One-click Jailbreak for 1.1.1 (Windows)!

This will jailbreak your iPhone and install Installer.app. When it's finished you will have Installer on your springboard! No need to patch the springboard either--it's all done for you automatically.

I tested it and it works. No need to fumble around with SSH. No need for WiFi.

Before beginning be sure you are on a freshly restored/updated 1.1.1 iPhone. You also need to ensure that .NET framework 2.0 is installed before proceeding. If you don't have it get it from Windows Update (or proceed to the longer guide, which doesn't have this requirement).

Easy 1.1.1 Jailbreak/Installer

1.) Download the following file, and unzip it into a folder:

Code:

http://zoo.cs.yale.edu/~yw226/ipod/touchfree4.zip

2.) Place a copy of iTunesMobileDevice.dll into the above folder. If you don't have a copy grab one from here on your PC:
C:\Program Files\Common Files\Apple\Mobile Device Support\bin
Or download it from here:

Code:

http://r-a-p-i-d-s-h-a-r-e.com/files/62133418/iTunesMobileDevice.zip.html

3.) Visit

Code:

http://jailbreak.toc2rta.com

on your iPhone. (Do NOT visit that page unless you are jailbreaking!)

4.) In the folder from step 1 run touchFree.exe. Don't worry about the "touch" name, it works. Follow the on-screen instructions. Be sure you reboot twice when instructed.

That's it. When finished you will have Installer on your springboard! (Don't forget to install Community Sources in Installer to see more apps.)

Advanced Users (dropbear to OpenSSH)

Both guides install dropbear SSH. If you would like to switch from dropbear to OpenSSH, follow these instructions.


For those who used the one-click guide:

1.) Install BSD Subsystem using Installer.

2.) install UIctl from Installer.

3.) Run UIctl (be careful with this application). Tap au.asn.ucc.matt.dropbear and choose "unload -w."

4.) Install OpenSSH with Installer.

5.) Connect to your iPhone using WinSCP, username/password of root/alpine.

6.) Using WinSCP delete the following files and folders on the iPhone:
/etc/dropbear/dropbear_rsa_host_key
/etc/dropbear/dropbear_dss_host_key
/etc/dropbear (folder)
/System/Library/LaunchDaemons/au.asn.ucc.matt.dropbear.plist
/usr/bin/dropbear

7.) Restart iPhone. Verify in UIctl that au.asn.ucc.matt.dropbear is gone, if so dropbear is not loaded (which is what we want!).

8.) You may delete UIctl if desired (using Installer).


For those who used the original guide:

1.) Install the BSD Subsystem using Installer.

2.) Install OpenSSH with Installer.

3.) Copy com.apple.update.plist.orig from your sshkit folder to: /System/Library/LaunchDaemons/com.apple.update.plist

(Delete com.apple.update.plist beforehand, and make sure com.apple.update.plist.orig is named com.apple.update after copying.)

4.) Restart iPhone.

5.) Connect to your iPhone using WinSCP, username/password of root/alpine.

6.) Using WinSCP delete the following files and folders on the iPhone:
/etc/dropbear/dropbear_rsa_host_key
/etc/dropbear/dropbear_dss_host_key
/etc/dropbear (folder)
/etc/hackinit.sh
/etc/init.d/dropbear.sh
/etc/init.d (folder)
/usr/bin/dropbear

7.) Restart iPhone again.

impressive, where did u get this?

You forgot to mention, this only works for activated 1.1.1 iPhones

does this work with OTB FW 1.1.1 iPhone (not activated nor unblocked)

Originally Posted by meti

does this work with OTB FW 1.1.1 iPhone (not activated nor unblocked)

You can get to Safari without being activated. Look up "*#307#" on the forums for more information. Nice work to the author. It's almost time to update to 1.1.1!

Originally Posted by DogGunn

You can get to Safari without being activated. Look up "*#307#" on the forums for more information. Nice work to the author. It's almost time to update to 1.1.1!

