Page 1 of 2 12 LastLast
Results 1 to 10 of 13
Discuss how to unlock 1.1.3 OTB at the iPhone "2G" (Rev. 1) - Hackint0sh.org; hey guys do you know any way of unlocking a 1.1.3 OTB iphone. i have ...
  1. #1
    Senior Professional Array

    Join Date
    Feb 2008
    Posts
    117
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    12

    Exclamation how to unlock 1.1.3 OTB HELP!!!!

    hey guys do you know any way of unlocking a 1.1.3 OTB iphone. i have been looking around and i have heard many different things. somepeople say to follow this http://hackint0sh.org/forum/showthread.php?t=28612 and others say go to iclarified and find something on how to downgrade a 1.1.3 OTB, i have searched and came up with nothing, the closest thing that i found was this http://www.iclarified.com/entry/index.php?enid=630 which says on the top it is only to be used if you have UPGRADED TO 1.1.3 not if you have 1.1.3 OTB. so what should i do?
    Last edited by skyline_2k7; 02-10-2008 at 02:32 AM.



  2. #2
    Senior Professional Array

    Join Date
    Nov 2007
    Posts
    171
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    just pick a hole and fuck it.

  3. #3
    Senior Professional Array

    Join Date
    Feb 2008
    Posts
    117
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    12

    Default

    only reply if u have something to say that will help someone

  4. #4
    Rookie Array

    Join Date
    Feb 2008
    Posts
    10
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    i own 1.1.3 otb , unlocked it with that guide :
    http://www.hackint0sh.org/forum/showthread.php?p=216434,
    then i used official dev team upgrade to get back to 1.1.3 , works perfectly !

  5. #5
    Advanced Array

    Join Date
    Oct 2007
    Posts
    45
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    Here's a direct quote from the site you just linked:

    "If you have the 4.6 Bootloader then you must follow the downgrade firmware part of this tutorial and then perform the 1.1.2, 1.1.3 OTB unlock:
    http://www.iclarified.com/entry/index.php?enid=649"

    Hint: do that.


  6. #6
    Rookie Array

    Join Date
    Feb 2008
    Posts
    10
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    forgot,i downgraded with this one :
    http://www.sendowski.de/2008/01/18/a...2-inkl-unlock/

  7. #7
    Senior Professional Array

    Join Date
    Feb 2008
    Posts
    117
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    12

    Default

    so when i get my 1.1.3 OTB iphone i have to do this first, then what? becasue when im done with this i will have a 1.1.1 jailrbeaked iphone. what do i do after this?

    Step One
    Connect your iPhone to your PC and launch iTunes


    Step Two
    Press and hold Home and Power button of your iPhone at the same time. Once the screen turns black, release the power button but keep on holding the Home button until Apple logo changes to the restore screen. Note: The screen may also just stay black. This is normal. Just hold the home button till iTunes detects the iPhone.


    Step Three
    iTunes will then detect an iPhone in restore mode.


    Hold down the Shift key and click Restore.


    A dialog window will appear asking you to select the firmware to restore to. Select the 1.1.1 firmware we downloaded earlier (iPhone1,1_1.1.1_3A109a_Restore.ipsw)


    At the end of the restore you will get Error 1015. This is okay. Simply click the Ok button.


    Another popup will appear telling you your iPhone is in recovery mode. Click the Ok button.


    Step Four
    Exit iTunes by selecting Exit from the File menu. Press Control+Alt+Delete on the keyboard. Select to Start Task Manager.


    Click to select the Processes tab from the Windows Task Manager window.


    Select iTunesHelper.exe from the list of processes and then click the End Process button. A popup will appear asking you to confirm the end process. Click the End Process button from the popup.


    You can now close Windows Task Manager by click the X at the top right of the window.

    Step Five
    You will notice your iPhone is still in recovery mode. To exit recovery mode launch iBrickr.exe which you downloaded earlier.


    Click the Boot the phone link.


    iBrickr will say Please wait while iBrickr tries to fix your phone.


    The iPhone will reboot and display the Activate screen again!


    You can now close iBrickr.


    JAILBREAK 1.1.1
    Step One
    At the "Activate iPhone" screen move the slider to the right for emergency calling.


    Step Two
    Dial "*#307#" then press the Call button.


    Step Three
    You will hear the phone call itself. Use the back arrow to clear the number you just enter. Now dial "0" then press the Call button.


