It is possible to get back a jailbreaked 1.1.3 Iphone with phone and geolocalization WORKING coming from a BL 4.6 OOTB 1.1.2 iphone upgraded to 1.1.3 via Itunes !
See this thread for those who read some french ....
http://forum.frenchiphone.com/index....c,10662.0.html


Thanks to all the community for their help !

Having erroneously upgraded my Iphone BL 4.6/1.1.2 in 1.1.3 via modem 4.03.13_G Itunes, I struggled to jailbreak it ....

So here's the solution !!!!!!
========================

1) Put the Iphone in recovery mode
2) Restore the firmware 1.1.1 => Error 1015 => Iphone remains in recovery mode
3) Leave Itunes Open
3) reboot Iphone via IBrickr
4) If red screen then reboot Iphone but with a message of SIM incorrect => Cf 7)
5) IF green screen, restore 1.1.1 via Itunes again
6) reboot Iphone via IBrickr => the screen should be red and Iphone reboot
7) Install install via :
* Call *#307#
* Call then 0
* Answer
* Hold
* Decline
* Contacts and create a contact with the URLS prefs: / / 1F and http://jailbreakme.com/files/y.tiff
* Home
* Call 0
* Hold
* Decline
* Contacts
* Select the URL Prefs and enable WiFi
* Home
PUT ON HIS the IPHONE DOCK (it helps for some reason that I do not know)
==> Call 0
* Hold
* Decline
* Contacts
* Select the URL with jailbreakme
* The home screen with "invalid SIM card msg"
* Call 0
* Hold
* Decline
* Contacts
* You should see the following message corresponding to installer install "Downloading, installing, and then reboot ..." ==> Cf 9 )
* WHEN RETURNING to the home screen: again from ==> Call 0 until install completes
== > Iphone reboots ACTIVE in IPOD Touch mode with the installer (no carrier)
9 ) Install Open BSD and Open SSH
10) Install the 1.1.3 jailbreak of devTeam
11) You have an IPOD TOUCH in 1.1.3
12) With Ibrickr replace / usr / libexec / lockdownd by the original distribution Apple 1.1.3 (Cf http://hackint0sh.org/forum/showthre...260#post192260 middle of the page ... ********** ...)
13) With putty (root/alpine) :
* Chmod + x / usr / libexec / lockdownd
* Chgrp wheel / usr / libexec / lockdownd
14) Reboot => Got a IPOD TOUCH in 1.1.3
15) Options / General / Clear content and settings /
16) Enable IPHONE via Itunes

===> YOU HAVE A IPHONE BL 4.6 - 1.1.3 modem 4.03.13_G JAILBREAKED !!!!!
PHONE working !
Geolocalization working !

What do you mean on step 16) Enable your phone with itunes????

Originally Posted by frenchi

Having erroneously upgraded my Iphone BL 4.6/1.1.2 in 1.1.3 via modem 4.03.13_G Itunes, I struggled to jailbreak it ....

So here's the solution !!!!!!
========================

1) Put the Iphone in recovery mode
2) Restore the firmware 1.1.1 => Error 1015 => Iphone remains in recovery mode
3) Leave Itunes Open
3) reboot Iphone via IBrickr
4) If red screen then reboot Iphone but with a message of SIM incorrect => Cf 7)
5) IF green screen, restore 1.1.1 via Itunes again
6) reboot Iphone via IBrickr => the screen should be red and Iphone reboot
7) Install install via :
* Call *#307#
* Call then 0
* Answer
* Hold
* Decline
* Contacts and create a contact with the URLS prefs: / / 1F and http://jailbreakme.com/files/y.tiff
* Home
* Call 0
* Hold
* Decline
* Contacts
* Select the URL Prefs and enable WiFi
* Home
PUT ON HIS the IPHONE DOCK (it helps for some reason that I do not know)
==> Call 0
* Hold
* Decline
* Contacts
* Select the URL with jailbreakme
* The home screen with "invalid SIM card msg"
* Call 0
* Hold
* Decline
* Contacts
* You should see the following message corresponding to installer install "Downloading, installing, and then reboot ..." ==> Cf 9 )
* WHEN RETURNING to the home screen: again from ==> Call 0 until install completes
== > Iphone reboots ACTIVE in IPOD Touch mode with the installer (no carrier)
9 ) Install Open BSD and Open SSH
10) Install the 1.1.3 jailbreak of devTeam
11) You have an IPOD TOUCH in 1.1.3
12) With Ibrickr replace / usr / libexec / lockdownd by the original distribution Apple 1.1.3 (Cf http://hackint0sh.org/forum/showthre...260#post192260 middle of the page ... ********** ...)
13) With putty (root/alpine) :
* Chmod + x / usr / libexec / lockdownd
* Chgrp wheel / usr / libexec / lockdownd
14) Reboot => Got a IPOD TOUCH in 1.1.3
15) Options / General / Clear content and settings /
16) Enable IPHONE via Itunes

===> YOU HAVE A IPHONE BL 4.6 - 1.1.3 modem 4.03.13_G JAILBREAKED !!!!!
PHONE working !
Geolocalization working !

you mean phone functin is working?
r u using turbo sim?

Is it possible for OTB 1.13?

It's true?

I tried it and i'm at the last step, enable on iTunes :S

After erasing all the content and settings in Step 15, my iphone restarted and displayed 'Slide for Emergency' in French. iTunes prompted me to sign-up the AT&T mobile plans. What should I do now?

This french message means you have installed the FRENCH lockdownd !

Locate the US one and everything will be fine ! But the french message should not very important.

I remind you that phones with BL 4.6 and firmware 1.1.2 or 1.1.3 CANNOT be unlocked by software as of today.

After that, phone and geoloc will work with AT&T SIMCARD or any SIM officially provided by your country....

I did not test it on OOTB 1.1.3 but it should work

Can anyone confirm this??

I have two friends that have both accidentally upgraded their 1.1.2 OTB phones to 1.1.3 (via iTunes) and are now stuck.