Page 1 of 2 12 LastLast
Results 1 to 10 of 18
Discuss [1.1.4] Stuck in No Service at the iPhone "2G" (Rev. 1) - Hackint0sh.org; I'm trying to sort out an O2 (UK) iPhone for a friend with an Orange ...
  1. #1
    Newbie Array

    Join Date
    May 2008
    Posts
    8
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default [1.1.4] Stuck in No Service

    I'm trying to sort out an O2 (UK) iPhone for a friend with an Orange sim. As far as I know it came with fw 1.1.2 and it was then unlocked and all that working fine (by methods unknown to me) until he upgraded to 1.1.4 via iTunes.

    Now, no matter what I do it always ends up with 'No Service' so none of the phone functions work, although everything else does once it's activated. I've trawled through loads of message board posts and guides and it seems like there are a few with similar problems where in the end the phone function just isn't working.

    I've tried pretty much everything including Ziphone 3.0, iPlus 2.0b, iLiberty+ and finally winpwn 0.99.2.19 - after each try restoring back to 1.1.4 in iTunes. I've tried downgrading to an earlier firmware but iTunes stops with an error. I managed to get 1.1.3 on there at one point somehow but again with the 'No Service'.

    I've been messing around for hours on it to no avail. Any suggestions would be appreciated! I've currently got a custom 1.1.4 loaded via winpwn with stuff like bb info and bootneuter on there. If it helps here's some of the info shown:

    Model: iPhone1,1
    Model Number: MB213B/A

    Modem Firmware: 03.14.08_G
    EEPROM Version: 207
    EEPROM Version: 7
    Bootloader Version: 3.9_M3S2

    edit: Sorry, noobie mistake. Also.. it seems it's just a 0049 bad imei issue. Who'd've thought reading stickies would actually help?
    Last edited by doobymoo; 05-16-2008 at 02:19 PM.



  2. #2
    Former Bender
    Guest

    Default

    Hi, welcome to Hackint0sh.

    Your thread's title has been renamed because it was not in conformity.

    Read my signature about the thread's title format, thanks.

  3. #3
    iPhone Moderator Array

    Join Date
    Aug 2007
    Posts
    3,620
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    220

    Default

    Quote Originally Posted by doobymoo View Post
    I'm trying to sort out an O2 (UK) iPhone for a friend with an Orange sim. As far as I know it came with fw 1.1.2 and it was then unlocked and all that working fine (by methods unknown to me) until he upgraded to 1.1.4 via iTunes.

    Now, no matter what I do it always ends up with 'No Service' so none of the phone functions work, although everything else does once it's activated. I've trawled through loads of message board posts and guides and it seems like there are a few with similar problems where in the end the phone function just isn't working.

    I've tried pretty much everything including Ziphone 3.0, iPlus 2.0b, iLiberty+ and finally winpwn 0.99.2.19 - after each try restoring back to 1.1.4 in iTunes. I've tried downgrading to an earlier firmware but iTunes stops with an error. I managed to get 1.1.3 on there at one point somehow but again with the 'No Service'.

    I've been messing around for hours on it to no avail. Any suggestions would be appreciated! I've currently got a custom 1.1.4 loaded via winpwn with stuff like bb info and bootneuter on there. If it helps here's some of the info shown:

    Model: iPhone1,1
    Model Number: MB213B/A

    Modem Firmware: 03.14.08_G
    EEPROM Version: 207
    EEPROM Version: 7
    Bootloader Version: 3.9_M3S2

    edit: Sorry, noobie mistake. Also.. it seems it's just a 0049 bad imei issue. Would've thought reading stickies would actually help?
    Modem Firmware and Bootloader version look like the iPhone was on Firmware 1.0.2 and not 1.1.2. Before you updated to 1.1.4, did you virginize the iPhone?
    I would guess it was unlocked with an old Anysim version at 1.0.2, then it has to be virginized.
    After that you could restore to Firmware 1.1.4, then unlock it.

    volkspost
    Read the stickies and search the forum before posting!
    If you want to become a Hackint0sh supporter click here
    ----------
    iPhone 4 factory unlocked, iOS 4.3.1, jailbroken
    iPad Wi-Fi + 3G (1G), iOS 4.3.1, jailbroken
    iPad 2

  4. #4
    Newbie Array

    Join Date
    May 2008
    Posts
    8
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    I'm not sure, when I got my hands on it it was already at 1.1.4. I'm guessing it wasn't virginized before upgrading.

  5. #5
    Newbie Array

    Join Date
    May 2008
    Posts
    8
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    I've just noticed that it won't even make emergency calls. It'll just beep 3 times and end call no matter what I dial. Seems pretty dead to me


  6. #6
    iPhone Moderator Array

    Join Date
    Aug 2007
    Posts
    3,620
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    220

    Default

    Quote Originally Posted by doobymoo View Post
    I've just noticed that it won't even make emergency calls. It'll just beep 3 times and end call no matter what I dial. Seems pretty dead to me
    OK, to clear out some stuff. Can you go to Settings -> General ->Info please.

