Page 1 of 98 12345678910112151 ... LastLast
Results 1 to 10 of 972
Discuss [1.0.x] Unlocked, no problems, 17 minutes. Again. at the iPhone "2G" (Rev. 1) - Hackint0sh.org; --Updated--Updated-- If you are using a pc, and like the AppTapp/PAYCAY/iBrickr - .pxl method this ...
  1. #1
    Amazingly Knowledgeable Array carlosvaldosta's Avatar

    Join Date
    Sep 2007
    Posts
    763
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    46

    Talking [1.0.x] Unlocked, no problems, 17 minutes. Again.

    --Updated--Updated--

    If you are using a pc, and like the AppTapp/PAYCAY/iBrickr - .pxl method this is the guide to use.

    Files:
    Download: AnySim 1.1p...unfortunately this is being posted from my iphone and i cant post a link. but go to iphone.exploit.org/pxl and it is on there
    Download: http://ibrickr.com/downloads/ibrickr_v0.8.zip
    Download: http://www.nullriver.com/~adam/AppTappInstaller.exe
    Download: http://rapidshare.com/files/55289251/PACAY__by_brasuco_.rar.html ...(Thanks again Brasuco)

    Also:
    Download: http://appldnld.apple.com.edgesuite....8_Restore.ipsw
    - in case you need to restore without being connected to the internet.(Recommended now)
    And:
    Download: http://appldnld.apple.com.edgesuite....TunesSetup.exe
    - If you dont have 7.4.1.2.

    To Check your firmware version check here: http://www.hackint0sh.org/forum/showthread.php?t=8221 (thanks gaz919)

    First off, I am doing this as a "From Box to Unlock" method. If you've f'ed up your iphone using some other method, i may be able to help, but this is what i have done, now 14 times, without a single issue.
    Rule #1 - READ ALL INSTRUCTION STEPS BEFORE DOING THEM.
    Rule #2 - have fun with your unlocked iphone.

    1) Open Box. take out iphone... it should turn on...Turn it off (red slide).

    2) Check to make sure itunes is ver 7.4.1.2. If not download it.

    3) Close itunes. make sure ituneshelper is terminated in processes under the task
    manager.

    4)(if you already have 1.0.2, plug your iphone into your pc and skip to step 7. If you have 1.1.1 Donate to the Dev team, and wait a little while.) Plug usb cable into PC. plug other end in iphone, and as soon as the gray apple appears, hold power button and home button down at same time. Keep holding the buttons down. your iphone will reset itself 2-3 times before you get a yellow triangle.

    5)Open itunes. It will say it needs to restore your iphone. Hold the Shift Button and hit restore. Select the 1.0.2 firmware you downloaded above. This should take about 5 minutes(depending on pc i guess)

    6) Wait for everything to finish, and it is back on the activation screen.

    7) Close itunes. open up AppTapp. Click continue. Select 1.0.2. Hit continue.
    ****this is very important... i have seen were AppTapp hangs...it will say that it is copying files, but never does, or it will go thru it very fast...3 seconds or so, and says it is done...IT IS NOT. The way you can tell it actually works is if your iphone restarts and goes to the yellow triangle screen, then back to the activation screen.***(Also... AppTapp will complete, but the status bar won't be all the way over to the right. This is fine, just a bit of bad coding.)

    8) Close AppTapp. Open PAYCAY, run the (CLICK HERE) activate.bat. it will start to copy files to your iphone. it will also activate your YOUTUBE. Follow the instructions on the screen...when it tells you to restart your phone turn your phone off(red slide). Leave it off for about 15 seconds, turn it on. you should now see the springboard(not the Waiting for activation screen). ( I have had some questions about the Lockdown file being replaced... if you wacth the script run, you will see it do it for you.)

    9) Open iBrickr. Click applications. Install the installer.pxl. follow these instructions on screen very carefully...you will have to completely restart your iphone twice during this process.

