 001 0 3 7

For "+62 x xxxxxxxxxx" and "+62 xx xxxxxxxxx" and "+62 xxx xxxxxxxx" use

id 62 001 0 1 10
id 62 001 0 2 9
id 62 001 0 3 8

For "+62 xx xxxxxxxxxx" and "+62 xxx xxxxxxxxx" use

id 62 001 0 2 10
id 62 001 0 3 9

For "+62 xxxx xxxxxxxxx" use

id 62 001 0 4 9

For "+62 xxxx xxxxxxxxxx" use

id 62 001 0 4 10

The order in which you put them is very important. If you use the order in which I have posted them, everything should be ok.

Thanks Tim for the update.. Now in order for me to have it work..So I need to delete the rest of country and replace it with mine right? Cause the limit are still 32 line right?

Again thanks bro

Based on white paper I read Indonesia should have this in order. Please correct me.

id 62 001 0 1 9
id 62 001 0 2 8

id 62 001 0 1 10
id 62 001 0 2 9
id 62 001 0 3 8

id 62 001 0 2 10
id 62 001 0 3 9

id 62 001 0 3 10

id 62 001 0 4 10

Is this right.. thanks a lot Tim...