Results 1 to 7 of 7
Discuss how do i unlock a 16GB iphone?? at the iPhone "2G" (Rev. 1) - Hackint0sh.org; hello guys, so i was wondering if anyone knows if i can use this method ...
  1. #1
    Senior Professional Array

    Join Date
    Feb 2008
    Posts
    117
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    12

    Default how do i unlock a 16GB iphone??

    hello guys, so i was wondering if anyone knows if i can use this method to unlock my 16GB iphone,

    Quote Originally Posted by GeeZuZz View Post
    This tutorial is old and should only be used in case you have problem with the "ZiPhone" method. Click here for my ZiPhone GUI application!

    Step 1: Install 1.1.1 firmware
    If your phone is already activated on any other firmware you can skip this and the next step. But you would need to add http://i.unlock.no/ as a source in Installed manually.

    To get 1.1.1 firmware installed, you must get the phone enter recovery mode. Here's how:

    1. Connect the phone to the computer and press and hold the Power button (on top) and the Home button (on bottom front) simultaneously.
    2. After about 15 seconds phone will appear to turn off, release the Power button but keep holding the Home button.
    3. After about 15 seconds the computer and iTunes will detect the phone in recovery mode. Screen should be black (off).
    4. Download the following two files to your computer if you havent alread: 1.1.1 firmware and 1.1.2 firmware
    5. Hold down SHIFT key (Windows) or Option/ALT-key (Mac) when clicking the Restore button in iTunes, and it will let you choose firmware file. Select the 1.1.1 firmware file you downloaded in previous step.
    6. iTunes will give give a 1015 error, and you phone will get stuck in recovery mode.
    7. To get it into normal mode, run AppTapInstaller.exe (or iNdependence if your're on a Mac). If you are downgrading from 1.1.3 you might have problems getting it started in normal mode. The solution is simple, just restore your phone to 1.1.1 again, and this time it will work
    8. Now your phone should be at the activation screen.


    Step 2: Jailbreak and activate
    1. Make sure you have a SIM-card with PIN turned off (the supplied AT&T card works fine).
    2. On the activation screen, slide for emergency and dial: *#301# to make the phone call itself.
      (If the incoming call dialog quickly disappears but it keeps ringing, just dial 0 (remove *#301# first), and it will call itself)
    3. Answer the call, and tap on Hold
    4. Phone will call it self again, tap Decline. You will now be returned to the normal dialer.
    5. Tap on contacts, and tap the + icon to add a new. The only info you are going to add to this contact are two URL's. To add a URL, tap Add new URL. The first URL is prefs followed by a colon: prefs: and the second is i.unlock.no. Tap Save.
    6. Your contact now has two "web pages" - tap on the first one (prefs: ). This will take you to the settings dialog. The reason you want this, is because you need to connect to a Wi-Fi network, so tap on Wi-Fi, and get connected to a network, and make sure the icon on top of the screen is indicating that you are connected. While you are in the settings dialog, you should also set: General --> Auto-Lock --> Never.
    7. Now, press the home button, and again, slide for emergency dial 0, Answer the call, Hold and Decline the new call so that you get to the contacts. Tap on your contact (No Name), and this time tap on the other home page, i.unlock.no
    8. Safari will launch and show you a webpage. Tap on Tap here to jailbreak your iPhone
    9. Phone will return to activation screen and after a few seconds the phone should restart.
    10. If the phone does not restart after waiting a full minute, please make sure that you have your phone connected to the computer and try again.
    11. When the phone starts again, it should no longer say slide for emergency, but rather Slide to unlock It means it was successfull! Activation is now bypassed, and phone prepared for software installation! (If you are going to use an AT&T SIM, you won't need to do the next step.)



    Step 3: Performing the unlock

    Add http://i.unlock.no/ to Installer sources if you didn't follow this tutorial
    1. Tap on the Installer icon, and wait for it to refresh the sources
    2. Tap on Install at the bottom
    3. Scroll down to Unlocking Tools and install 1.1.2/1.1.3 OTB Unlock
    4. The process will take a few minutes, before you get a message that it completed successfully



    Step 4: Upgrade to 1.1.2
    Even though the phone is already unlocked, it will not get a signal. To fix this upgrade to 1.1.2:
    1. Open iTunes again and hold down the SHIFT key (Windows) or Option/ALT-key (Mac) on your keyboard while clicking on the Upgrade button (not the restore button!). A file browsing dialog should appear, and you must select the 1.1.2 firmware file you downloaded previously.
    2. While the phone is upgrading, download the 1.1.2 jailbreak archive and extract the files to your computer.
    3. If you don't already have Java on your computer, you need to download and install Java runtime first. If you are unsure, check the jailbreak.jar file in the archive you extracted previously - it should have an icon with a coffee cup
    4. When your phone is done upgrading, and shows the Slide for emergency screen, you need to launch the jailbreak java application on your computer. Windows users double click on the windows.bat file, while Mac users can double click on jailbreak.jar file.
    5. An application should appear, with a "Jailbreak" button - click on it and wait while it's jailbreaking. This will take a few minutes, and your phone will restart a few times at the end.
    6. Your phone should now show "Slide to unlock" instead of emergency. If it does, everything was successfull.



