Page 1 of 2 12 LastLast
Results 1 to 10 of 14
Discuss [1.1.2 OTB] Gunlocked, got signal, can't make calls at the iPhone "2G" (Rev. 1) - Hackint0sh.org; hi all i have an iphone FW 1.1.2OTB, week 46, here are the steps how ...
  1. #1
    Professional Array

    Join Date
    Jan 2008
    Posts
    55
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    9

    Default [1.1.2 OTB] Gunlocked, got signal, can't make calls

    hi all
    i have an iphone FW 1.1.2OTB, week 46, here are the steps how i activated, jailbreak and unlock.
    i follow this thread http://www.hackint0sh.org/forum/show...074#post220074 to unlock my phone.
    downgrade to 1.1.1, activated, jailbreak and unlock using 1.1.2-1.1.3 G-unlock from installer. after that i install OKTOPREP, then upgrade to 1.1.2 and jailbreak.
    everthing seem to works fine, i got service and signal bar, by the way i'm using T-Mobile (USA) however i can't make call or send message. everytime i dial, it just hung up by it self. i got frustrated, so i went ahead and install Appsupport 1.1.2. still doesn't do any good. i even install Bricktool/Signalfix, but the weird thing is after i install bricktoll/signalfix, i lost all my signal, so i went into installer and uninstall bricktool/signalfix and turn off my phone and post this thread , wainting for a reply. DOES ANYBODY KNOW WHAT'S MY PROBLEM IS? AN SUGGESTION WILL BE HELPFUL



  2. #2
    Rookie Array

    Join Date
    Mar 2008
    Posts
    20
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    Restore iPhone to 1.1.1 jailbreak, oktoprep, g-unlock, and don't forget to install bsd subsystem in 1.1.1 and then upgrade to 1.1.2 and then use touch free jailbreak from dev team not ziphone to jailbreak and activate , ziphone is only good if you have 1.1.3 or 1.1.4 NOT 1.1.2 look around for "touch free jailbreak 1.1.2 " use this jailbreak method after you use oktoprep and all other stuff and after your in 1.1.2

    It work for me but the bad thing after using the g-unlock is you will NEVER be able to goto 1.1.3 or above

  3. #3
    Administrator Array

    Join Date
    Oct 2007
    Posts
    4,145
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    10

    Default

    Quote Originally Posted by hobo14 View Post
    It work for me but the bad thing after using the g-unlock is you will NEVER be able to goto 1.1.3 or above
    Why is that?
    gunlock does not prevent you to go beyond 1.1.2 ...
    Last edited by dtube; 03-07-2008 at 07:07 PM.

  4. #4
    Senior Professional Array

    Join Date
    Jan 2008
    Location
    Houston,TX
    Posts
    424
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    29

    Default

    Quote Originally Posted by hobo14 View Post
    It work for me but the bad thing after using the g-unlock is you will NEVER be able to goto 1.1.3 or above
    Hmmmmmmmm...........................
    First ever Apple product I bought : iPhone.

  5. #5
    Administrator Array

    Join Date
    Oct 2007
    Posts
    4,145
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    10

    Default

    @vi3tnam66,
    It's hard for me to follow your post, too hard to read...
    Suggestion:

    if you want to stay at 1.1.2, repeat the process so you have a clean phone. When done, try calling and sms again to see if the same problem arise. This dialpad and sms problem exist in 1.1.2 but only when you use it in foreign countries. I have yet to see a problem report with Tmobile USA


  6. #6
    Professional Array

    Join Date
    Jan 2008
    Posts
    55
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    9

    Default

    if you want to stay at 1.1.2, repeat the process so you have a clean phone. When done, try calling and sms again to see if the same problem arise. This dialpad and sms problem exist in 1.1.2 but only when you use it in foreign countries. I have yet to see a problem report with Tmobile USA[/QUOTE]

    which process do i need to repeat? do you mean that i have to activated, jailbreak, and unlock all over again? if so, this is my 6th times trying to unlock this phone. i've tried so many different methods already. i even try with the NEXTSIM v3 when its first come out. As of now NO LUCK. i don't know what to do. HELP

  7. #7
    Rookie Array

    Join Date
    Mar 2008
    Posts
    20
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    Geos Gunlock Modifies your bootloader , if you install terminal on iphone and then type in
    bbupdater -v
    it will display somthing like this

    http://farm3.static.flickr.com/2041/...a0d14f7d00.jpg

    just before DONE it says Bootloader : if you did this AFTER geos unlock is installed it will say Bootloader: 4.6_Geomod this means it is a modified bootloader

  8. #8
    Administrator Array

    Join Date
    Oct 2007
    Posts
    4,145
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    10

    Default

    Quote Originally Posted by vi3tnam66 View Post
    which process do i need to repeat? do you mean that i have to activated, jailbreak, and unlock all over again? if so, this is my 6th times trying to unlock this phone. i've tried so many different methods already. i even try with the NEXTSIM v3 when its first come out. As of now NO LUCK. i don't know what to do. HELP
    What i meant is to restore your phone to 1.1.2 so you have clean phone then you follow the guide for 1.1.1 OTB unlock to jailbreak, activate and unlock.
    Look at iclarified.com for the tutorial.

  9. #9
    Administrator Array

    Join Date
    Oct 2007
    Posts
    4,145
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    10

    Default

    Quote Originally Posted by hobo14 View Post
    Geos Gunlock Modifies your bootloader , if you install terminal on iphone and then type in
    bbupdater -v
    it will display somthing like this

    http://farm3.static.flickr.com/2041/...a0d14f7d00.jpg

    just before DONE it says Bootloader : if you did this AFTER geos unlock is installed it will say Bootloader: 4.6_Geomod this means it is a modified bootloader
    What are you talking about?
    Gunlock does not modifies your bootloader.

  10. #10
    Professional Array

    Join Date
    Jan 2008
    Posts
    55
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    9

    Default

    Quote Originally Posted by dtube View Post
    What i meant is to restore your phone to 1.1.2 so you have clean phone then you follow the guide for 1.1.1 OTB unlock to jailbreak, activate and unlock.
    Look at iclarified.com for the tutorial.
    hi
    i just did everything all over again today, still have the same problem. can not make call. i follow the exact instruction from iClarified. i don't know what going on....very frustrated


 

 
Page 1 of 2 12 LastLast

Similar Threads

  1. In coming calls ok sms ok both ways. signal dead on out gpoing calls
    By techtexas in forum Yellowsn0w (3G unlock)
    Replies: 2
    Last Post: 01-04-2009, 02:42 AM
  2. NextSIM on UK 1.1.2OTB: Just one signal bar, no phone calls possible
    By waldeis in forum Turbo-, Supersim and Simcloning Solution
    Replies: 2
    Last Post: 02-11-2008, 11:46 PM
  3. Replies: 0
    Last Post: 01-30-2008, 06:04 PM
  4. Replies: 1
    Last Post: 11-29-2007, 04:00 PM
  5. Replies: 3
    Last Post: 09-25-2007, 12:46 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBulletin®
Copyright © 2014 vBulletin Solutions, Inc. All rights reserved.
Search Engine Friendly URLs by vBSEO
(c) 2006-2012 Hackint0sh.org
All times are GMT +2. The time now is 12:24 PM.
twitter, follow us!