Discuss Basebands, Sec_Pacs and Unlocking 1.1.3 at the iPhone "2G" (Rev. 1) - Hackint0sh.org; I am writing this in hopes to clarify things us newcomers on the scene do ...
Basebands, Sec_Pacs and Unlocking 1.1.3
I am writing this in hopes to clarify things us newcomers on the scene do not know. If anyone could answer all these questions in one thread I feel it would be a great help to the mass'.
1. What is Baseband? And how does one find out what version they have with a new 1.1.3 phone (OTB) Out the box, unactivated?
2. What is a Sec_Pac and what is it used for?
3. As of February 8th is 1.1.3 unlockable to any network, if so does unlocking it mean you get to keep 1.1.3 and all its features and what methods are there to go abouts doing this?
Any answers would be much apprieciated!
Thanks ~ MechX2
Baseband is the primary modem software, it controls all communication of the iphone , this is wat we try to get free to be used by different non approved sims.
Originally Posted by MechX2
You can find out the baseband on an unactivated phone by entering
*3001#12345#* and pressing the call button,
Now if the Modem version is
04.03.13_G - This is a OTB 1.1.3 Phone
04.02.13_G - This is a OTB 1.1.2 Phone
04.01.13_G - This is a OTB 1.1.1 Phone
This is for phones which have never been opened!
Secpack is Used for erasing BB firmware ie the files associated with the number given above.
Originally Posted by MechX2
Yes you can unlock any version as of now, refer to all the guides
Originally Posted by MechX2
or go here
Search before you post
iPhone 3GS 32Gb
Hope this would be helpfull :
The iPhone is a small computer with two processors, some RAM and some eraseable FLASH for long-term storage (the 8GB of storage).
ARM Core: This is the processor used to run the Operating System (the OS), which is a scaled down version of MAC OS X. The job of the OS is as a general manager of the phone's resources (RAM, FLASH, Baseband, etc...) , as well as overview the concurrent running of the phone's applications.
Baseband: This is the processor that manages all the functions which need an antenna. The GSM phone, as well as the WiFi and bluetooth are all under the control of the baseband processor. The baseband processor has its own RAM and FLASH resources, separate from the ARM core resources. The baseband processor is a resource to the OS.
Boot Loader: This is a (normally) very small program in non-volatile memory (can be FLASH, often is un-eraseable) that 'bootstraps' a processor startup and calls the main (usually much larger) program. The boot loaderhas also the responsibility to provide a protocol for obtaining and storing an updated version of the main program. Normally, the boot loader changes very rarely, as there is no need to. It is the main program that gets upgraded, not the boot loader. Also, if something happens during the update of the main program, the boot loader will always be there to save you and restore the main program with a good one. However, when you update the boot loader, if anything bad happens, then you have no more boot loader, which means that the processor will not restart at all. A Brick.
Question: how are bootloaders first programmed into the system? The answer is left as an exercise to the student...
The ARM core processor has its own bootloader for restoring the OS, which implements the so-called <DFU mode>.
The Baseband processor also has its own boot loader too. That boot loader is a lot more hardened with crypto protection, and will not normally let you update the baseband program with one that is not digitally signed with the special Infineon crypto key. Infineon are the makers of the baseband processor. However, there is a bug in version 3.9 of the baseband bootloader that enables re-programming the baseband even with a version that has the wrong crypto signature. Thus, with a 3.9 boot loader, anything is possible.
However, with the new 4.x bootloader, the backdoor has been closed and we are back to square one: any update to the baseband must be cryptographically signed with the correct signature. That is why no unlock is possible at the moment.
Now, finding the key is next to impossible. For the unlock to work, some people must find a new crack in the bootloader, a new backdoor. Considering that Apple must have put quite a bit of pressure on Infineon in order to have a well protected bootloader this time, I would tend to think that it might take some time before a crack is actually found.
Time will tell. (TIME HAD TOLD, GeoHot Rules !!!!
WHAT HAPPENS WHEN I UPGRADE:
When you upgrade (or restore), the OS will be changed to whatever version you want (1.0.2, 1.1.1, 1.1.2) , however the baseband bootloader will only allow baseband firmware updates UP in the version chain. Never down. Moreover, the bootloader itself is not upgraded or changed in any way (that would be quite daring to do for Apple). Which is why when you restore a UK phone from 1.1.2 to 1.1.1 you still have the new 4.02.13 baseband firmware and bootloader 4.x. It is UNLOCKABLE at the moment. And which is also why you can restore from an original 1.1.1 US phone (with bootloader 3.x) to 1.1.2 (it then has baseband 4.02.13, but still bootloader 3.x), then restore down to 1.0.2 and unlock the baseband 4.02.13 (because bootloader 3.x has backdoor and allows unlock) and then can re-upgrade all the way up to 1.1.2 (only the OS changes, the 4.02 baseband firmware is already there and does not get updated, it is already at highest version, thus it stays unlocked).
This is from som thread from this forum.
Awsome, You guys really helped me out Thanks!
Also I downgraded my 1.1.3 16GB to 1.1.1 then back to 1.1.2 and finally to 1.1.3 but youtube says must connect itunes to internet... Any Ideas?
Before anyones quick to jump the gun I forgot to mention I installed YouTube activator off i.unlock.no and restarted the phone with no luck.
By Hanybv in forum Ultrasn0w (3G(S)/iPhone 4 unlock)
Last Post: 10-15-2013, 05:44 PM
By unclemiltie in forum iOS 4.x (iPhone OS 4.x)
Last Post: 05-24-2011, 10:19 AM
By vikram in forum Ultrasn0w (3G(S)/iPhone 4 unlock)
Last Post: 04-25-2011, 10:49 AM
By syntrak in forum Yellowsn0w (3G unlock)
Last Post: 05-11-2009, 10:02 AM
By TATANKA in forum PwnageTool
Last Post: 12-29-2008, 01:46 AM