Iphone Wont start after iplus2.0b

Hello, I have an 1.1.2 OTB iphone that I used with a turbosim and it worked fine. I restored it to 1.1.4 using iclarified tutorials and the unlocked, jalibreaked and activated it with iplus2.0b, the patched it to work in my country.
It worked fine for 1 week but today it died. Can't turn it on or off, screen is black and itunes will not recognize it.
Tried charging, discharging, DFU, nothing works.

Please help !

leave it off and plug it in and let it boot up then restore

If you cant get it into DFU mode then the hardware must be damaged and you must have done something to damage it!

However I suspect that in reality your just not being patient enough for DFU mode.

From time to time the screen on my iPhones will just stay black - nothing will get them to respond... so I hold down sleep and home and KEEP holding till the Apple logo appears then let go and the phone just boots up normally again.

If you let go of the sleep button and have the phone connected to itunes it will go into DFU mode and you can restore.

But if neither works I suggest you think about what you have done to your phone as iPlus would not cause a hardware issue!

Originally Posted by Spinstorm

If you cant get it into DFU mode then the hardware must be damaged and you must have done something to damage it!

However I suspect that in reality your just not being patient enough for DFU mode.

From time to time the screen on my iPhones will just stay black - nothing will get them to respond... so I hold down sleep and home and KEEP holding till the Apple logo appears then let go and the phone just boots up normally again.

If you let go of the sleep button and have the phone connected to itunes it will go into DFU mode and you can restore.

But if neither works I suggest you think about what you have done to your phone as iPlus would not cause a hardware issue!

NO I kept the keys pushed for over one minute and nothing happened. I was using my phone without a problem and right after a call i tried to chek my calendar and it went black ever since...

Do you think there is a way of accesing the phone with the computer?

ssh into it, or use ibrickr if you have the zibrikr patch also you could use independce, what were the last few apps you had installed?

The problem is the phone is dead and my usb ports dont even know is there, when i plug it in teh computer does not recognize it. I tried ibrick didn't worked.
I only installed SSH, BSD subsystem, Flashlight, and terminal

Right now is dead, nothing works

if your offical and not unlocked then make absoultely sure you cant get it on at all and try and take it back because it sounds like a hardware issue

once you did a hardware shutdown
HOME + POWER BUTTON

To put it in DFD mode
HOLDING the HOME Button then PUSH the Power button until the screen lights up then release the POWER Button But keep Holding the HOME Button until Cable thing shows.

You Don't have to keep HOLDING BOTH Buttons to get into DFD mode.

a video might help so get the popcorn

http://youtube.com/watch?v=fiTcKMZfyfk

I've been getting into DFU lately with eziphone

I just hit the dfu button itunes pops up and I'm good to go