Page 1 of 19 1234567891011 ... LastLast
Results 1 to 10 of 188
Discuss [GUIDE] ZiPhone - unlock solution (read the warning 1st post) at the iPhone "2G" (Rev. 1) - Hackint0sh.org; Warning: Since This solution has been released we have seen an increase of bricked iPhones ...
  1. #1
    Senior Professional Array geircito's Avatar

    Join Date
    Oct 2007
    Posts
    204
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    19

    Default [GUIDE] ZiPhone - unlock solution (read the warning 1st post)

    Warning: Since This solution has been released we have seen an increase of bricked iPhones help request in the forum. This may also result in "greyed wifi" or "greyed Bluetooth", BSD minor major error, corrupted baseband and/or bootloader. Use at your own risk !

    [Warning] Use ZiPhone at your own Risk > Big WiFi issue !!!

    This guide are for every iPhone versions.
    After finishing this guide you are going to have an iPhone with 100% 1.1.3-fuctionality.


    PART 1/4


    A) PREPARATIONS
    Download and install the latest version of iTunes (7.6):
    iTunes 7.6 Win - iTunes 7.6 Mac

    Remove the PIN-code on your own sim-card using a "traditional" celluar phone.
    Put your own sim-card in iPhone.

    Before starting:
    - use usb-cable directly in iPhone, don't use the iPhone dock (easier using only the cable)
    - uninstall ALL applications and Sources in Installer....



    B) UPDATE / RESTORE iPHONE to the LAST FIRMWARE-VERSION
    There are two reasons for running through an update/restore in iTunes.
    First for updating to the lastest baseband (04.03.13_G),
    secondly because ZiPhone "demands" that iPhone are "paired" with iTunes.
    (for OTB 1.1.3 the restore is for "pairing" with iTunes, it has already baseband 04.03.13_G)


    - connect iPhone to the computer w/usb-cable
    - start iTunes
    - turn on iPhone, wait until iTunes recognize iPhone
    - click Check, click OK

    Now you must choose one of 3 choices in iTunes (it depends in what condition/firmware the iPhone is in right now)
    a) if button Check for Update is active (ie. not dimmed):
    - click Check for Update, click OK (if iTunes say that you have the latest version continue nevertheless to the next line)
    - click Restore, click Check, click Restore, wait.... continue with B2

    b) if only button Restore is active (ie. if buttons Update or Check for Update are dimmed):
    - click Restore, click Check, click Restore and Update, wait.... continue with B2

    c) if both buttons Update and Restore are active:
    - click Update, click Check, wait.... continue with B2

    B2 - Finish and quit iTunes
    After the update/restore is finished (4-5 min.):
    - wait until iTunes recognize iPhone, ignore error messages regarding non-supported SIM-card
    - click iPhone's eject-icon in the left panel (in iTunes)
    - quit iTunes
    iPhone-display is showing "slide for emergency" over a picture of a usb-kabel --> iTunes-icon
    - reboot iPhone (hold on/off-button for 5 sec), slide "slide to power off" to the right

    -
    Last edited by Former Bender; 07-03-2008 at 02:48 AM.
    iMac 24" * MacBook Pro 17" * iPod Classic 160Gb * iPhone 8Gb * iPhone 16Gb



  2. #2
    Senior Professional Array geircito's Avatar

    Join Date
    Oct 2007
    Posts
    204
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    19

    Default

    PART 2/4


    C1) RUNNING ZiPHONE in WINDOWS
    Hint: right-click download link in the browser and choose "Save As...".

    Download ziPhone for Win and extract zip-file to the desktop (folder ziphone).
    (replace the $ in the download link with S)

    Open folder ZiPhone on desktop.
    - connect iPhone to the PC w/usb-cable (it should be that already)
    - turn on iPhone (if iTunes is starting then quit iTunes)

    Doubleclick ziphoneGUI.exe.