I'm personally waiting for an 1.1.1 activation app as I find that the most difficult part of the entire process.

this is for ipod touch

source: http://forums.macrumors.com/showthread.php?t=367947

Originally Posted by ReVan

One-click Jailbreak for 1.1.1 (Windows)!

This will jailbreak your iPhone and install Installer.app. When it's finished you will have Installer on your springboard! No need to patch the springboard either--it's all done for you automatically.

I tested it and it works. No need to fumble around with SSH. No need for WiFi.

Before beginning be sure you are on a freshly restored/updated 1.1.1 iPhone. You also need to ensure that .NET framework 2.0 is installed before proceeding. If you don't have it get it from Windows Update (or proceed to the longer guide, which doesn't have this requirement).

Easy 1.1.1 Jailbreak/Installer

1.) Download the following file, and unzip it into a folder:

Code:

http://zoo.cs.yale.edu/~yw226/ipod/touchfree4.zip

2.) Place a copy of iTunesMobileDevice.dll into the above folder. If you don't have a copy grab one from here on your PC:
C:\Program Files\Common Files\Apple\Mobile Device Support\bin
Or download it from here:

Code:

http://r-a-p-i-d-s-h-a-r-e.com/files/62133418/iTunesMobileDevice.zip.html

3.) Visit

Code:

http://jailbreak.toc2rta.com

on your iPhone. (Do NOT visit that page unless you are jailbreaking!)

4.) In the folder from step 1 run touchFree.exe. Don't worry about the "touch" name, it works. Follow the on-screen instructions. Be sure you reboot twice when instructed.

That's it. When finished you will have Installer on your springboard! (Don't forget to install Community Sources in Installer to see more apps.)

Advanced Users (dropbear to OpenSSH)

Both guides install dropbear SSH. If you would like to switch from dropbear to OpenSSH, follow these instructions.


For those who used the one-click guide:

1.) Install BSD Subsystem using Installer.

2.) install UIctl from Installer.

3.) Run UIctl (be careful with this application). Tap au.asn.ucc.matt.dropbear and choose "unload -w."

4.) Install OpenSSH with Installer.

5.) Connect to your iPhone using WinSCP, username/password of root/alpine.

6.) Using WinSCP delete the following files and folders on the iPhone:
/etc/dropbear/dropbear_rsa_host_key
/etc/dropbear/dropbear_dss_host_key
/etc/dropbear (folder)
/System/Library/LaunchDaemons/au.asn.ucc.matt.dropbear.plist
/usr/bin/dropbear

7.) Restart iPhone. Verify in UIctl that au.asn.ucc.matt.dropbear is gone, if so dropbear is not loaded (which is what we want!).

8.) You may delete UIctl if desired (using Installer).


For those who used the original guide:

1.) Install the BSD Subsystem using Installer.

2.) Install OpenSSH with Installer.

3.) Copy com.apple.update.plist.orig from your sshkit folder to: /System/Library/LaunchDaemons/com.apple.update.plist

(Delete com.apple.update.plist beforehand, and make sure com.apple.update.plist.orig is named com.apple.update after copying.)

4.) Restart iPhone.

5.) Connect to your iPhone using WinSCP, username/password of root/alpine.

6.) Using WinSCP delete the following files and folders on the iPhone:
/etc/dropbear/dropbear_rsa_host_key
/etc/dropbear/dropbear_dss_host_key
/etc/dropbear (folder)
/etc/hackinit.sh
/etc/init.d/dropbear.sh
/etc/init.d (folder)
/usr/bin/dropbear

7.) Restart iPhone again.

damn, i read it a whole bunch of times but. do we have to do anything under "Advanced Users (dropbear to OpenSSH)" ???? or can we stop at "That's it. When finished you will have Installer on your springboard! (Don't forget to install Community Sources in Installer to see more apps.)" ????

So does or doen't this work also for iPhone?

Have you seen that iNdipendence 1.2.2 is out?

(mac users)