Results 1 to 10 of 10
Discuss [1.0.2] [1.0.2 OTB] No wifi+bt+imei+iccid. HELP at the iPhone "2G" (Rev. 1) - Hackint0sh.org; Bought this 4GB frommrket.came with no baseband at all with 1.0.2 I tried to upgrade ...
  1. #1
    Rookie Array

    Join Date
    Jan 2008
    Posts
    18
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default [1.0.2] [1.0.2 OTB] No wifi+bt+imei+iccid. HELP

    Bought this 4GB frommrket.came with no baseband at all with 1.0.2
    I tried to upgrade to 1.1.3 and it did with error 1011 in itunes after that ran zIphone but it doesnt go past SPAMMIN AT, Waiting for DATA . and it just hang there .

    so i restored it back to 1.0.2 activated thru PAYCAY and jailbreak via iBrickr.
    installed BSD, Terminal , UICTL . uploaded ieraser,bbupdater,seckpack,ICE03.14.08_G.eep,ICE03 .14.08_G.fls.
    changed their permission .

    unload-w comm.apple.CommCenter
    Stop com.apple.mobile.lockdown
    Restart the phone as i got Resource Busy
    ran ieraser command but no luck it just hangs at waiting for data .

    after frew hours . when i restarted my phone . now everything is back .
    weired thing is MODEM FIRMWARE is 04.01.13_G on 1.0.2 .
    wi-fi is not greyed. i can connect to my AP . but not able to open any site in SAFARI . and no iCON on wi-fi in TASKBAR.
    IMEI now start with 011******.
    my carrier name is not coming up in taskbar . i can make/ receieve call .

    now what could be the best way to restore it 1.1.1 or any other good version ?
    i tried to RESTORE it to 1.1.1 but iPhone Repaird Messge Appread after Retore .
    And Restore didnt well as it should it gave me 1011 Error.
    so i downgrade it back to 1.0.2 and again ran ieraser command and after restart . baseband is back .
    dont know wht is going on

    Any way to upgrade and resolve the all issue?



  2. #2
    Senior Professional Array yuhackman's Avatar

    Join Date
    Jan 2008
    Posts
    346
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    25

    Post

    Quote Originally Posted by cisco_tech View Post
    Bought this 4GB frommrket.came with no baseband at all with 1.0.2
    I tried to upgrade to 1.1.3 and it did with error 1011 in itunes after that ran zIphone but it doesnt go past SPAMMIN AT, Waiting for DATA . and it just hang there .

    so i restored it back to 1.0.2 activated thru PAYCAY and jailbreak via iBrickr.
    installed BSD, Terminal , UICTL . uploaded ieraser,bbupdater,seckpack,ICE03.14.08_G.eep,ICE03 .14.08_G.fls.
    changed their permission .

    unload-w comm.apple.CommCenter
    Stop com.apple.mobile.lockdown
    Restart the phone as i got Resource Busy
    ran ieraser command but no luck it just hangs at waiting for data .

    after frew hours . when i restarted my phone . now everything is back .
    weired thing is MODEM FIRMWARE is 04.01.13_G on 1.0.2 .
    wi-fi is not greyed. i can connect to my AP . but not able to open any site in SAFARI . and no iCON on wi-fi in TASKBAR.
    IMEI now start with 011******.
    my carrier name is not coming up in taskbar . i can make/ receieve call .

    now what could be the best way to restore it 1.1.1 or any other good version ?
    i tried to RESTORE it to 1.1.1 but iPhone Repaird Messge Appread after Retore .
    And Restore didnt well as it should it gave me 1011 Error.
    so i downgrade it back to 1.0.2 and again ran ieraser command and after restart . baseband is back .
    dont know wht is going on

    Any way to upgrade and resolve the all issue?
    Try simple solution, put it in DFU mode (use iBrickr, to start downgrade to 1.02 if you are on 1.1.1, your screen will go white, or download ZiPhone form www.i.unlock.no or www.zibree.blogspot.com or eZiPhone from http://ziphoneold.blogspot.com/ (the two are virtualy the same but eZiPhone have cleaner user interface) and put your iPhone in DFU by ZiPhone/eZiphone ) than RESTORE to 1.1.3 (first you must download 1.1.3 restore file use this link :
    http://www.hackint0sh.org/forum/showthread.php?t=22056) after succesfull restore use either tool to jailbreak, activate and unlock your iPhone, if everything go allright you should have your fully functional iPhone within minutes

    Hope this help you ....