    Depending of which version the iPhone
    was originally (when you bought it) you have 2 choices (you shall only choose one of them):

    a) iPhone that originally was a OTB 1.0.2 or OTB 1.1.1

    1) mark/choose Unlock, Activate, Jailbreak
    2) click START, wait about 2-3 min. (watch the magic scrolling down the iPhone display)
    3) when you see "slide to unlock" on iPhone click Quit
    4) on iPhone: slide "slide to unlock" to the right, click Dismiss
    5) continue the guide with D.
    An OTB 1.0.2 / 1.1.1 are now an activated, jailbroken and unlocked iPhone!!
    (Bootloader 3.9 / Baseband 04.03.13_G / Firmware 1.1.3)

    b) iPhone that originally was a OTB 1.1.2 or OTB 1.1.3

    1) mark/choose Unlock, Activate, Jailbreak, Downgrade bootloader...
    2) click START, wait about 2-3 min. (watch the magic scrolling down the iPhone display)
    3) when you see "slide to unlock" on iPhone click Quit
    4) on iPhone: slide "slide to unlock" to the right, click Dismiss
    5) continue the guide with D.
    An OTB 1.1.2 / 1.1.3 are now an activated, jailbroken and unlocked iPhone!!
    (Bootloader 3.9 / Baseband 04.03.13_G / Firmware 1.1.3)

    -
    Last edited by geircito; 02-16-2008 at 12:10 AM.
    iMac 24" * MacBook Pro 17" * iPod Classic 160Gb * iPhone 8Gb * iPhone 16Gb

  3. #3
    Senior Professional Array geircito's Avatar

    Join Date
    Oct 2007
    Posts
    204
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    19

    Default

    PART 3/4


    C2) RUNNING ZiPHONE on MAC
    Here you MUST run Leopard (this doesn't work in Tiger)

    Download ziPhone for Mac and extract zip-file to the desktop (application ZiPhone).
    (replace the $ in the download link with S)

    - connect iPhone to the Mac w/usb-cable (it should be that already)
    - turn on iPhone (if iTunes is starting then quit iTunes - don't close)

    Depending of which version the iPhone
    was originally (when you bought it) you have 2 choices (you shall only choose one of them):

    a) iPhone that originally was a OTB 1.0.2 or OTB 1.1.1

    (gui is showing "Unlock (Only for 4.6 BL)", this is a bug in the gui, it works also for 3.9 BL)
    1) mark/choose Jailbreak, Activate, Unlock
    2) click START, wait about 2-3 min. (watch the magic scrolling down the iPhone display)
    3) when you see "slide to unlock" on iPhone click Quit
    4) on iPhone: slide "slide to unlock" to the right, click Dismiss
    5) continue the guide with D (quit iTunes - configuration takes place under E2).
    An OTB 1.0.2 / 1.1.1 are now an activated, jailbroken and unlocked iPhone!!
    (Bootloader 3.9 / Baseband 04.03.13_G / Firmware 1.1.3)

    b) iPhone that originally was a OTB 1.1.2 or OTB 1.1.3

    1) mark/choose Downgrade 4.6 BL to 3.9
    2) click START, wait about 2-3 min. (watch the magic scrolling down the iPhone display)

    THEN continue with this:


    3) mark/choose Jailbreak, Activate, Unlock
    4) click START, wait about 2-3 min. (watch the magic scrolling down the iPhone display)
    5) when you see "slide to unlock" on iPhone click Quit
    6) on iPhone: slide "slide to unlock" to the right, click Dismiss
    7) continue the guide with D (quit iTunes - configuration takes place under E2).
    An OTB 1.1.2 / 1.1.3 are now an activated, jailbroken and unlocked iPhone!!
    (Bootloader 3.9 / Baseband 04.03.13_G / Firmware 1.1.3)

    -
    Last edited by geircito; 02-15-2008 at 09:50 PM.
    iMac 24" * MacBook Pro 17" * iPod Classic 160Gb * iPhone 8Gb * iPhone 16Gb

  4. #4
    Senior Professional Array geircito's Avatar

    Join Date
    Oct 2007
    Posts
    204
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    19

    Default

    PART 4/4

    D) INSTALL NECESSARY APPLICATIONS
    If you don't see the Wi-Fi icon on the statusbar then do the following:
    - click Settings-icon on iPhone, click Wi-Fi,
    -- click the name of your Wi-Fi network, write password, click Join
    -- click home-button