    Step 5: Finishing the unlock
    Now your phone will accept any SIM-card and you will get signal. Congratulations!

    But if you are using your phone in a forreign country, the Phone/SMS application will just crash.

    Open Installer and install iWorld found in the Tweaks 1.1.2 category. Start iWorld and select your country and it will fix the crashing problem.

    If you want to upgrade to 1.1.3, there's a package called Official 1.1.3 Upgrader located in the System category. Installing it will upgrade your phone to a jailbroken 1.1.3. Be aware that it will take some time (15-40 minutes).



    and can i also use Ziphone?



  2. #2
    Professional Array monsterr2's Avatar

    Join Date
    Dec 2007
    Posts
    59
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    9

    Default

    That is too complicated! Go to ziphone.org and download ziphone 2.4! U can unlock your iphone in 2,5 minutes with that! You can see great tutorials about this in youtube!

  3. #3
    Senior Professional Array

    Join Date
    Feb 2008
    Posts
    117
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    12

    Default

    ok but the one in quotes will also work right?

  4. #4
    Professional Array

    Join Date
    Feb 2008
    Location
    Ireland
    Posts
    52
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    9

    Default

    HI - I unlocked a 16GB 113 phone today using ZiPhone V2.4 - It took me 4 minutes and the phone works fine with my Vodafon SIM. The BL was downgraded from 4.6 to 3.9 in the process... this was an option though.

  5. #5
    Senior Professional Array

    Join Date
    Feb 2008
    Posts
    117
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    12

    Default

    can someone please tell me if this method will work on a 16 GB iphone?

    Originally Posted by GeeZuZz
    This tutorial is old and should only be used in case you have problem with the "ZiPhone" method. Click here for my ZiPhone GUI application!

    Step 1: Install 1.1.1 firmware
    If your phone is already activated on any other firmware you can skip this and the next step. But you would need to add http://i.unlock.no/ as a source in Installed manually.

    To get 1.1.1 firmware installed, you must get the phone enter recovery mode. Here's how:

    1. Connect the phone to the computer and press and hold the Power button (on top) and the Home button (on bottom front) simultaneously.
    2. After about 15 seconds phone will appear to turn off, release the Power button but keep holding the Home button.
    3. After about 15 seconds the computer and iTunes will detect the phone in recovery mode. Screen should be black (off).
    4. Download the following two files to your computer if you havent alread: 1.1.1 firmware and 1.1.2 firmware
    5. Hold down SHIFT key (Windows) or Option/ALT-key (Mac) when clicking the Restore button in iTunes, and it will let you choose firmware file. Select the 1.1.1 firmware file you downloaded in previous step.
    6. iTunes will give give a 1015 error, and you phone will get stuck in recovery mode.
    7. To get it into normal mode, run AppTapInstaller.exe (or iNdependence if your're on a Mac). If you are downgrading from 1.1.3 you might have problems getting it started in normal mode. The solution is simple, just restore your phone to 1.1.1 again, and this time it will work
    8. Now your phone should be at the activation screen.


    Step 2: Jailbreak and activate

    1. Make sure you have a SIM-card with PIN turned off (the supplied AT&T card works fine).
    2. On the activation screen, slide for emergency and dial: *#301# to make the phone call itself.
    (If the incoming call dialog quickly disappears but it keeps ringing, just dial 0 (remove *#301# first), and it will call itself)
    3. Answer the call, and tap on Hold
    4. Phone will call it self again, tap Decline. You will now be returned to the normal dialer.
    5. Tap on contacts, and tap the + icon to add a new. The only info you are going to add to this contact are two URL's. To add a URL, tap Add new URL. The first URL is prefs followed by a colon: prefs: and the second is i.unlock.no. Tap Save.
    6. Your contact now has two "web pages" - tap on the first one (prefs: ). This will take you to the settings dialog. The reason you want this, is because you need to connect to a Wi-Fi network, so tap on Wi-Fi, and get connected to a network, and make sure the icon on top of the screen is indicating that you are connected. While you are in the settings dialog, you should also set: General --> Auto-Lock --> Never.
    7. Now, press the home button, and again, slide for emergency dial 0, Answer the call, Hold and Decline the new call so that you get to the contacts. Tap on your contact (No Name), and this time tap on the other home page, i.unlock.no
    8. Safari will launch and show you a webpage. Tap on Tap here to jailbreak your iPhone
    9. Phone will return to activation screen and after a few seconds the phone should restart.
    10. If the phone does not restart after waiting a full minute, please make sure that you have your phone connected to the computer and try again.
    11. When the phone starts again, it should no longer say slide for emergency, but rather Slide to unlock It means it was successfull! Activation is now bypassed, and phone prepared for software installation! (If you are going to use an AT&T SIM, you won't need to do the next step.)