  3. #3
    Rookie Array

    Join Date
    Jan 2008
    Posts
    18
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    ok i put it in DFU theru eziphone . restore it in itunes with 1.1.3 after restore i got error in itune 1011. then tried to boot the phone from ibrick screen turned into green.
    So i restored it again in itunes. again ogt 1011 error. this time it did boot and went to the Activate Screen.
    But Phone Repair Message is there .
    ran -a -j . but it didnt succed.
    it just hangs at SPAMMIN AT. WAITING FOR DATA.

    so what to do now ?
    again downgrade to 1.1.1 >1.0.2 and then try o flash baseband with bbupdater ?
    but even bbupdater isnt leting me to flash it .

    Any other method ?
    Thnx

  4. #4
    Senior Professional Array yuhackman's Avatar

    Join Date
    Jan 2008
    Posts
    346
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    25

    Default

    Quote Originally Posted by cisco_tech View Post
    ok i put it in DFU theru eziphone . restore it in itunes with 1.1.3 after restore i got error in itune 1011. then tried to boot the phone from ibrick screen turned into green.
    So i restored it again in itunes. again ogt 1011 error. this time it did boot and went to the Activate Screen.
    But Phone Repair Message is there .
    ran -a -j . but it didnt succed.
    it just hangs at SPAMMIN AT. WAITING FOR DATA.

    so what to do now ?
    again downgrade to 1.1.1 >1.0.2 and then try o flash baseband with bbupdater ?
    but even bbupdater isnt leting me to flash it .

    Any other method ?
    Thnx
    Your IMEI, ICCID ?

  5. #5
    Rookie Array

    Join Date
    Jan 2008
    Posts
    18
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    both UNKNOWN


  6. #6
    Senior Professional Array yuhackman's Avatar

    Join Date
    Jan 2008
    Posts
    346
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    25

    Default

    Quote Originally Posted by cisco_tech View Post
    both UNKNOWN
    I should think so ....

    Basicly you have corrupted baseband or no basband at all, if you iPhone is week <47 you can go down to 1.02,and try to use iBrickr tu upload PXL files (terminal, virginizer scripts ....) and try it manually (if you did not try it allready), bu be aware there are several virginizing solutions, and some of them should work for you .... sorry, for now i'm unable to help you, you shuld try to search this forum shure you will find a solution, best od luck ....

    EDIT: In your first post you said you managed to restore your original IMEI, and your WiFi was functional, but could not connected via safari (due to wrong baseband), right? How about you try APPTAPINSTALER.exe and try to jailbreak with it,see maybe it should help.
    Last edited by yuhackman; 02-28-2008 at 03:13 AM.

  7. #7
    Rookie Array

    Join Date
    Jan 2008
    Posts
    18
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    sure will give it a try and post it here .

  8. #8
    Rookie Array

    Join Date
    Jan 2008
    Posts
    18
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    tried couple of method . saviour pack , kengz-virginizer-pack
    No luck .
    it just hangs after applying ieraser command .
    Waiting for Data .

    any other method ?

  9. #9

  10. #10
    Rookie Array

    Join Date
    Jan 2008
    Posts
    18
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    thxn for reply 45674567
    i have read that only solution is now swapping the commboard.
    but sometimes after few coldstart baseband does come back (04.01.13-G) .
    but again when you reboot your phone its gone way .


 

 

Similar Threads

  1. Replies: 0
    Last Post: 04-07-2009, 05:57 PM
  2. [1.1.4] ziPhone2.5 - no FW, IMEI, ICCID WIFI or Bluetooth adress
    By hottbot in forum iPhone "2G" (Rev. 1)
    Replies: 3
    Last Post: 03-25-2008, 07:02 PM
  3. [1.0.2] [1.1.1 OTB] Can't reflash. No wifi+bt+imei+iccid. Question
    By singularidad in forum iPhone "2G" (Rev. 1)
    Replies: 8
    Last Post: 02-27-2008, 07:49 PM
  4. Replies: 0
    Last Post: 12-06-2007, 07:36 AM
  5. Replies: 30
    Last Post: 10-25-2007, 01:54 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBulletin®
Copyright © 2014 vBulletin Solutions, Inc. All rights reserved.
Search Engine Friendly URLs by vBSEO
(c) 2006-2012 Hackint0sh.org
All times are GMT +2. The time now is 09:09 AM.
twitter, follow us!