    - click Installer-icon on iPhone (if asked update Installer)
    - click Sources-icon, click Refresh (upper left), wait a little...
    - if Update-icon has a red number,
    -- click Update-icon, click Update All, wait a little..., click OK
    - click Install-icon, scroll down and click Sources,
    -- click Community Sources, click Install, click Install, wait a little..., click OK
    (if you don't see Community Sources here, then it's already installed)
    - click Install-icon, scroll down and click System,
    -- click BSD Subsystem, click Install, click Install, wait a little...
    --- notice the warning regarding the password change, click OK, wait a little...
    -- scroll down and click System
    -- scroll down and click OpenSSH, click Install, click Install, wait.., click OK
    - click home-button, slide "slide to unlock" to the right
    - reboot iPhone (hold on/off-button for 5 sec), slide "slide to power off" to the right
    - turn on iPhone (hold on/off-button for 2 sec)



    E) SUPPLEMENTARY WORK AFTER 113 UPGRADE
    E1) Set correct timezone
    - click Settings-icon on iPhone, click General,
    -- click Date & Time, click 24-Hour Time/OFF to ON,
    -- click Set Automatically/OFF, click Time Zone,
    -- click X (upper right), write & click the name of the capital of your country
    (now time/date will be set automatically)
    -- click Set Automatically (ON)
    -- click Time Zone (under Calendar), click X (upper right),
    -- write & click the name of the capital of your country
    - click home-button

    E2) Link iTunes Store-account with iPhone
    - connect iPhone to the computer with usb-cable
    - start iTunes, wait..., write the name for your iPhone
    -- iTunes: untick "Automatically sync contacts, calendars...", click Done
    - iTunes: untick "Options / Automatically sync when this iPhone is connected"
    - iTunes: untick all sync-options in all categories (tabs)
    - iTunes: return to the Summary-category/tab, click Apply
    - iTunes: click iPhone's eject-icon in the left panel
    - quit iTunes



    F) MAKE SPACE: MOVE the FONT folder
    Moving the Font folder for releasing more space on the system partition is essential.
    After moving the Font folder, you will have more enough space to install
    plenty applications, so it shouldn't be necessary to move the Application folder.
    (this source is from Norway using some norwegian language, but I'll guide you...)

    - click Settings-icon on iPhone, click General, click Auto-Lock, click Never
    - click home-button
    - click Installer-icon on iPhone
    - click Sources-icon, click Edit (upper right), click Add (upper left)
    -- write http://install.ifon.no, click OK, wait a little..., click Done (upper right)
    - click Install-icon, scroll down and click iFon Public Beta,
    -- click "Jeg er Beta Tester hos...", click Install, click Add to Queue
    -- click "Flytt Font Mappen", click Install, click Install
    -- click Yes, click Yes, click OK, wait a minute..., click OK
    - click Uninstall-ikon, click "Jeg er Beta Tester hos...",
    -- click Uninstall, click Uninstall, click Yes, click OK
    - click home-button, slide "slide to unlock" to the right
    - reboot iPhone (hold on/off-button for 5 sec), slide "slide to power off" to the right
    - turn on iPhone (hold on/off-button for 2 sec)



    G) SOLVING PROBLEMS

    Help, after running ziPhone iPhone still shows "slide for emergency"
    Run ziPhone again, but this time mark/choose ONLY these 2 choices:
    Activate and Jailbreak


    Help, I have problem with Mail, it doesn't work as it should
    - click Installer-icon on iPhone,
    - click Install-ikon, scroll down and click iClarified,
    -- scroll down and click Syncfix, click Install, click Install, wait a little...
    - click home-button, slide "slide to unlock" to the right
    - reboot iPhone (hold on/off-button for 5 sec), slide "slide to power off" to the right
    - turn on iPhone (hold on/off-button for 2 sec)


    Help, Wi-Fi doesn't work
    - click Installer-icon on iPhone,
    - click Install-icon, scroll down and click Utilities,
    -- scroll down and click BossPrefs, click Install, click Install, wait a little...
    - click home-button, slide "slide to unlock" to the right
    - click BossPrefs-icon on iPhone,
    - WiFi: click ON (ie. you turn it off), wait a little, click ON again


    Help, EDGE doesn't work
    - click Installer-icon on iPhone,
    - click Install-icon, scroll down and click Utilities,
    -- scroll down and click BossPrefs, click Install, click Install, wait a little...
    - click home-button, slide "slide to unlock" to the right
    - click BossPrefs-icon on iPhone,
    (if gui shows that Wifi is off, even if you see the Wi-Fi-icon on the statusbar: click ON)
    - Edge: click ON (ie. you turn it off), wait a little, click ON again
    If you now wish that EDGE shall always be turned off: click ON (ie. you turn off to OFF)


    Help, I have 300Mb under Other in iTunes
    This is a bug in the latest version of iTunes - nothing to worry about.


