Page 1 of 52 12345678910112151 ... LastLast
Results 1 to 10 of 511
Discuss Complete Adjoined Guide to Downgrade and Unlock 1.1.1 at the iPhone "2G" (Rev. 1) - Hackint0sh.org; First off, I want to thank the Dev Team for all their hard work, Rebornsoul ...
  1. #1
    Amazingly Knowledgeable Array carlosvaldosta's Avatar

    Join Date
    Sep 2007
    Posts
    763
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    46

    Talking Complete Adjoined Guide to Downgrade and Unlock 1.1.1

    First off, I want to thank the Dev Team for all their hard work, Rebornsoul for helping to answer questions on my other guide while I was down a laptop...Still am actually...Brasuco for PACAY, and Stealth for makeing a easy guide to follow.

    This will work with both a Virgin 1.1.1, and a bonehead upgrade to 1.1.1

    Last i want to say that i take no credit for anything. I am here to make it easier for everyone who wants to downgrade and unlock, not to say that any other guide is difficult, but i have a thing for giving good directions!

    Now this guide is for those who may not have too much experience with SSH or Putty, however i will make it as easy as possible.

    Pre-instructions: Create a new folder on your desktop and name it whatever you want, but put all downloaded files here.

    Downloads: You will need everything from my previous Thread here:

    http://www.hackint0sh.org/forum/showthread.php?t=6637
    (I like using itunes 7.4.1.2, and i would recommend everyone use it as it has givin me no issues so far)
    and also http://iphone.exploit.org/pxl/Installer-2.63.pxl

    Then you will need this great package from Stealth:
    (Bottom of page)
    http://www.hackint0sh.org/forum/showthread.php?t=10863
    ***when you extract the files you will need to rename secpack40113.bin to secpack (no extension...just secpack)

    Download Open SSH here : http://iphone.exploit.org/pxl/OpenSSH-4.6p1.pxl

    Download Putty here: http://the.earth.li/~sgtatham/putty/.../x86/putty.exe

    You will also need bbupdater, which i can't post, but there are 1000 ways to get it.

    Last you need open normal WiFi access.

    Same rules follow as last guide: READ EVERY STEP BEFORE DOING IT!

    1) Make Sure iphone is off. Open itunes (Ver 7.4.1.2)

    2) plug your phone into your PC, and as soon as the gray apple appears, press and hold both power and home buttons. Hold for exactly 10 seconds, then let go of just the power button.(If you look very closely, after about 7 seconds the screen will power down and pixelate, this is the lead in to the hidden restore state.) After about another 15 Seconds of holding down the Home button, itunes will find your iphone and say it needs to restore.

    3) Shift - Restore and select the 1.0.2 Firmware. When it completes it will give you "1013" error message, press ok, and do not restore again... Just close itunes.

    ***From this point on you may have to run apptapp several times, depending on your PC***

    4) Open apptapp, select 1.0.2, and press ok. AppTapp should go thru the whole process, and may give you an error. Close AppTapp and open it again. Run AppTapp again on 1.0.2, and it should complete without an error.

    ***If at this step you do not see the "Waiting for Activation" screen, you will have an extra step. if you do see the activation screen skip below the star.

    *)If you have a Yellow Triangle still, you wil need to go into the folder you unzipped ibrickr. There is a icon that says iphoneinterface.exe. Double click, and you will get a prompt you can type from. Type "setenv auto-boot true" then hit enter. Then type "saveenv" then hit enter again. Last type "fsboot" and hit enter again. Close the command window, and after about 5 seconds you will see the Activation screen on your iphone, you may have to turn off and back on.

    5) Open Itunes, let it "see" the iphone, close itunes, then Run AppTapp one last time, then Run Paycay to Jailbreak.(if you need detailed instructions for these steps look at my previous guide steps 7 and 8)

    6) You should now be unbricked, and jailbroken. Go to Settings -> General -> Auto lock -> set to never. Open iBrickr, and click applications.
    Install unlock-fast.pxl, installer.pxl, and OpenSSH-4.6p1.pxl

    7) Now go to the files menu on iBrickr, and click on /usr, when it changes directory, click on /bin. You will need to upload the following files to this directory: ICE03.14.08_G.eep, ICE03.14.08_G.fls, bbupdater, secpack, and ieraser

    8) Make sure you are connected to WiFi on your PC, and on the iphone. Get your ip address from your iphone(click settings, wifi, select a network, press the little blue arrow to look at details, and you ip address should be here)l
    Open Putty, it will have the correct settings already, all you will need to do is enter the ip address that you got from above, and hit Open at the bottom.

