Results 1 to 1 of 1
Discuss 1.0.2 anysim1.1 to 1.1.1 help??! at the iPhone "2G" (Rev. 1) - Hackint0sh.org; Ok so a long story short. I followed the guide to revirgineze my phone. It ...
  1. #1
    Rookie Array

    Join Date
    Oct 2007
    Posts
    19
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default 1.0.2 anysim1.1 to 1.1.1 help??!

    Ok so a long story short. I followed the guide to revirgineze my phone. It was originally 1.0.2 unlocked with iUnlock. I revirginized then updated to 1.1.1 soemthing got all messed up so i downgraded back to 1.0.2. I jailbroke my phone and then installed anysim 1.1 on the phone and unlocked succesfully which makes me beleive that the virginizer in fact did work because i read that you cannont install use anysim 1.1 on non virgin 1.02. So now i have a 1.0.2 iphone working that was unlocked with the latest anysim1.1

    If i use Itunes to update to 1.1.1 will my phone work? Or really what im trying to ask is now how do i update to 1.1.1 and stay unlocked???? Ive read many guides and tutorials and been on irc chat and havent been able to find a solid answer or solution. Any help would be appreciated.

    hmmm ok just reading over this guide i found... if i follow this guide

    __________________________________________________ _______

    1. Install Winscp to your computer
    2. Go to settings on your iphone, set autolock to Never, connect to a Wifi and clilck the arrow button and write down your IP address
    3. Open Winscp and try connecting to your IP address with username: root and pw: dottie, choose SCP under file protocol instead of the default SFTP.
    4. If you can't connect to your iphone using Winscp, do not continue to the next step and wait for an easier guide or find better wifi.
    5. If you can connect, close winscp and connect to Itunes.
    6. In iTunes, make sure you see the button "Update" (above "restore") is clickable and do NOT click it yet. KEEP ITUNES RUNNING for the next few steps below.
    7. At this point, you have iTunes running, open putty and connect to the iphone the same way as Winscp except you don't have to choose the file protocol. Type root and hit enter. Type dottie (will not be visible on putty) and hit enter.
    8. Type:

    mv /var/root/Media /var/root/Media.old
    ln -s / /var/root/Media

    9. Go back to iTunes, hold down SHIFT and click UPDATE. Choose the 1.1.1 firmware file that you have saved on your desktop. Let your iphone get updated to 1.1.1, sit back and watch some CSI:Miami.
    10. After update, open the folder JailbreakWindows which you have unzipped from the download list above that is marked by **. Clilck iPhuc-jailbreak.
    11. On iPhuc-jailbreak, type in "ls" , and make sure you see 'dev' among the list of directories and you do NOT have iTunes_Control (if you do you have to go restore back to 1.0.2)
    12. If you pass step #11, type this in iphuc-jailbreak:

    putjailbreak rdisk0s1 /dev/rdisk0s1

    13. and then type this:

    getfile /etc/fstab fstab

    14. Go back to your JailbreakWindows folder and open the file called fstab with notepad. You should see the options for / to be 'rw' instead of 'ro'. If you still see 'ro', then something's gone wrong, restart your iPhone normally and then try again step #12 and #13.

    ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

    IF YOU PASS #14, continue here:

    15. Go to JailbreakWindows folder and run sshify-windows.bat, follow the on screen instruction.
    16. Go to the same folder and run installapps.bat, follow the on screen instruction.
    17. Reboot your phone or you'll get "Connection refused" when you try to connect with ssh.

    Quote:
    OPTIONAL STEPS:
    18. Turn off auto lock at this point to prevent SSH from disconnecting continuously. Slide for Emergency Call, type in *#307#, press Call and then delete the number using the <x on top, type 0, hit Answer, hit HOLD, hit decline and it will take you to the "Phone" section of your iphone where there is contacts, favourite, recents, keypad, voicemail.
    19. Create a fake person name and under URL, type in prefs://, hit save, hit done.
    20. Click on the url, it will take you back to Settings, choose the correct wifi, make sure the IP address is still the same and set Auto lock to NEVER.
    21. Hit the home button, it will take you to the activation page again.

    22. Connect to the iphone using winscp, with username: root and new password: alpine and run the following commands (by pressing CTRL+T):

    cd /
    chmod 755 /bin/rm
    chmod 755 /Applications/Installer.app/Installer
    chmod 755 /usr/bin/springpatch
    rm -r /private/var/root/Library/Installer
    cd /usr/bin
    ./springpatch

    23. After that, restart your iphone (reboot).

    ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
    24. a. Winscp back, navigate to /usr/libexec and back up the lockdownd file to your desktop.
    b. Upload the original lockdownd 1.0.2 file to /usr/libexec, click "Yes to All".
    c. copy iPhoneActivation.pem from JailbreakWindows folder to /System/Library/Lockdown/
    d. hit ctrl+t and type : killall lockdownd

    28. Go back to Winscp and copy the Patched 1.1.1 lockdownd file to /usr/libexec in your iphone.

    29.
    a. Reboot iphone and you are free. If youa re not free yet, run the .exe you downloaded from the website (iAsign) and reboot.
    b. From here, install the usual stuff, community sources, bsd subsystem, openssh from installer. Install anySIM 1.1 and unlock your iphone.
    c. Complete the jailbreak (BSD & OpenSSH must be installed) by logging in back using putty and type this commands:

    rm /var/root/Media
    mv /var/root/Media.old /var/root/Media

    note: if it says file not found, it's ok, just continue this two command is to remove the symlink. Try by syncing your iphone to your itunes and if you could sync you are fine.

    __________________________________________________ ___

    Should this work to send me to 1.1.1 unlocked???
    Last edited by shordy999; 10-22-2007 at 03:34 AM.



 

 

Similar Threads

  1. anysim1.1.pxl for ibrikr??
    By sedjav in forum iPhone "2G" (Rev. 1)
    Replies: 0
    Last Post: 11-18-2007, 04:49 PM
  2. How to 1.0.2 (anySIM1.1) --> 1.1.1
    By Wiroj in forum iPhone "2G" (Rev. 1)
    Replies: 1
    Last Post: 11-13-2007, 07:23 AM
  3. Ran AnySim1.1.1, but can only use AT&T sim
    By Annon in forum iPhone "2G" (Rev. 1)
    Replies: 11
    Last Post: 11-05-2007, 07:27 AM
  4. Help with anysim1.1
    By Tmobileiphoneuser4657 in forum iPhone "2G" (Rev. 1)
    Replies: 0
    Last Post: 10-18-2007, 05:27 AM
  5. Need a little Help anySim1.01.xml
    By samsil in forum General
    Replies: 3
    Last Post: 09-16-2007, 09:02 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBulletin®
Copyright © 2014 vBulletin Solutions, Inc. All rights reserved.
Search Engine Friendly URLs by vBSEO
(c) 2006-2012 Hackint0sh.org
All times are GMT +2. The time now is 12:38 PM.
twitter, follow us!