Page 1 of 3 123 LastLast
Results 1 to 10 of 30
Discuss [1.1.2OTB GUIDE]**How to fix And Geounlock Problems, And some TIPS!!! at the iPhone "2G" (Rev. 1) - Hackint0sh.org; Ok, I don’t really know if this guide will help you out. So do it ...
  1. #1
    Respected Professional Array abrasBR's Avatar

    Join Date
    Sep 2007
    Location
    Belo Horizonte, Brasil
    Posts
    508
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    33

    Default [1.1.2OTB GUIDE]**How to fix And Geounlock Problems, And some TIPS!!!

    Ok, I don’t really know if this guide will help you out. So do it at your own risk. This is for Bootloader 4.6
    This should help if you have bricked your phone in other way too.

    Ok, first off all, despite all of the problems GeoHot did an unbelievable job. I had a problem but I think it was cause I didn’t paid so much attention, and kind of freaked out when it crashed. So thanks a lot GeoHot for everything.

    My problem was that I tried the manual version of the unlock. I downloaded the files through installer and used terminal to send the commands. When I did :
    ./gunlock secpack ICE04.02.13_G.fls my phone crashed. (this time it was on airplane mode, so I don’t really know why it crashed).
    So when I restarted my iPhone, I always end up at Recovery screen.

    So, to fix this problem or similar problem, this is what I did.

    1 – Download itunes 7.6 at apple.com

    2 – Download 1.1.3ispw. You can download it through itunes.

    3 – Put your iphone into restore mode, (what I think it already is). If it isn’t, just press power button + home button together, until you see the cable and itunes logo.

    4 – Open iTunes and click Restore. (Don’t need to hold shift since iTunes will get 1.1.3 from their server, but if you already have, then press Shift + Restore and select it, so you don’t need to download it all over again).

    5 – After restoring, youll have an 1.1.3 WORKING iPhone.

    6 – Download DFU - www.send$pace.com/file/93fx93 (change $ to s)

    7 – Extract DFU folder to C:/

    8 – Go to the start menu and click Run, and type the following:
    c:/dfu/dfu iBSS.m68ap.RELEASE.dfu
    Now hit OK, this will force your iphone into DFU mode. Now it should have a with screen.

    9 – Now click shift restore on itunes and Select 1.1.1 file. (I did this restore twice, so its up to you.) Now itunes will say that your iphone is in recovery mode. Press OK.

    10 – Get ibrickr 0.91, and press Boot the phone. The background of your iphone should turn red, and then boot up. If ibrickr doesn’t work, use 1.1.2 jailbreak.zip (Google it, and you should find) and press boot from recovery.

    11 – Now unlock your iphone with *#307# method. I prefer i.unlock.no instead of jailbreakme.com. But this is up to you guys.

    12 – After jailbreaking 1.1.1 install oktoprep.

    13 – Now open itunes again, and click shift+UPDATE (not restore, UPDATE), and select 1.1.2 file.

    14 – Now you should have a locked 1.1.2 iphone. If your iphone stay on recovery screen after the update, use 1.1.2jailbreak to boot from recovery.

    15 – Now you have a 1.1.2 jailbreaked and working.

    16 – Set auto-lock to never.

    17 – Open installer, and add http://installer.iClarified.co.

    18 – Install BSD subsystem under System category.

    19 – Install GeoHot Unlock under iClarified category.

    20 – Press ok, and it will begin the installation. If it crash in the middle, that’s ok, just wait 5-10minutes and it should reboot.(If it don’t, then start all over again).

    21 – After rebooting, IF you have no signal, follow the other steps.

    22 - You have to use BRICKTOOL now to have signal .

    23 – Download bricktool www.send$pace.com/file/e0tpu9 (change $ to s)

    24 – Using winscp copy this 3 files to /USR/BIN and change their permissions to 0755

    25 – Install terminal from installer on your iphone, and then type

    cd /usr/bin
    bricktool d


    26 – Reboot you phone, and you should have an 1.1.2OTB or (1.1.3OTB) working with your Simcard.

    If you liked this tuto, or got an unlocked 1.1.2OTB donate to who really diserves.
    http://iphonejtag.blogspot.com/
    Thanks a lot GeoHot.
    Last edited by abrasBR; 02-25-2008 at 05:03 AM. Reason: adding if statement



  2. #2
    Newbie Array

    Join Date
    Feb 2008
    Posts
    4
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    when u jailbreak with *#307# method u have 04.03.13 baseband?