    9) Putty will open a new terminal window. if you are using a pay wifi access point you may have some issues here, thus the recommendation of a normal wifi connection above. Putty will open and it will ask you for a username, enter "root"
    next it will ask you for a password... this can take a few seconds depending on your connection. type "dottie", and hit enter.(when you type in dottie it will not appear at the prompt... Just type it in and hit enter)(if you do not get a prompt for a password, close putty and relogin. it can take a couple of tries)

    10) You are in the root of your iphone. type "launchctl remove com.apple.CommCenter" (capitals ARE required)

    11) Now type cd /usr/bin (this will change you to the right directory, on one phone it would not allow me to do this and i had to cd /usr then hit enter, then cd /bin then hit enter again...not sure why)

    12) You are now in the folder where all of the files you copied over. Type "chmod 775 ieraser" then hit enter. Next type "chmod 775 bbupdater" then hit enter.
    now type "bbupdater -v" it should poll the firmware, and report back after a few seconds.

    13) Type "ieraser". You are now erasing your firmware!(if it hangs while looking for files, you will have to close out putty and start from step 11 again)

    14) When ieraser finishes run "bbupdater -v" again and it will fail, this is ok. When it fails type in "bbupdater -e ICE03.14.08_G.eep -f ICE03.14.08_G.fls", you are now reloading your firmware.

    15)When it completes, type in "bbupdater -v" one last time and it will give you your correct firmware version.(a couple of times after the update finished "Putty" would show up on the command line...just delete it and type in the command)

    16) Click on iunlock on your springboard, press start. Wait until it finishes, then turn off your iphone. If this is a Virgin iphone, take out the ATT Sim and say "This sim has been freed by The Liberator! AKA CarlosValdosta!!!" <-- Very important step!

    17) Put your sim in and turn on your Unlocked iphone FW 1.0.2!

    18) Go back to applications on ibrickr, remove iunlock.pxl, and the openSSh.pxl...and if you want the installer.pxl.

    19) Have Fun!

    20) Donate to DevTeam... they deserve it!

    (updates will come when it gets easier)
    Last edited by carlosvaldosta; 10-16-2007 at 08:26 PM.



  2. #2
    Senior Professional Array

    Join Date
    Sep 2007
    Location
    Cupertino
    Posts
    203
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    17

    Default

    Nice work carlos. PM me when the easier one click GUI is released!

  3. #3
    Senior Professional Array rebornsoul's Avatar

    Join Date
    Sep 2007
    Posts
    300
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    23

    Default

    omg u are the man!

  4. #4
    Amazingly Knowledgeable Array carlosvaldosta's Avatar

    Join Date
    Sep 2007
    Posts
    763
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    46

    Default

    This really cannot be much easier. I guarantee if you follow you will be playing with your unlocked iphone in 30 minutes!

  5. #5
    Senior Professional Array rebornsoul's Avatar

    Join Date
    Sep 2007
    Posts
    300
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    23

    Default

    hope they sticky this, even if they dont, its a good guide!


  6. #6
    Senior Professional Array

    Join Date
    Sep 2007
    Location
    Cupertino
    Posts
    203
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    17

    Default

    Quote Originally Posted by carlosvaldosta View Post
    This really cannot be much easier. I guarantee if you follow you will be playing with your unlocked iphone in 30 minutes!
    Fortunately for me, i have a backup 4GB that i am using! Yep, am waiting for that one click solution

  7. #7
    prs
    prs is offline
    Rookie Array

    Join Date
    Sep 2007
    Posts
    13
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    Ok, it is right that that is a Tuturial to unlock 1.1.1 complete with everything. And this works ?

  8. #8
    Amazingly Knowledgeable Array carlosvaldosta's Avatar

    Join Date
    Sep 2007
    Posts
    763
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    46

    Default

    Eh...thats cool... it will come soon.

  9. #9
    Amazingly Knowledgeable Array carlosvaldosta's Avatar

    Join Date
    Sep 2007
    Posts
    763
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    46

    Default

    Quote Originally Posted by prs View Post
    Ok, it is right that that is a Tuturial to unlock 1.1.1 complete with everything. And this works ?
    8 phones today says yes!

  10. #10
    Board Hero Array gaz919's Avatar

    Join Date
    Sep 2007
    Posts
    1,124
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    65

    Default

    most likelly there won't be a one click app solution as it would need the .fls .eep and bbupdater and secpack in it and this site and the dev team do not want to distribute these files as it they are copyrighted


 

 
Page 1 of 52 12345678910112151 ... LastLast

Similar Threads

  1. [Guide] Downgrade: iPhone 2G on 2.0 to 1.1.4 + total unlock - best tutorial! ;)
    By aRt in forum Genius Bar - HowTos, Guides and Tutorials
    Replies: 19
    Last Post: 08-06-2011, 10:11 AM
  2. Replies: 10
    Last Post: 10-05-2008, 05:43 AM
  3. Replies: 29
    Last Post: 10-18-2007, 10:53 AM
  4. A Complete Guide To Sim Cloning
    By deepdark in forum Turbo-, Supersim and Simcloning Solution
    Replies: 8
    Last Post: 07-30-2007, 08:25 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBulletin®
Copyright © 2014 vBulletin Solutions, Inc. All rights reserved.
Search Engine Friendly URLs by vBSEO
(c) 2006-2012 Hackint0sh.org
All times are GMT +2. The time now is 12:29 PM.
twitter, follow us!