Discuss [1.1.2 OTB] "Repair needed" no IMEI/BB/WIFI, CANNOT even restore at the iPhone "2G" (Rev. 1) - Hackint0sh.org; So i finally decided to do a HW unlock on OTB 1.1.2
the baseband some ...
[1.1.2 OTB] "Repair needed" no IMEI/BB/WIFI, CANNOT even restore
So i finally decided to do a HW unlock on OTB 1.1.2
the baseband some how messed up(I think during the ienew part). So I have no baseband now. no IMEI, and of course not WIFI.
when I connect to itunes, I get the "repair needed" msg.
the weird thing is, I couldnt restore to 1.0.2, itunes stucks in "waiting for iphone"
restoring to 1.1.1 or 1.1.2 did not fix the no BB problem.
so I guess i have to jailbreak 1.1.1 again and how can I mannual upload the baseband file w/o wifi?
Sorry for my English.
You must downgrade to 1.0.2 with Ibrick. Let restore ITunes your Phone. After that you must Jailbreak whit Ibrick and aktivate. If you have done that install the PXL Deamon from Ibrick. Download my Package an install BSDSubsystem vTerm and BBtools. Open vTerm an execute this comands:
chmod -R 777 /usr/bin/bbtools
chmod +x /usr/bin/bbtools/*
Now let erasing the Baseband.
Execute this command whitout connect the testpoint:
If the tool tell you that you shoult connect the testpoint is ok an now you should connect the testpoint's and reexecute the command.
continue whit the rest of the tutorial
I hope this will help you.
Last edited by ZeroOne_; 01-28-2008 at 02:58 PM.
It happened to me sth very similar. i had a 1.1.2 OOB firmware 04.02.13_G and after upgrade to 1.1.3 i had no IMEI and no BB/WIFI, and it shown Repair needed.
You also can do:
1)download IPhuc http://**********.com/files/84214672/iPhuc.zip
2)follow the below steps
3. Unpack & start iPhuc.exe
4. Type in “enterrecovery” and wait until iPhone enters Recoverymode (Notice be sure you are on iTunes 7.5 and its running while doing this tut!)
5. iPhuc window should say: #:
(If not, restart iphuc.exe)
6. Type in “filecopytophone WTF.s5l8900xall.RELEASE.dfu”
7. Type “cmd go”
8. Wait until iPhone Screen turns white and iTunes recognizes a device connected to it
9. Hold down shift + restore -> choose FW 1.1.2 -> let it finish -> do the same and choose 1.1.1 fw
10. Use iBrickr to kick the phone out of the DFU and go on as usual
Can i use with 1.1.2 OTB? I'm up to 1.1.3& BB 4.03.13_G.
Originally Posted by fariadoca
Ihis solution can down BaseBand for bootloader4.6 ?
Last edited by fariadoca; 01-28-2008 at 04:01 PM.
the problem is that you don't have the sec file from 1.1.4 to upgrade or downrage the baseband. Downgrade from 1.1.3 is not possible. Don't update!
If you have the 3.9 Bootloader is posible to downgrade but the 1.1.2 OOTB have all the 4.6 Bottloader
not working for me
Originally Posted by fariadoca
first, I can use iphuc to get in the recovery mode
I used the home+power then home trick and excuted the command, I get a msg says usb device not recognized.....
ُSearch for "no imei after testpoint".
i have the same problem...and i try the tutorial from fariadoca
and in step 9. it say that an unknown error (9) why??
i try'ing with iPhone1,1_1.1.2_3B48b_Restore.zip and then i get the error (9) or (2005)...
and when i try with ibrickr_v0.91.zip i turn red...and that mean that i must restore via itunes...but with itunes i get error ...
By jenn in forum iPhone "2G" (Rev. 1)
Last Post: 06-15-2010, 10:42 AM
By vally in forum iPhone "2G" (Rev. 1)
Last Post: 01-25-2008, 06:39 AM
By ogs1 in forum iPhone "2G" (Rev. 1)
Last Post: 12-13-2007, 08:28 PM
By max9241 in forum iPhone "2G" (Rev. 1)
Last Post: 11-11-2007, 05:12 PM
By invisibleman in forum iPhone "2G" (Rev. 1)
Last Post: 11-01-2007, 01:55 AM