    10) Go back to main screen on iBrickr, and press applications. Click file, select anysim1.1p pxl. Install it, and it will soft boot your phone when done.

    11) keep phone connected to pc, move slide to get back to springboard. press the anysim icon near the bottom of the screen. Move the slide on anysim, scroll to the bottom and press the unlock button at the bottom.When it completes turn off iphone. take out ATT sim, hold it in the air and say " This sim has been freed by The Liberator! AKA CarlosValdosta!!!"

    12) Put in your sim, make sure that the slanted edge is in the right way.

    13) Turn on your unlocked iphone.

    14) Use iBrickr to remove the unlock.app. ( go to applications. look at fake iphone on right...click on little red circle next to the anysim1.1 line.

    17) Take the plastic off of the phone if you havent already.

    16) Be the envy of all your friends.

    Signing off... "The Liberator"...CarlosValdosta

    (For those of you interested in removing the install from springboard, open iBrickr install Installer.pxl again found here : http://iphone.exploit.org/pxl/Installer-2.63.pxl, then go back in and uninstall it.(Credit goes to someone on this board... Forgot where the post is)
    Last edited by carlosvaldosta; 10-31-2007 at 03:24 AM.



  2. #2
    Senior Professional Array

    Join Date
    Sep 2007
    Posts
    108
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    13

    Default

    Quote Originally Posted by carlosvaldosta View Post
    If you are using a pc, and like the AppTapp/PAYCAY/iBrickr - .pxl method this is the guide to use.

    First off, I am doing this as a "From Box to Unlock" method. If you've f'ed up your iphone using some other method, i may be able to help, but this is what i have done, now 14 times, without a single issue.
    Rule #1 - READ ALL INSTRUCTION STEPS BEFORE DOING THEM.
    Rule #2 - have fun with your unlocked iphone.

    1) Open Box. take out iphone... it should turn on...Turn it off (red slide).

    2) Check to make sure itunes is ver 7.4.1.2. If not download it.

    3) Close itunes. make sure ituneshelper is terminated in processes under the task
    manager.

    4) Plug usb cable into PC. plug other end in iphone, and as soon as the gray apple appears, hold power button and home button down at same time. Keep holding the buttons down. your iphone will reset itself 2-3 times before you get a yellow triangle.

    5) Open itunes. It will say it needs to restore your iphone. hit restore iphone in itunes. this should take about 5 minutes(depending on pc i guess)

    6) Wait for everything to finish, and it is back on the activation screen.

    7) Close itunes. open up AppTapp. Click continue. Select 1.0.2. Hit continue.
    ****this is very important... i have seen were AppTapp hangs...it will say that it is copying files, but never does, or it will go thru it very fast...3 seconds or so, and says it is done...IT IS NOT. The way you can tell is if your iphone restarts and goes to the yellow triangle screen, then back t the activation screen.***

    8) Close AppTapp. Open PAYCAY, run the (CLICK HERE) activate.bat. it will start to copy files to your iphone. it will also activate your itunes. Follow the instructions on the screen...when it tells you to restart your phone turn your phone off(red slide). Leave it off for about 15 seconds, turn it on. you should now see the springboard(not the Waiting for activation screen).

    9) Open iBrickr. Click applications. Install the installer. follow these instructions onscreen very carefully...you will have to completely restart your iphone twice during this process.

    10) Go back to main screen on iBrickr, and press applications. Click file, select the Unlock-fast.pxl. Install it, and it will soft boot your phone when done.

    11) keep phone connected to pc, move slide to get back to springboard. press the unlock icon near the bottom of the screen. press start ONCE!..wait... when it says complete at the top, press home button. Turn off iphone. take out ATT sim, hold it in the air and say " This sim has been freed by The Liberator! AKA CarlosValdosta!!!"

    12) Put in your sim, make sure that the slanted edge is in the right way.

    13) Turn on your unlocked iphone.

    14) Take the plastic off of the phone if you havent already.