    Step Four
    Now you will be able to see the incoming call. Press the Accept button.


    Step Five
    Now press the Hold button to put the call on hold.


    Step Six
    The phone will call itself again. This time press the Decline button.


    Step Seven
    We now are shown the keypad again. Click the contacts tab at the bottom. We are now presented with an empty contacts menu. Click the plus(+) button to add a new contact.


    Step Eight
    Press Add New URL.


    Step Nine
    Input prefs: as the url then press the Save button.


    Step Ten
    Press Add New URL again.


    Step Eleven
    Input http://jailbreakme.com as the url then press the Save button.




    Step Twelve
    Now in the contact view you will see the 2 urls. Press the prefs: url.


    Step Thirteen
    This will bring up the iPhone's Settings Menu. Select your wireless network from the Wi-Fi category. Press the Settings button at the top left to go back to the Settings Menu.


    Step Fourteen
    Select the General category from the Settings Menu. Then select the Auto-Lock subcategory.




    Press to select Never from the list of Auto-Lock times.


    Press the Settings button at the top left to return to the settings window.

    Step Fifteen
    Press the Home button. At the "Activate iPhone" screen move the slider to the right for emergency calling.


    Step Sixteen
    Now dial "0" then press the Call button.


    Step Seventeen
    Now you will be able to see the incoming call. Press the Accept button.


    Step Eighteen
    Now press the Hold button to put the call on hold.


    Step Nineteen
    The phone will call itself again. This time press the Decline button.


    Step Twenty
    We now are presented with our contacts menu. Press to select the contact we added.


    Step Twenty One
    Press the http://jailbreakme.com url. This will open Safari and take you to jailbreakme.com


    Step Twenty Two
    Scroll down to the bottom of the page and press Install AppSnapp.




    Phone will return to activation screen, but don't panic, just wait. iPhone should automaticly restart after almost a minute. When the phone starts again, it should no longer say Slide to emergency, but rather Slide to Unlock. This means it was successfull!


    I've had a few reports of the emergency slider not changing to the unlock slider. The best suggestion so far has been to keep the iPhone connected to the computer and make sure its detected in iTunes. Otherwise it seems to work if you retry installing AppSnapp till it works. Don't know what the issue is exactly (maybe a server load issue) but if it doesn't work immediately then try again.

  8. #8
    Newbie Array

    Join Date
    Sep 2007
    Posts
    7
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    Here is the steps:

    1. Downgrade to 1.1.1
    2. Unlock using installer (1.1.2/1.1.3 OTB Unlock)
    3. Upgrade back to 1.1.2 using 1.1.2 jailbreak - happy camper
    4. Upgrade back to 1.1.3 (Dont know just yet)

  9. #9
    Senior Professional Array

    Join Date
    Feb 2008
    Posts
    117
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    12

    Default

    so i downgrade to 1.1.1 then i use the geo hot 1.1.2/ 1.1.3 OTB unlock, and then u upgrade to 1.1.2 and jailbreak it? how do i do the last part which is upgrade to 1.1.2 and jailbreak it?

  10. #10
    Senior Professional Array smirkis's Avatar

    Join Date
    Dec 2007
    Posts
    361
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    30

    Default

    dude go freakin read. upgrade/downgrade is the most basic part of being able to unlock...

    go to iclarified and read every tutorial. and i mean every freaking tutorial. it tells you how to do everything and unlock it, u don't need to be told what to do, jus go read how to do it.
    originally OTB 1.1.2 iPhone 4.6BL
    hActivated/Jailbroken/gUnlocked
    Tzones hacked
    T-Mobile USA

    now blackra1n'd 3.1.2


 

 
Page 1 of 2 12 LastLast

Similar Threads

  1. Replies: 18
    Last Post: 03-03-2008, 10:09 PM
  2. Replies: 2
    Last Post: 02-14-2008, 04:55 PM
  3. Replies: 0
    Last Post: 01-29-2008, 02:17 PM
  4. Replies: 8
    Last Post: 01-24-2008, 06:39 PM
  5. Replies: 0
    Last Post: 09-27-2007, 03:30 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBulletin®
Copyright © 2014 vBulletin Solutions, Inc. All rights reserved.
Search Engine Friendly URLs by vBSEO
(c) 2006-2012 Hackint0sh.org
All times are GMT +2. The time now is 07:25 AM.
twitter, follow us!