Discuss [1.1.4] iPlus 2.0b - Unlock/Downgrade/Activate-Version B at the iPhone "2G" (Rev. 1) - Hackint0sh.org; Hi,
I have just successfully unlocked an iPhone with iplus 2.0b with absolutely no problems, ...
I have just successfully unlocked an iPhone with iplus 2.0b with absolutely no problems, now I'm just trying a second and I've hit problems!
The iPhone is stuck on pass 2, this is the message
iPlus 2.0b - pass 2 starting
No payload found to process
/private/var/mobile/media/payload/bin/reboot: no such file or directory
chmod: /sbin/reboot: no such file or directory
The iPhone will now reboot
iplus 2.0 - pass 2 completed
It's been stuck on this with the timer wheel going for ages now.
Any help appreciated
Last edited by omissimo; 03-15-2008 at 01:59 PM.
I deleted SSH. I never use it. I just use iFuntastic to upload, change plists, and delete stuff from the iPhone...
Originally Posted by jtesnani
As far as I know, different versions of iplus (1.2/2.0/2.0b) performance differently on each iphone.
Originally Posted by omissimo
The 2.0b works perfectly on your 1st iphone but not the 2nd one and it's not suprising at all!
I suggest that you either use 2.0 or 1.2 on your 2nd iphone. It may work.
Generally, if any of your iphone doesn't work on a particular version (after repeating several times using the same version), then try the other 2 versions even they are the older one. It may just do the trick!
Last edited by kevinti; 03-15-2008 at 03:49 PM.
-> iPhone 2G 1.1.1 (OTB)
-> iPhone 2G 1.1.2 (Anysim)
-> iPhone 2G 1.1.4 (iPlus2.0b)
-> iPhone 2G 2.0.1 (Winpwn 220.127.116.11)
-> iPhone 2G 2.0.2 (Quickpwn RC3 [1.51])
-> iPhone 2G 2.1.0 (WinQuickpwn 2.1)
Here is a video about how it looks unlocking with iplus 2.0b
Cool thanks, I ran it again and it worked fine.
Originally Posted by kevinti
Originally Posted by aviegas
I see the file in the iplus folder but how can i transfer it over to the iphone to replace the existing file>?
Hello fellow iPlus users!
After finally getting my phone today, and using the last few weeks on following this thread(iPlus 2.0b), and the iPlus 2.0 thread before it I started on my journey with jailbreaking/activating/unlocking my phone today. Unfortunatly I have run into a rather annoying problem. After completing a run with "./iplus -u" where the log didnt give any errors, the phone keeps saying "Sim locked". Here are the facts and what I did:
Phone: 1.1.3 OOB bought at an Apple Store in the UK (16GB Version)
iPlus: I used version 2.0b downloaded from the original post, earlier today.
Optional: I used the "international_payload.zip" renamed to "payload.zip"
Steps that I followed:
#1: Double checked with *3001#12345#* that it was indeed a 1.1.3 phone with the 04.03.13_G baseband version
#2: Put the phone into "DFU mode"
#3: Connected the phone to my mac mini (running OSX), and did a alt/option restore within iTunes to 1.1.4 downloaded directly from Apple. This completed fine, and I verified that it had updated the baseband to 04.04.05_G
#4: "Undocked" the iPhone from within iTunes, quit iTunes and killed "Itunes Helper" from the activity monitor.
#5: Unpacked iPlus2.0b.zip downloaded from **********, with the "Archive Utility", so this left me with a folder called "iPlus2.0" on my desktop
#6: Removed the original payload.zip, and put in the renamed "international_payload.zip" that is was called "payload.zip"
#7: Opened a terminal and went into /Desktop/iPlus2.0/
#8: Ran iplus with the following command "./iplus -u" (without the "" ofcourse)
#9: Waited for about 5 minutes, while iPlus did its thing, it rebooted twice as expected, and in the command prompt it said: that the process was complete. Enjoy your iPhone!
#10: Waited for the phone to boot, it came up with the Springboard info box, that I dismissed
#11: I then proceded to put in my own sim card from my local carrier, as soon as it was in the phone a box came up saying "SIM Locked", where I could either press "Ok"
or "Unlock", if I press "Unlock" it comes up with a box where I can enter a code to unloack the phone, that I ofcourse dont have.
From the iplus.log I noticed no errors about unlocking:
2008-03-15 16:41:09 +0100 Unlocking phone...
2008-03-15 16:41:10 +0100 Attempting unlock for BL3.9
2008-03-15 16:41:10 +0100 Please wait...
2008-03-15 16:41:11 +0100 Oops, bootloader 4.6 detected
2008-03-15 16:41:11 +0100 Downgrading bootloader to 3.9FB
2008-03-15 16:41:11 +0100 Please wait...
2008-03-15 16:42:47 +0100 Bootloader downgrade completed!
2008-03-15 16:42:47 +0100 Attempting unlock again
2008-03-15 16:42:47 +0100 Please wait...
2008-03-15 16:44:28 +0100 Unlocking completed
That was the first try, I have read a couple of threads saying that if it doesnt work the first time, then try to restore the phone again with iTunes back to 1.1.4, and then try to do it again. I did all the steps from #2-10 again. The reason why I didnt do #11 was that on my second try, I had my own sim card in the phone (I thought this might unlock the phone with "my sim card"). iPlus runs thru the process just fine once again, giving no errors etc. The phone boots, and immediatly it says "SIM Locked", with the "Ok" or "Unlock" option present again.
Again the log file says nothing about any problems with the unlock:
2008-03-15 09:09:42 -0700 Unlocking phone...
2008-03-15 09:09:42 -0700 Attempting unlock for BL3.9
2008-03-15 09:09:42 -0700 Please wait...
2008-03-15 09:11:23 -0700 Unlocking completed
So now I a 1.1.4 (4A102) baseband 04.04.05_G that says that my sim is locked, and I cant use it as a phone. This is my first ever unlock, where I tried to do as much preperation unfront reading 70+ pages on this forum before proceding.
I really hope one of you guys have some input as to what I can try from here, because I would ofcourse really love to use my iPhone as a phone, and not an Ipod Touch. What could be causing the unlock not to kick in?
Im sorry for the long post, but I thought that I would give as much information upfront as possible
i've unlocked otb 1.1.2(dfu+restore to 1.1.4) then ran iplus2.0b 2days ago with an orginal payload. evnerything went smoothly which is really great! just a few minutes ago my phone start acting weird . Full signal bar but i cant make a call, i tried to changed my sim carrier still nothing change. So I tried my sim with my Nokia guess what it works both calling and incoming call. Any possible solution or advise ?
I think your only problem is that your SIM is PIN locked. You must intro your four digits code, or deactivate your PIM request. Is more easy with your SIM unlocked (without PIM request) Excuse my horrible English...
Tried to reset all settings? Settings --> General --->Reset--> Reset All
By kwanbis in forum iPhone "2G" (Rev. 1)
Last Post: 04-02-2008, 07:53 PM
By nersooo in forum iPhone "2G" (Rev. 1)
Last Post: 03-28-2008, 03:46 AM
By aviegas in forum iPhone "2G" (Rev. 1)
Last Post: 03-15-2008, 05:50 AM
By geebee in forum iPhone "2G" (Rev. 1)
Last Post: 03-14-2008, 06:52 AM
Last Post: 10-09-2007, 01:37 AM