  3. #3
    Newbie Array

    Join Date
    Dec 2007
    Posts
    4
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    hey man thanks alot! everything you said worked...
    but i got confused on the last 2 steps...
    1. how to "change their permissions to 0755"
    2. "Install terminal on your iphone" how do you do that... i dont understand the whole step #24....
    please get back
    thanks!!!!

  4. #4
    Respected Professional Array madrich's Avatar

    Join Date
    Sep 2007
    Location
    Chicago: Home of the Spire!
    Posts
    578
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    37

    Default

    Quote Originally Posted by JkhanC1 View Post
    hey man thanks alot! everything you said worked...
    but i got confused on the last 2 steps...
    1. how to "change their permissions to 0755"
    2. "Install terminal on your iphone" how do you do that... i dont understand the whole step #24....
    please get back
    thanks!!!!
    Search fourm regarding winscp. It's a utility program with a dual screen for PC Windows. It will allow you to transfer files from your PC to the iPhone itself.

    You install the terminal from the Installer that you should have on you iPhone from the previous hacking steps.

    But, I do not understand how you can say it worked, when you obviously have not done all the steps??
    Last edited by madrich; 02-09-2008 at 03:21 AM.
    Gort! Klaatu barada nikto!
    iPhone 2G with FW 3.1 and no MMS

  5. #5
    Newbie Array

    Join Date
    Dec 2007
    Posts
    4
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    Quote Originally Posted by madrich View Post
    Search fourm regarding winscp. It's a utility program with a dual screen for PC Windows. It will allow you to transfer files from your PC to the iPhone itself.
    thanks for the quick reply... i was able to transfer the files but is that it? cuz i transfered the 3 files but it still gave me no signal...
    it seemed like i had to do more than just transfer the file...


  6. #6
    Respected Professional Array madrich's Avatar

    Join Date
    Sep 2007
    Location
    Chicago: Home of the Spire!
    Posts
    578
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    37

    Default

    Quote Originally Posted by JkhanC1 View Post
    thanks for the quick reply... i was able to transfer the files but is that it? cuz i transfered the 3 files but it still gave me no signal...
    it seemed like i had to do more than just transfer the file...
    After you transfer the files you use the terminal to run the bricktool. Make sure you put the files in the right directory on the iPhone.
    Gort! Klaatu barada nikto!
    iPhone 2G with FW 3.1 and no MMS

  7. #7
    Newbie Array

    Join Date
    Dec 2007
    Posts
    4
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    nice!
    http://www.hackint0sh.org/forum/show...stall+terminal
    that helped alot
    and thanks for your help madrich!!!

    Thank You!!!

  8. #8
    Respected Professional Array abrasBR's Avatar

    Join Date
    Sep 2007
    Location
    Belo Horizonte, Brasil
    Posts
    508
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    33

    Default

    Quote Originally Posted by fomy View Post
    when u jailbreak with *#307# method u have 04.03.13 baseband?
    Yes. You will do everything but with baseband 04.03.13_G

  9. #9
    Newbie Array

    Join Date
    Jan 2008
    Posts
    2
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    By mistake i ran the installer app in 1.1.1 after reboot was still blocked, then i install oktoprep then update to 1.1.2 and now showed me mi carrier logo installed iworld everything is working properly

  10. #10
    Rookie Array

    Join Date
    Oct 2007
    Posts
    22
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    why do I have to upgrade to 1.1.3 first? can I just do the downgrade from 1.1.2??


 

 
Page 1 of 3 123 LastLast

Similar Threads

  1. Replies: 1
    Last Post: 02-18-2008, 06:51 PM
  2. [1.1.3][1.1.2OTB][Problems] SMS Time problem, someone fix it?
    By diealive in forum iPhone "2G" (Rev. 1)
    Replies: 2
    Last Post: 02-11-2008, 04:59 PM
  3. [1.1.2OTB GeoUnlock] HUGE PROBLEM!PLEASE HELP
    By abrasBR in forum iPhone "2G" (Rev. 1)
    Replies: 30
    Last Post: 02-10-2008, 04:40 PM
  4. Replies: 0
    Last Post: 12-25-2007, 08:58 PM
  5. Replies: 0
    Last Post: 10-26-2007, 09:34 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBulletin®
Copyright © 2014 vBulletin Solutions, Inc. All rights reserved.
Search Engine Friendly URLs by vBSEO
(c) 2006-2012 Hackint0sh.org
All times are GMT +2. The time now is 03:47 PM.
twitter, follow us!