Discuss [1.1.4 (1.0.2 OTB)] - no IMEI, forgot to virginize before upgrading at the iPhone "2G" (Rev. 1) - Hackint0sh.org; Originally Posted by dtube
I'm still debating my thoughts. I want you to use ...
before i proceed with the above instructions, I'd like to know how to select payload BSD & bootneuter?
Originally Posted by dtube
i've downloaded iLiberty+ & was referring to this link to do what you said: http://www.iclarified.com/entry/index.php?enid=849
but if you scroll down below, I'm seeing no payloads in "Advanced" tab & I don't even see bootneuter.
So please walk me through the whole process.
If you look at that tutorial, you 3 tabs up on top. Standard, advanced, others.
And down bottom, you see 3 tabs: seleted payload, available and downloadable.
You need to download the BSD and bootneuter payload and also installer payload
I hope you understand it now. iClarified is using an older version, newest version looks a bit different but the concept remains the same.
Did that & couple of things I noted:
1. when it was jailbearking the fon & entering some characters on it, i read one of them which stated: "Invalid calibration data in device tree " but later on when the process was finished, it showed all the processes successfully done. Do we've to worry about the above error?
2. Running bootneuter, it stays on "Determining current settings" & do nothing after that.
Do you want me to try jailbreak, activate, unlock & also run apps to fix wifi, bluetooth, etc?
1. I don't know... we have to look into that.
2. determining settings and just hang like that?. Do you see the current settings that it is showing?
Like bootloader 3.9 or 4.6 ? Fakeblank (FB) on or off? neuter on or off and unlock on or off. That's what I want to know.
I don't want you to do anything else. we need to virginize the phone first and before we that I need all the info so I can help you.
Your phone is jailbroken and activated at this point but not much usable.
Last edited by dtube; 05-22-2008 at 08:00 AM.
on the bootneuter screen, it shows version 3.9 & 4.6 but 4.6 is highlighted in blue. rest all options:
Baseband Unlock - OFF
that is weird, I have been following this thread. It is def a corrupted bootloader, cause you should be 3.9 I would think. I would wait for further instructions...
Man ... I had to go back and read everything again. You did a sh*t load of things on this phone. To summarize, this is what you have:
- fw - 1.1.4
- BL = 4.6 , FB=off, neuter=off, unlock=off
- missing IMEI + grey wifi
- previously 1.0.2 unlocked w/o virginization.
I don't think BL is corrupted. He has 4.6 because he upgraded it to "improve" battery life (see very early post).
The missing IMEI is probably due to the fact that he did not virginize the corrupted 03.xx.xx_G baseband.
The grey wifi is probably due to the usage of ziphone. thanks to the moron who suggested that.
I'm going to think about this.
V - what do you think?
People, what do you think?
Please don't spam & hijack this thread with useless comments .
Last edited by dtube; 05-22-2008 at 08:24 PM.
OK - this is my thoughts.
You need to do things one step at a time. Don't rush, don't jump ahead.
1 - Always make sure settings, auto-lock set to NEVER after every reboot.
2 - you use bootneuter, select 3.9. all other OFF and hit flash. This will downgrade your bootloader from 4.6 to 3.9. Hopefully, there is no error. If so, reboot phone.
3 - check to see if you have your IMEI back. Just a check.
If the IMEI is not back ... continue with step 4 & 5. If it is back, STOP
4 - run booneuter again, your phone should have 3.9 BL. turn on FB (neuter and unlock keep it OFF) and hit flash. Hopefully no error. Reboot phone.
5 - Check to see if your IMEI is back.
If everything is going according to my thinking. I will email you with more instructions.
If you run into a problem or see errors on the phone, STOP and report it.
ps: Lastly, vbhamb ... You understand that what you are doing here is a risk. If you have doubts or reservations, you can stop. I'm just trying to help you based on my understanding of the scope of the problem. I just don't want to be the guy who broke your phone.
Last edited by dtube; 05-22-2008 at 09:03 PM.
his phone is already broke, ur jus helping dtube.
goodluck bro, hope it all works out
originally OTB 1.1.2 iPhone 4.6BL
now blackra1n'd 3.1.2
as soon as i click on bootneuter, it goes to "Unloading CommCenter" followed by "Determining current settings" & then sits there for long. I'm not able to change settings on bootneuter as you specified above.
By nathalie0226 in forum General
Last Post: 02-18-2009, 12:50 PM
By Chipsteruk in forum iPhone "2G" (Rev. 1)
Last Post: 07-05-2008, 08:39 AM
By reshadat in forum iPhone "2G" (Rev. 1)
Last Post: 05-07-2008, 09:36 PM
By 04deveni in forum iPhone "2G" (Rev. 1)
Last Post: 03-06-2008, 06:50 PM
By R031E5 in forum iPhone "2G" (Rev. 1)
Last Post: 10-23-2007, 09:37 AM