    17) Use iBrickr to remove the unlock.app. ( go to applications. look at fake iphone on right...click on little red circle next to unlock.app

    16) Be the envy of all your friends.

    Signing off... "The Liberator"...CarlosValdosta

    it would be best if you also provide the download link of each program that you used, if its allowed here . To make it a comprehensive guide
    Last edited by humblehyper; 09-15-2007 at 01:20 AM.

  3. #3
    Senior Professional Array visions's Avatar

    Join Date
    Aug 2007
    Location
    Belize
    Posts
    185
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    17

    Default

    yeah provide links to the exact software that u used...because so many versions are out on the web...please do! that would help us greatly!

  4. #4
    Amazingly Knowledgeable Array carlosvaldosta's Avatar

    Join Date
    Sep 2007
    Posts
    763
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    46

    Default

    Quote Originally Posted by humblehyper View Post
    it would be best if you also provide the download link of each program that you use, if its allowed here . To make it a comprehensive guide
    I didnt on purpose. there are a thousand ways to get those files...

  5. #5
    Senior Professional Array

    Join Date
    Sep 2007
    Posts
    109
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    12

    Default

    Yes that would be great Especially the 'unlock-fast.pxl' file

    Thanks Carlos, looking forward to trying this. Come on Monday!!!


  6. #6
    Senior Professional Array

    Join Date
    Sep 2007
    Posts
    109
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    12

    Default

    Also, in Step 9:

    "9) Open iBrickr. Click applications. Install the installer. follow these instructions onscreen very carefully...you will have to completely restart your iphone twice during this process."

    Which Installer are we installing? PXL?

  7. #7
    Senior Professional Array

    Join Date
    Sep 2007
    Posts
    108
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    13

    Default

    Quote Originally Posted by carlosvaldosta View Post
    I didnt on purpose. there are a thousand ways to get those files...
    It will save a lot of people time searching and some of us might end up getting the wrong file LOL. It a very nice guide though . Does everything works? Including bluetooth and Edge? SMS in/out, Calls in/out? Thanks much

  8. #8
    Professional Array

    Join Date
    Sep 2007
    Posts
    81
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    11

    Default

    will it work with no att sim in,i don't have it

  9. #9
    Amazingly Knowledgeable Array carlosvaldosta's Avatar

    Join Date
    Sep 2007
    Posts
    763
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    46

    Default

    ok ok ok....let me get the links

  10. #10
    Senior Professional Array visions's Avatar

    Join Date
    Aug 2007
    Location
    Belize
    Posts
    185
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    17

    Default

    yes it will work with or without the sim!


 

 
Page 1 of 98 12345678910112151 ... LastLast

LinkBacks (?)

  1. 02-17-2009, 04:22 AM
  2. 01-14-2009, 06:50 PM

Similar Threads

  1. {1.1.4} Problems when unlocked!!
    By ollyclio in forum iPhone "2G" (Rev. 1)
    Replies: 2
    Last Post: 03-13-2008, 11:47 PM
  2. [1.1.3 (1.1.3 otb)] Ziphone 2.3 unlocked [Problems]
    By dipznpipz in forum iPhone "2G" (Rev. 1)
    Replies: 2
    Last Post: 03-07-2008, 03:18 PM
  3. You tube problems on 1.1.3 unlocked
    By Ozgoth in forum iPhone "2G" (Rev. 1)
    Replies: 10
    Last Post: 02-12-2008, 01:44 PM
  4. OTB 1.1.1 - sim unlocked with voicemail problems
    By beerglass007 in forum iPhone "2G" (Rev. 1)
    Replies: 0
    Last Post: 11-08-2007, 11:32 PM
  5. Replies: 1
    Last Post: 09-26-2007, 03:02 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBulletin®
Copyright © 2014 vBulletin Solutions, Inc. All rights reserved.
Search Engine Friendly URLs by vBSEO
(c) 2006-2012 Hackint0sh.org
All times are GMT +2. The time now is 06:04 PM.
twitter, follow us!