    Step 3: Performing the unlock

    Add http://i.unlock.no/ to Installer sources if you didn't follow this tutorial

    1. Tap on the Installer icon, and wait for it to refresh the sources
    2. Tap on Install at the bottom
    3. Scroll down to Unlocking Tools and install 1.1.2/1.1.3 OTB Unlock
    4. The process will take a few minutes, before you get a message that it completed successfully



    Step 4: Upgrade to 1.1.2
    Even though the phone is already unlocked, it will not get a signal. To fix this upgrade to 1.1.2:

    1. Open iTunes again and hold down the SHIFT key (Windows) or Option/ALT-key (Mac) on your keyboard while clicking on the Upgrade button (not the restore button!). A file browsing dialog should appear, and you must select the 1.1.2 firmware file you downloaded previously.
    2. While the phone is upgrading, download the 1.1.2 jailbreak archive and extract the files to your computer.
    3. If you don't already have Java on your computer, you need to download and install Java runtime first. If you are unsure, check the jailbreak.jar file in the archive you extracted previously - it should have an icon with a coffee cup
    4. When your phone is done upgrading, and shows the Slide for emergency screen, you need to launch the jailbreak java application on your computer. Windows users double click on the windows.bat file, while Mac users can double click on jailbreak.jar file.
    5. An application should appear, with a "Jailbreak" button - click on it and wait while it's jailbreaking. This will take a few minutes, and your phone will restart a few times at the end.
    6. Your phone should now show "Slide to unlock" instead of emergency. If it does, everything was successfull.



    Step 5: Finishing the unlock
    Now your phone will accept any SIM-card and you will get signal. Congratulations!

    But if you are using your phone in a forreign country, the Phone/SMS application will just crash.

    Open Installer and install iWorld found in the Tweaks 1.1.2 category. Start iWorld and select your country and it will fix the crashing problem.

    If you want to upgrade to 1.1.3, there's a package called Official 1.1.3 Upgrader located in the System category. Installing it will upgrade your phone to a jailbroken 1.1.3. Be aware that it will take some time (15-40 minutes).


  6. #6
    Administrator Array

    Join Date
    Oct 2007
    Posts
    4,145
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    10

    Default

    it will works but you're are more prone to make mistake.
    STEP 5: when you use the official 1.1.3 update .... This is outdated because it's considered not a "true "1.1.3

    Why go through all of this when you can do it for 3-4 minutes. The last step above ALONE is 15-40 minutes !!

    And change the subject to the right format before your post gets deleted !!!
    Last edited by dtube; 02-29-2008 at 12:04 AM.

  7. #7
    Newbie Array

    Join Date
    Oct 2009
    Posts
    6
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    Yes, the iphone Dev Team is just that awesome. They’ve released updates to RedSnow, their easy jailbreaking tool, and UltraSn0w, their iphone 3G and now 3GS unlocking tool.

    iphone With this combo, you can jailbreak your iPhone to run unofficial 3rd party applications with RedSn0w (thats RedSn0w, with a zero). Then you can use one of those unofficial 3rd party applications called UltraSn0w (again, with a zero) to unlock your phone so you can use it with a 3rd party GSM carrier.

    Note: Don’t go rushing to install the 3.1 firmware that is in beta now. Baseband upgrades can break your unlock and may make it impossible to ever unlock again.
    iphone

 

 

Similar Threads

  1. [1.1.3] 16gb Iphone unlock help
    By naheedv in forum iPhone "2G" (Rev. 1)
    Replies: 8
    Last Post: 02-27-2008, 05:28 PM
  2. 1.1.3 OTB 16GB iPhone UNLOCK!
    By airmanos in forum iPhone "2G" (Rev. 1)
    Replies: 0
    Last Post: 02-09-2008, 03:24 PM
  3. [1.1.3 OTB] is 16GB iPhone unlock possible?
    By Deten in forum iPhone "2G" (Rev. 1)
    Replies: 1
    Last Post: 02-09-2008, 12:20 PM
  4. [16GB] GeoHots Unlock working on 16GB iPhone?
    By CU3BALL in forum iPhone "2G" (Rev. 1)
    Replies: 1
    Last Post: 02-08-2008, 09:23 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBulletin®
Copyright © 2014 vBulletin Solutions, Inc. All rights reserved.
Search Engine Friendly URLs by vBSEO
(c) 2006-2012 Hackint0sh.org
All times are GMT +2. The time now is 12:21 PM.
twitter, follow us!