Results 1 to 8 of 8
Discuss [1.1.1 OTB 3.9BL] Needs advice on where to go for 1.1.3 jailbreak + unlock at the iPhone "2G" (Rev. 1) - Hackint0sh.org; Hey everyone! Been out of the scene for a while now I see all these ...
  1. #1
    Newbie Array

    Join Date
    Oct 2007
    Posts
    6
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default [1.1.1 OTB 3.9BL] Needs advice on where to go for 1.1.3 jailbreak + unlock

    Hey everyone!

    Been out of the scene for a while now I see all these guides for 1.1.3 with boot loaders 4.6.

    I have an OTB 1.1.1 with BL 3.9 week 42 iPhone I unlocked it with anysim 1.1 and kept it like that ever since. I would consider myself knowledgeable when it comes to winSCP/putty/unix commands and so forth.

    There's just way too much questions and answers when I try using search.

    My question is what's the best method for someone with an OTB 1.1.1 BL3.9 to get 1.1.3 with everything working.

    any side effects? example unable to find signal...unable to use google locate me...things don't work after reboot and so on...

    any reply would be apprectiated!
    Last edited by 416_guy; 02-13-2008 at 09:30 AM.



  2. #2
    me.
    me. is offline
    Senior Professional Array me.'s Avatar

    Join Date
    Oct 2007
    Posts
    405
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    28

    Default

    Your best bet is Ziphone. Check zibri's blog and download it. Then sync your data, restore your phone to 1.1.3 and use the updated version of his ziphone to activate and jailbreak it. It's very easy. Then install BSD subsystem, AnySim 1.3 and unlock it. You'll be on 4.03 modem with 1.1.3 FW. No post-reboot signal issues reported. You can also upgrade to 1.1.3 instead of restoring, keeping your data, but restore seems the safest way... There's lot of info on ziphone here.. Just do NOT unlock with ziphone, it doesn't work for 3.9bl.
    There's also a GUI from i.unlock.no based on ziphone if you don't like typing simple commands, but I don't know if its ziphone base is updated to the latest version.
    Last edited by me.; 02-13-2008 at 09:38 AM.

  3. #3
    Professional Array

    Join Date
    Sep 2007
    Posts
    71
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    10

    Default

    Quote Originally Posted by me. View Post
    Your best bet is Ziphone. Check zibri's blog and download it. Then sync your data, restore your phone to 1.1.3 and use the updated version of his ziphone to activate and jailbreak it. It's very easy. Then install BSD subsystem, AnySim 1.3 and unlock it. You'll be on 4.03 modem with 1.1.3 FW. No post-reboot signal issues reported. You can also upgrade to 1.1.3 instead of restoring, keeping your data, but restore seems the safest way... There's lot of info on ziphone here.. Just do NOT unlock with ziphone, it doesn't work for 3.9bl.
    There's also a GUI from i.unlock.no based on ziphone if you don't like typing simple commands, but I don't know if its ziphone base is updated to the latest version.
    I'm in the same situation. If we do a restore do we lose SMS messages ? The contacts & other data is easily sync'ed but I hear there are differences between SMS db in 1.1.1 and 1.1.3. Hence did not want to screw up SMS.db by just copying it over to the new 1.1.3 place

  4. #4
    Senior Professional Array

    Join Date
    Nov 2007
    Posts
    252
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    19

    Default

    Quote Originally Posted by me. View Post
    Your best bet is Ziphone. Check zibri's blog and download it. Then sync your data, restore your phone to 1.1.3 and use the updated version of his ziphone to activate and jailbreak it. It's very easy. Then install BSD subsystem, AnySim 1.3 and unlock it. You'll be on 4.03 modem with 1.1.3 FW. No post-reboot signal issues reported. You can also upgrade to 1.1.3 instead of restoring, keeping your data, but restore seems the safest way... There's lot of info on ziphone here.. Just do NOT unlock with ziphone, it doesn't work for 3.9bl.
    There's also a GUI from i.unlock.no based on ziphone if you don't like typing simple commands, but I don't know if its ziphone base is updated to the latest version.
    Well, that doesn't seem to be true: I just unlocked a 1.1.3 on BL with Ziphone, as there seemed to be virtually no other way anymore to unlock it any other way now. Oktoprep and Official 1.1.3 Upgrader have vanished from v. 3.5 Community Sources.

