Page 1 of 4 1234 LastLast
Results 1 to 10 of 34
Discuss [1.0.2 OTB] no IMEI no WIFI, need repair at the iPhone "2G" (Rev. 1) - Hackint0sh.org; I have the same problem, no IMEI no WIFI, need repair. I have a 1.02 ...
  1. #1
    Rookie Array

    Join Date
    Oct 2007
    Location
    Kuwait
    Posts
    12
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default [1.0.2 OTB] no IMEI no WIFI, need repair

    I have the same problem, no IMEI no WIFI, need repair. I have a 1.02 phone that was
    unlocked, tried to restore to a 1.1.1 without verginising, thus the problem ocured.
    I have tried every thing mentioned, nothing works.

    My status so far:

    when I run the bbupdater -f *.fls, I get an endless loop.

    When I run the bbupdater -l, I get a iphone bbupdater -l failed to download .fls:
    could not verify downloaded image.

    when I run the bbupdated -e *.eep, I get a message saying upgrade from YYYYY or some
    strange characters.

    When I try to restore the iphone again (using the ibrickr, DFU mode, itunes
    technique), it starts the restore process then never ends at the "restoring iphone
    firmware" phase of the itunes. After a long time (30 min +), itunes gives me an
    unknown error occured (1002) message and the yellow triangle is on the iphone. I
    then activate and jailbreak it using apptappinstaller and PACAY.

    Then I install all needed files (Terminal, BSD 1.5, Uictl through the ibrickr pxl
    technique.

    Status for far:

    bbupdater -e *.eep gives a could not retrieve version info: file not found. Upgrade from a@@ (funny characters) to YYYY (funny characters). Then completes.

    bbupdater -f *.fls gives an endless loop, so I have to stop it with a ^C command.

    Any help would be appreciated.



  2. #2
    Professional Array Gstar's Avatar

    Join Date
    Jan 2008
    Location
    Germany
    Posts
    92
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    11

    Default

    hi anaq8i,

    i have the same probleme.
    so can u send me the uictl.pxl? i can't find it....

    thanks

  3. #3
    Rookie Array

    Join Date
    Oct 2007
    Location
    Kuwait
    Posts
    12
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    Quote Originally Posted by Gstar View Post
    hi anaq8i,

    i have the same probleme.
    so can u send me the uictl.pxl? i can't find it....

    thanks
    You can download it from http://iphone.exploit.org/pxl/index2.html and install it with ibrickr (just make sure you rename it to .pxl

  4. #4
    Rookie Array

    Join Date
    Jan 2008
    Posts
    26
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    Quote Originally Posted by anaq8i View Post
    You can download it from http://iphone.exploit.org/pxl/index2.html and install it with ibrickr (just make sure you rename it to .pxl
    where..
    i can't find it.. wath's the exact name.. please.?

  5. #5
    Rookie Array

    Join Date
    Jan 2008
    Posts
    26
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    Quote Originally Posted by alino74 View Post
    where..
    i can't find it.. wath's the exact name.. please.?


    got it..


    thanks..
    you must find " Launchctl GUI v0.25 "


  6. #6
    Senior Professional Array

    Join Date
    Nov 2007
    Posts
    171
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    just upgrade to 1.1.2, and then downgrade to 1.1.1 and run virginiser and unlock.

  7. #7
    Professional Array Gstar's Avatar

    Join Date
    Jan 2008
    Location
    Germany
    Posts
    92
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    11

    Default

    hi guys,

    got the uictl.pxl, too.

    my symptoms:
    - H/W unlock failed, i think.
    - putty freezed even before i could type any command and the display turned into
    black and i wasn't able to type anything on the iphone, but the phone was still turned on, because itunes recognized the phone. i restarted the phone. after powering on i had no wifi/sound, unknown imei/iccid, "repair needed"....

    but now what can i do? i'm on 1.0.2 again but i don't know what BL i have after the H/W unlock failed. bbupdater -v doesn't work. so how can i find out the BL?

