Page 1 of 2 12 LastLast
Results 1 to 10 of 19
Discuss 148 iphones unlocked, stuck with 2 at the iPhone "2G" (Rev. 1) - Hackint0sh.org; i unlocked around 148 iphones last week using anysim 1.02 everything went fine except the ...
  1. #1
    Professional Array

    Join Date
    Oct 2007
    Posts
    64
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    10

    Arrow 148 iphones unlocked, stuck with 2

    i unlocked around 148 iphones last week using anysim 1.02 everything went fine except the 2 which are driving me nuts. All are 1.0.2 versions, never downloaded the 1.1.1

    1. Tried unlocking thrice, still give "Incorrect SIM: This iPhone must be used with an approved SIM. "
    I searched around and found that this means phone is activated but not sim unlocked. anysim 1.02 doesnot give any error wheres the older version gives sim unlocking error.

    2. The iPhone screen blinks white and black when turned on, doesnot goes to itunes restore mode
    The upgrade process was hanged while flashing the firmware 1.0.2 from 1.0.0, i waited for an hour and then disconnected the phone. Since then i am having such problems. it doesnot even goes to itunes restore mode pressing the home and power buttons.

    I am on a windows xp, all phones jailbreaked through apptapp, activated by pacay, anysim installed by iBricker. Please suggest me a suitable approach to get the other two working. thanks to dev team for making the unlock possible.



  2. #2
    bmn
    bmn is offline
    Senior Professional Array

    Join Date
    Sep 2007
    Location
    earth
    Posts
    100
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    12

    Default

    do a restore to 1.0.2 then try it again happened to me once, but after the restore everything worked fine

  3. #3
    Senior Professional Array

    Join Date
    Sep 2007
    Posts
    148
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    16

    Default

    I think if you downgrade to 1.0 and then back up, this also increases your nck count. So maybe you are out of the three tries.

  4. #4
    Professional Array

    Join Date
    Sep 2007
    Posts
    57
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    9

    Default

    Hey aakash,

    For the first one try unlock with 'unlock-fast.pxl', if that doesn't work then do a restore and try again and if that still doesn't work then reflash your baseband.

    For the second one, when you have it docked then run apptappinstaller, it might be able to fix your problem. if that doesn't work then undock your phone and then turn-off your phone, hold down the 'Home' button and connect it to your computer while your still holding down the home button until the restore thingie comes up.

  5. #5
    Newbie Array

    Join Date
    Oct 2007
    Posts
    3
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    I have3 a similar situation but before I ask my question here is my suggestion for the contstant reboot problem.
    I had that but it went away after running apptap.

    Here is my situation that I would appreciate any help with:
    I had 6 iphones from apple which all unloked just fine and recognized the local arrier (Rogers in Canada).
    I have 4 iphones which I bought from AT&T that I can not get to recognize my local carrier.
    They are not 1.1.1, they are 1.0.2 (i comfimred this).
    I can get the phones unlocked but I can not get the carrier to show up in the top left corner. I used AnySIM (latest version) and it did not seem to do anything.

    I can get the 5 little bars up there (at least it does not say NO SERVICE, which I also had at first) but it seems as if the 4 phones from AT&T have some additional step to get them to recognize the SIM card.

    Anyone else with this issue or has anyone been able to narrow it down to what this final remaining step is?


  6. #6
    Professional Array

    Join Date
    Sep 2007
    Posts
    57
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    9

    Default

    Can you make and recieve calls?
    Try calling your voicemail.

  7. #7
    Advanced Array

    Join Date
    Sep 2007
    Posts
    46
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    i just unlock 30+ iphones but if i encoutered 1 that can be unlocked, i just virginized it using a tutorial in the forum.

    for blinking, i found that connecting to dock help it to boot in recovery.

  8. #8
    Professional Array

    Join Date
    Sep 2007
    Posts
    74
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    10

    Default

    There is no method more reliable than the manual non-GUI way. I've done many and have had practically no problems (no issues relating to phone/wireless functions).

  9. #9
    Newbie Array

    Join Date
    Oct 2007
    Posts
    3
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    please share the best location for using the manual non-GUI method that you followed.

  10. #10
    Senior Professional Array

    Join Date
    Sep 2007
    Posts
    436
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    Quote Originally Posted by aakash View Post
    i unlocked around 148 iphones last week using anysim 1.02 everything went fine except the 2 which are driving me nuts. All are 1.0.2 versions, never downloaded the 1.1.1

    1. Tried unlocking thrice, still give "Incorrect SIM: This iPhone must be used with an approved SIM. "
    I searched around and found that this means phone is activated but not sim unlocked. anysim 1.02 doesnot give any error wheres the older version gives sim unlocking error.

    2. The iPhone screen blinks white and black when turned on, doesnot goes to itunes restore mode
    The upgrade process was hanged while flashing the firmware 1.0.2 from 1.0.0, i waited for an hour and then disconnected the phone. Since then i am having such problems. it doesnot even goes to itunes restore mode pressing the home and power buttons.

    I am on a windows xp, all phones jailbreaked through apptapp, activated by pacay, anysim installed by iBricker. Please suggest me a suitable approach to get the other two working. thanks to dev team for making the unlock possible.
    dude i think ur out of luck , u have probably used all attempts, before you started unlocking them were they hacked already?
    Search before you post

    Alienware M15x

    iPhone 3GS 32Gb


 

 
Page 1 of 2 12 LastLast

Similar Threads

  1. Replies: 1
    Last Post: 06-18-2009, 04:14 PM
  2. Replies: 2
    Last Post: 03-24-2009, 12:56 AM
  3. 1.12 OTB HW unlocked but stuck (no baseband)
    By matten in forum iPhone "2G" (Rev. 1)
    Replies: 1
    Last Post: 01-22-2008, 02:07 PM
  4. Officially unlocked iPhones not really unlocked
    By jimwilx1 in forum iPhone "2G" (Rev. 1)
    Replies: 18
    Last Post: 12-14-2007, 11:40 PM
  5. HELP!!! I'm stuck with an unlocked 1.1.1 cant restore to 1.0.2
    By SilverStar29 in forum iPhone "2G" (Rev. 1)
    Replies: 9
    Last Post: 11-08-2007, 04:33 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBulletin®
Copyright © 2014 vBulletin Solutions, Inc. All rights reserved.
Search Engine Friendly URLs by vBSEO
(c) 2006-2012 Hackint0sh.org
All times are GMT +2. The time now is 02:01 PM.
twitter, follow us!