  5. #5
    Senior Professional Array visions's Avatar

    Join Date
    Aug 2007
    Location
    Belize
    Posts
    185
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    17

    Default

    Use either one...

    Windows GUI

    ZiPhone 2.0 GUI


    From Developer site:
    http://zibree.blogspot.com/
    ZiPhone v2.0 is finally OUT.
    In the command line version, you will find a new
    option "-b" be very careful with that!
    I take no responsability if you brick your phone!
    ZiPhone -b will downgrade bootloader from 4.6 to 3.9,
    flash 4.03.13_G baseband version and
    unlock it (in one shot!).
    Download:
    Code:
    http://rapid$hare.com/files/91569663/V_ZiPhone2.0.zip
    Looks like this is the final one...hopefully

    ----------------------------------------

    MAC GUI


    From MMI:

    This jailbreaks any iphone with 1.1.3 firmware. It will unlock and activate 1.1.3 iphones with the 4.6 bootloader (1.1.2 and 1.1.3 OTB iphones). Very easy, one-click solution - couldn't be easier!

    This works on Apple OS X (Intel + PPC).
    Download Now:
    Code:
    http://rapid$share.com/files/91613229/V_ZiPhone_mmi.zip
    Enjoy!


    Replace $ with s
    If you found a friend, you found a treasure.


  6. #6
    Senior Professional Array DeadRobot's Avatar

    Join Date
    Aug 2007
    Posts
    217
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    18

    Default

    Quote Originally Posted by 416_guy View Post

    I have an OTB 1.1.1 with BL 3.9 week 42 iPhone I unlocked it with anysim 1.1 and kept it like that ever since.
    iphone.unlock.no is a wealth of info.

    I was exactly the same as you last night (firmware/bl/etc) and did the upgrade with them.

    So far, unlock.no has bailed me out of many upgrade/restore mistakes with his easy writing and examples.

    His GUI spells out exactly what each checkmark option means.

    Oh and Rogers changed it's SIM logo.
    Can I sync my iPhone to my Newton?

  7. #7
    Senior Professional Array sirzrx's Avatar

    Join Date
    Sep 2007
    Location
    Culiacan, Sinaloa, Mexico
    Posts
    186
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    16

    Default

    ill release an idiot proof guide 1.1.1 BL 3.9 to 1.1.3 . i have upgraded 4 phones now and a 5th tonight stay tunned =)

  8. #8
    Newbie Array

    Join Date
    Oct 2007
    Posts
    6
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    Quote Originally Posted by sirzrx View Post
    ill release an idiot proof guide 1.1.1 BL 3.9 to 1.1.3 . i have upgraded 4 phones now and a 5th tonight stay tunned =)
    Looking forward to your guide! =)

 

 

Similar Threads

  1. Replies: 1
    Last Post: 01-28-2011, 11:15 AM
  2. [Advice] Why i can't Jailbreak, Active, Unlock, tried everything.
    By aijunzhao in forum iPhone "2G" (Rev. 1)
    Replies: 5
    Last Post: 05-26-2008, 06:08 AM
  3. Replies: 5
    Last Post: 05-13-2008, 04:59 PM
  4. Replies: 2
    Last Post: 04-09-2008, 03:20 PM
  5. [Advice] Unlock/JailBreak with ZiPhone
    By SBouri in forum iPhone "2G" (Rev. 1)
    Replies: 8
    Last Post: 03-30-2008, 04:24 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBulletin®
Copyright © 2014 vBulletin Solutions, Inc. All rights reserved.
Search Engine Friendly URLs by vBSEO
(c) 2006-2012 Hackint0sh.org
All times are GMT +2. The time now is 06:24 AM.
twitter, follow us!