Page 1 of 39 123456789101121 ... LastLast
Results 1 to 10 of 383
Discuss [1.1.3] Confirmed complete jailbreak AND unlock method (software AND baseband) at the iPhone "2G" (Rev. 1) - Hackint0sh.org; My baseband trick worked 100% with 1.1.3 Now I have 1.1.3 BL 3.9 with latest ...
  1. #1
    Professional Array

    Join Date
    Jan 2008
    Posts
    60
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    10

    Thumbs up [1.1.3] 4_03_14G unlocked (previous IPSF)

    My baseband trick worked 100% with 1.1.3

    Now I have

    1.1.3
    BL 3.9
    with latest baseband
    unlocked totally

    google localization and everything working fine.

    Offcourse mine was unlocked before with IPSF

    Whenever you change sim or reboot you need to do it again.

    1. All IPSF unlocked phones can do this.
    2. Other unlocked iphones can also try this


    Baseband trick


    1. unload comm centre

    2.in minicom
    AT+CLCK="PN",0,"00000000" press enter
    OK
    AT+CLCK="PN",2

    If it returns 0 then your phone has survived this upgrade and you are going to get signal and unlock status back.

    3. Launch comm centre, few seconds signal back and sim unlocked again.

    Note: please read the baseband as 4_03_13G ( wrong in the title)

    screenshot

    http://i262.photobucket.com/albums/ii106/kayo_k/1.jpg


    Quote Originally Posted by slimnickyy View Post
    I knew that'd get your attention. Yes, it's true, there is a way to have a completely software unlocked iPhone (BL 3.9 phones). This includes the 1.1.3 baseband, meaning google maps locations works! And yes, you can use whatever sim you want (it's unlocked).

    The catch? Well, (ducks for cover) it only works (as of now) on phones that are unlocked with IPSF (and of course phones using legit carriers). Also, the phone loses its signal when you swap Sims or reboot. However you can still use any carrier's sim, and it's rather easy to re-acquire the signal (it only requires a couple of scripts to be ran on minicom).

    The good news is however, that this means it's quite likely for an updated AnySim for 1.1.3's baseband to be done. Therefore open source community, get to work!

    Below is a overview of what was done. However, I have one wish that I request from the community: Anyone with some scripting knowledge, could you please whip up a script that can be saved on the iPhone's homescreen (as an app maybe) that runs these commands:

    1. # launchctl unload -w /System/Library/LaunchDaemons/com.apple.CommCenter.plist
    2. # minicom
    3. AT+CLCK="PN",0,"00000000"
    4. AT+CLCK="PN",2
    5. launchctl load -w /System/Library/LaunchDaemons/com.apple.CommCenter.plist


    Essentially those are the commands that need re-entered via terminal, putty, or even through Term-vt100 on the iPhone itself to re-acquire your signal. Once the last command is entered into the phone the signal comes back within seconds. Thus if this were a script that could be run on the phone itself (instead of typing it in manually), this would mean that whenever you swap Sims you could simply run it and be on your way within a minute, versus do it manually which takes longer. So please, anyone with scripting knowledge that could get this to run on the phone, with Term-vt100 or whatever, please do so and if you require a beta tester PM me.

    Now on to the good stuff. I wish to note that anyone using AT&T or o2 of T-Mo in Germany or Orange in France can do this same method to achieve a complete 1.1.3 that is also jailbroken.

    How I did it:

    I wish to thank those who created the guides used below!

    First, remember that my phone was at 1.1.2 and was unlocked with IPSF back when it was at 1.02. Therefore anyone with an IPSF unlocked phone (or official phone on 3.9) can do this without worry. Even if you do end up regretting the baseband upgrade to 1.1.3, there is a way to downgrade back. So this carries little risk. An updated AnySim for 1.1.3 should work similarly.

    1. Upgrade your IPSF unlocked iPhone with iTunes to 1.1.3
    2. Downgrade phone using 1.1.1 firmware via iTunes
    3. iTunes restores, but gives an error. Just hit okay and close out iTunes.

    4. Mac uses, download independence 1.3 beta 2
    5. Windows users, download iBricker

    6. Depending on your OS, launch either program from above to get phone out of recovery mode (wait a minute or two after launching, no action needed)

    7. iPhone should wake up and show 'activate iphone, connect to iTunes, slide to unlock' on its screen. IPSF users: it will also complain about an invalid Sim, just press okay on the screen, it's no big deal.

    8. Now jailbreak/activate using the *#307# method and jailbreakme.com to jailbreak.

    NOTE: This guide is well illustrated and shows how to jailbreak, AND it also explains how to downgrade your baseband from 1.1.3 if for some reason you wished to do so.

    9. Now you should have a jailbroken and activated iPhone on 1.1.1 with 1.1.3 baseband and installer.app on your screen. When you launch installer it will ask to update. I do not recommend updating it at this point because updating it seems to remove OpenSSH which is something you will need to have installed. Alternatively independence 1.3 can be used on Macs to install SSH (that's what I did in the end).

    Regardless of the method you use, ensure that BSD subsystem and SSH are installed.

    10. Now it's time to do nate's 1.1.3 jailbreak. Download the appropriate packages depending on your OS from his site and run them. (iClarified has nice step by step guides for Mac and Windows).

    11. After your phone is prepped with the files from nate's package, follow his instructions and open installer.app and install the 1.1.3 soft update. (again, see iclarified.com if you need info).

    12. After the soft update is done you should now have a jailbroken and activated iPhone with 1.1.3 firmware and baseband, but still no signal (unless you're on a legit iPhone contract). It seems the update breaks SSH, but to fix it simply go into installer.app (again hold off on updating for now) and go to the "uninstall" tab and choose BSD Subsystem and hit the reinstall button in the right corner. Once this is completed, SSH should work fine. Note the root and password are same from 1.1.2.