    if i still have the BL 4.6 i'm lost, right? because you can't flash the baseband with BL 4.6, right?

    so does anybody know what to do?

    sorry for my bad school english. i'm half german and half italian

    hope that anybody got a solution, because i don't like this exclusiv paper weight

    so far
    gstar

  8. #8
    Advanced Array

    Join Date
    Oct 2007
    Location
    Guayaquil, Ecuador
    Posts
    44
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    Lets try to do some help, first i got stuck in running ienew because i was running fw 1.1.2 and not fw 1.1.1 or 1.0.2, so i needed to reboot my iphone and i got the "repair needed" message; so i restored to fw 1.0.2 and installed terminalvt and bsd subsystem and all the files needed (ienew, secpack, etc), run ienew again, got a meesage that "waiting data" "canīt write", so i just decided to skip this and continue with the tutorial http://iphone.unlock.no/bootloader_downgrade.htm, and then run iunew (testcode) and everything work normally, after that i just upgraded to fw1.1.2 and then back to 1.1.1 and got everything, wifi, serial, etc. my iphone got back to life.

    Godd luck!

  9. #9
    Professional Array Gstar's Avatar

    Join Date
    Jan 2008
    Location
    Germany
    Posts
    92
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    11

    Default

    Lets try to do some help, first i got stuck in running ienew because i was running fw 1.1.2 and not fw 1.1.1 or 1.0.2, so i needed to reboot my iphone and i got the "repair needed" message; so i restored to fw 1.0.2 and installed terminalvt and bsd subsystem and all the files needed (ienew, secpack, etc), run ienew again, got a meesage that "waiting data" "canīt write", so i just decided to skip this and continue with the tutorial http://iphone.unlock.no/bootloader_downgrade.htm, and then run iunew (testcode) and everything work normally, after that i just upgraded to fw1.1.2 and then back to 1.1.1 and got everything, wifi, serial, etc. my iphone got back to life.

    Godd luck!
    thanks for the ray of hope. i'll give a try later. at the moment i'm cut up.to much.
    did the iunew command work the first time?
    to me it ends with
    # iunew
    Resetting the Baseband...Done
    Opened: /dev/tty.debug
    iUnlocker: tool by geohot
    Spamming AT, waiting for a response

    what does that mean?

  10. #10
    Rookie Array

    Join Date
    Oct 2007
    Location
    Kuwait
    Posts
    12
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    Quote Originally Posted by meatwagon View Post
    just upgrade to 1.1.2, and then downgrade to 1.1.1 and run virginiser and unlock.
    I tried that, did not work, still no IMEI no WIFI, and importantly, NO FIRMWARE.

    Any other suggestions are appreciated.


 

 
Page 1 of 4 1234 LastLast

Similar Threads

  1. need help for repair corrupted imei
    By SLIPLOCK in forum iPhone 3G
    Replies: 4
    Last Post: 05-28-2009, 08:58 PM
  2. Replies: 43
    Last Post: 05-02-2008, 09:21 AM
  3. Repair Needed: No IMEI, No wifi, no bluetooth
    By reznor9 in forum General
    Replies: 6
    Last Post: 03-04-2008, 06:21 AM
  4. [1.1.2 OTB] "Repair needed" no IMEI/BB/WIFI, CANNOT even restore
    By thetangstr in forum iPhone "2G" (Rev. 1)
    Replies: 47
    Last Post: 02-06-2008, 09:05 AM
  5. no wifi, no calls (repair needed), no imei\iccid on 1.1.1
    By zoro66 in forum iPhone "2G" (Rev. 1)
    Replies: 6
    Last Post: 11-17-2007, 10:54 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBulletin®
Copyright © 2014 vBulletin Solutions, Inc. All rights reserved.
Search Engine Friendly URLs by vBSEO
(c) 2006-2012 Hackint0sh.org
All times are GMT +2. The time now is 03:42 AM.
twitter, follow us!