    Help, iTunes don't let me continue - nagging about wrong SIM-card
    - put the sim-card that came with iPhone in the iPhone
    - put your sim-card in iPhone before you start running ziPhone.


    Help, iTunes showing error (1603)
    Restart computer and start over.


    Help, there are no sound coming out of iPhone
    - click Settings-icon on iPhone, click General,
    -- scroll down and click Reset, click Reset All Settings, click Reset All Settings
    iPhone will reboot automatically.
    After this you must log on to your Wi-Fi network again.


    Help, it seems like iPhone is not fully jailbreaked
    - click Installer-icon on iPhone
    - click Sources-icon, click Edit (upper right), click Add (upper left)
    -- write http://i.unlock.no, click OK, wait a little..., click Done (upper right)
    - click Install-icon, scroll down and click Unlocking Tools,
    -- scroll down and click ZiPhone iBrickr Fix, click Install , click Install, wait a little...
    - click home-button, slide "slide to unlock" to the right
    - reboot iPhone (hold on/off-button for 5 sec), slide "slide to power off" to the right
    - turn on iPhone (hold on/off-button for 2 sec)


    Help, I don't get any signal from my provider - calling doesn't function
    First try this:
    - click Settings-icon on iPhone, click General,
    -- scroll down and click Reset, click Reset All Settings, click Reset All Settings
    iPhone will reboot automatically.
    (after this you must log on to your Wi-Fi network again)
    It that didn't solve your problem:
    If you have an older iPhone OTB 1.0.2 (or OTB 1.1.1)
    and don't know or are unsure what earlier unlocking method that was
    used for unlocking your iPhone (ie. older versions of anySIM, unlock.app, ....),
    then you must virginize your iPhone following this guide:
    How to "Virginize" the iPhone to repair the baseband?


    Now there is no need to use a x-simcard (StealtSIM, TurboSIM, ....)



    -
    Last edited by geircito; 02-16-2008 at 02:14 PM.
    iMac 24" * MacBook Pro 17" * iPod Classic 160Gb * iPhone 8Gb * iPhone 16Gb

  5. #5
    Senior Professional Array ridderdk's Avatar

    Join Date
    Jan 2008
    Location
    Denmark
    Posts
    153
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    14

    Default

    Great, another guide........

    What's with the Donate button????


  6. #6
    Professional Array

    Join Date
    Oct 2007
    Location
    Tiuana
    Posts
    79
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    10

    Default



    donate????? wtf....

  7. #7
    Professional Array

    Join Date
    Feb 2008
    Posts
    51
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    9

    Default

    Can't a guy ask for a little money for making a guide, I see nothing wrong with it.

  8. #8
    Senior Professional Array ridderdk's Avatar

    Join Date
    Jan 2008
    Location
    Denmark
    Posts
    153
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    14

    Default

    I don't think this forum was meant for that, correct if i'm wrong!?

  9. #9
    Advanced Array

    Join Date
    Oct 2007
    Location
    Chicago
    Posts
    45
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    Don't see why not.. Good job, nice guide..

  10. #10
    Senior Professional Array ninja_pimp's Avatar

    Join Date
    Oct 2007
    Posts
    326
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    28

    Default

    putting a paypal button is pretty lame.
    he did great with the guide but then to ask for donations is pathetic.
    he gets 2 thumbs down


 

 
Page 1 of 19 1234567891011 ... LastLast

Similar Threads

  1. Replies: 13
    Last Post: 12-25-2009, 10:11 AM
  2. Replies: 11
    Last Post: 04-04-2008, 03:52 AM
  3. Unlock Solution: gUnlock vs ZiPhone
    By hcaz in forum iPhone "2G" (Rev. 1)
    Replies: 6
    Last Post: 03-04-2008, 10:21 PM
  4. Replies: 4
    Last Post: 12-28-2007, 10:30 PM
  5. Warning! anySIM ! Read!
    By nemo66 in forum General
    Replies: 7
    Last Post: 09-18-2007, 08:32 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBulletin®
Copyright © 2014 vBulletin Solutions, Inc. All rights reserved.
Search Engine Friendly URLs by vBSEO
(c) 2006-2012 Hackint0sh.org
All times are GMT +2. The time now is 02:30 AM.
twitter, follow us!