    Tell us what it reads for
    Version
    Serialnumber (just the first 5-6 chars/digits to check what it may have been ootb)
    Modem Firmware

    One more: Whats the error when you tried to downgrade?

    volkspost
    Last edited by volkspost; 05-16-2008 at 09:05 PM. Reason: additional question
    Read the stickies and search the forum before posting!
    If you want to become a Hackint0sh supporter click here
    ----------
    iPhone 4 factory unlocked, iOS 4.3.1, jailbroken
    iPad Wi-Fi + 3G (1G), iOS 4.3.1, jailbroken
    iPad 2

  7. #7
    Newbie Array

    Join Date
    May 2008
    Posts
    8
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    Quote Originally Posted by volkspost View Post
    OK, to clear out some stuff. Can you go to Settings -> General ->Info please.

    Tell us what it reads for
    Version
    Serialnumber (just the first 5-6 chars/digits to check what it may have been ootb)
    Modem Firmware

    One more: Whats the error when you tried to downgrade?

    volkspost
    Sure. I'd pretty much given up on it and ended up updating to the latest again.

    Version 1.1.4(4A102)
    Serial 7U7422
    Modem Firmware 04.04.05_G

    The downgrade error was actually just the 1013, 1015 error it spits out in iTunes. I now know the phone actually can downgrade successfully.

  8. #8
    iPhone Moderator Array

    Join Date
    Aug 2007
    Posts
    3,620
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    220

    Default

    Quote Originally Posted by doobymoo View Post
    Sure. I'd pretty much given up on it and ended up updating to the latest again.

    Version 1.1.4(4A102)
    Serial 7U7422
    Modem Firmware 04.04.05_G

    The downgrade error was actually just the 1013, 1015 error it spits out in iTunes. I now know the phone actually can downgrade successfully.
    Hmm, I got confused by your first post stating Bootloader version 3.9 Modem firmware 03.14.08.

    The o2-UK iPhones came - as far as I remember - with 1.1.2 and Bootloader 4.6 plus matching Firmware.

    Are you sure it was an o2-UK-iPhone?

    It it had been 1.0.2 (so not beeing a o2-UK-iPhone) downgrading to 1.0.2 and virginizing could have helped...


    volkspost
    Read the stickies and search the forum before posting!
    If you want to become a Hackint0sh supporter click here
    ----------
    iPhone 4 factory unlocked, iOS 4.3.1, jailbroken
    iPad Wi-Fi + 3G (1G), iOS 4.3.1, jailbroken
    iPad 2

  9. #9
    Newbie Array

    Join Date
    May 2008
    Posts
    8
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    Quote Originally Posted by volkspost View Post
    Hmm, I got confused by your first post stating Bootloader version 3.9 Modem firmware 03.14.08.

    The o2-UK iPhones came - as far as I remember - with 1.1.2 and Bootloader 4.6 plus matching Firmware.

    Are you sure it was an o2-UK-iPhone?

    It it had been 1.0.2 (so not beeing a o2-UK-iPhone) downgrading to 1.0.2 and virginizing could have helped...


    volkspost
    I guess that was me playing around with the downgrading. I am sure it is a UK O2 phone though.. says so on the box and everything (and I am in the UK of course). Thanks for the replies though.. hopefully I'll figure it out.. eventually. The way it doesn't even let me make emergency calls is a little worrying though.

  10. #10
    Supporter/Apple CEO
    Newsreporter
    Array secretmrx's Avatar

    Join Date
    Feb 2008
    Location
    New Zealand
    Posts
    468
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    49

    Default

    if it is an o2 uk iphone virginization will not be necessary as that is only required for the very old anySIM or geohot hardware unlock.

    It seems that your baseband version matches that of the firmware (1.1.4)
    Normally people just have a mismatched baseband to the firmware, thus the baseband enters a brick state unless it is downgraded to a matching/lower version of the OS's firmware. you can run basebands that either match your iPhone's OS version, or one that is below it. but not above.

    il think about it and see what I can do.


 

 
Page 1 of 2 12 LastLast

Similar Threads

  1. Replies: 23
    Last Post: 06-03-2013, 12:43 PM
  2. [1.1.4 (1.1.1 OTB)] stuck in “no service”
    By porter2314 in forum iPhone "2G" (Rev. 1)
    Replies: 3
    Last Post: 05-28-2008, 04:18 PM
  3. Replies: 2
    Last Post: 02-11-2008, 10:00 PM
  4. 1.1.2 version downloadable?im stuck no service
    By pest1320 in forum General
    Replies: 1
    Last Post: 01-26-2008, 06:38 AM
  5. service providers sms gets me stuck
    By zineattitude in forum General
    Replies: 1
    Last Post: 09-13-2007, 08:33 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBulletin®
Copyright © 2014 vBulletin Solutions, Inc. All rights reserved.
Search Engine Friendly URLs by vBSEO
(c) 2006-2012 Hackint0sh.org
All times are GMT +2. The time now is 02:06 PM.
twitter, follow us!