    13. This is the final part; getting your signal back. This post gives full details on how to do it. Windows users use putty, Mac OS X users should be able to use the built in SSH capabilities in terminal (worked for me on 10.5.1).

    After completing these instructions the phone should work fine, unless you reboot or swap sims and then you'll need to run through the minicom lines again. This could be made an issue of the past if someone could program a script that could be launched from the home screen of the iPhone. If someone needs me to beta test such a script, PM me!
    Last edited by Number_41; 01-25-2008 at 06:44 PM. Reason: added screen shot



  2. #2
    Newbie Array

    Join Date
    May 2006
    Posts
    6
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    I can confirm this works! Tx, Kayokid!!

    google localization even works in the netherlans!

  3. #3
    Senior Professional Array

    Join Date
    Oct 2007
    Posts
    206
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    17

    Default

    how was your phone unlocked? IPSF? or anySim?

    Lighter

    Quote Originally Posted by xone View Post
    I can confirm this works! Tx, Kayokid!!

    google localization even works in the netherlans!

  4. #4
    Advanced Array

    Join Date
    Aug 2007
    Posts
    43
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    Could you elaborate? Minicom has always confused me. If you could hint to what commands I ought to type in that would be great...

  5. #5
    Senior Professional Array

    Join Date
    Sep 2007
    Posts
    146
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    15

    Default

    please elaborate on this if possible and give a guide
    so did you just simply upgrade to 1.1.3 via iTunes then run this?
    Please explain how to initiate the minicom commands


  6. #6
    Professional Array

    Join Date
    Jan 2008
    Posts
    60
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    10

    Default

    Quote Originally Posted by lighter View Post
    how was your phone unlocked? IPSF? or anySim?

    Lighter
    Mine was IPSF.

    Even if it is not IPSF please check if you have used any sim.

    Also check in previously never unlocked phones also.

  7. #7
    Professional Array

    Join Date
    Jan 2008
    Posts
    60
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    10

    Default

    Quote Originally Posted by mongoose8p View Post
    please elaborate on this if possible and give a guide
    so did you just simply upgrade to 1.1.3 via iTunes then run this?
    Please explain how to initiate the minicom commands
    Guide

    1. follow the same steps to jailbreak 1.1.3
    2. Download bsd and ssh through installer
    3. setup minicom

    Start putty and login.
    - type : minicom -s
    - select serial port setup and type : A.
    - enter: /dev/tty.baseband Enter
    - press esc
    - select save setup as dfl
    - Exit

    4. unload comm centre

    # launchctl unload -w /System/Library/LaunchDaemons/com.apple.CommCenter.plist


    5. launch minicom

    # minicom

    Welcome to minicom 2.2

    OPTIONS:
    Compiled on Jul 21 2007, 05:09:51.
    Port /dev/tty.baseband

    Press CTRL-A Z for help on special keys

    AT S7=45 S0=0 L1 V1 X4 &c1 E1 Q0
    OK

    then Type

    AT+CLCK="PN",0,"00000000" press enter
    OK
    AT+CLCK="PN",2 press enter
    +CLCK: 0

    OK

    The above response means already unlocked

    6. launch comm centre

    launchctl load -w /System/Library/LaunchDaemons/com.apple.CommCenter.plist


    Few seconds later signal is back


    7. same steps needed to be done every time you change the sim or reboot. A small app which runs the above commands from springboard greatly enhances the process. Just a click phone will start functioning.




    Some how the baseband gives this following response when an actual call is made , after we elicit the minicom response. Probably this resposne is stored for that session


    AT+XSIMSTATE=1
    +XSIM: 2

    +XLOCK: "PN",5,0

    ( fully unlocked ).
    Last edited by kayokid; 01-25-2008 at 06:17 AM.

  8. #8
    Senior Professional Array

    Join Date
    Sep 2007
    Posts
    146
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    15

    Default

    Quote Originally Posted by kayokid View Post
    Guide

    1. follow the same steps to jailbreak 1.1.3
    2. Download bsd and ssh through installer
    3. setup minicom

    a) log in shh
    b)configure minicom first
    thanks for clarifying ...
    what do u mean by setup/configuring minicom thats all i need help with

  9. #9
    Senior Professional Array

    Join Date
    Nov 2007
    Posts
    120
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    13

    Default

    Good stuff
    iPhone 8GB
    Great Music player but can only hold 1000 songs
    Need an iPhone that can hold my >100,000 songs :p
    I'm still dreaming.

  10. #10
    Professional Array

    Join Date
    Jan 2008
    Posts
    60
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    10

    Default

    Quote Originally Posted by mongoose8p View Post
    thanks for clarifying ...
    what do u mean by setup/configuring minicom thats all i need help with
    please see the post I edited half, now it is complete


 

 
Page 1 of 39 123456789101121 ... LastLast

Similar Threads

  1. Replies: 4
    Last Post: 01-16-2008, 07:53 PM
  2. Replies: 65
    Last Post: 01-15-2008, 12:03 AM
  3. Is that a sim unlock method via baseband downgrading or am I wrong?
    By georgis333 in forum iPhone "2G" (Rev. 1)
    Replies: 2
    Last Post: 12-21-2007, 04:54 AM
  4. Confirmed software unlock in Israel
    By sand372 in forum General
    Replies: 0
    Last Post: 09-12-2007, 09:30 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBulletin®
Copyright © 2014 vBulletin Solutions, Inc. All rights reserved.
Search Engine Friendly URLs by vBSEO
(c) 2006-2012 Hackint0sh.org
All times are GMT +2. The time now is 01:33 PM.
twitter, follow us!