Results 1 to 5 of 5
Discuss Baseband bricked? No Wifi, No Bluetooth etc. at the iOS 3.x (iPhone OS 3.x) - Hackint0sh.org; Hello out there, i have a problem with my iPhone 3G. It is factory-unlocked and ...
  1. #1
    Newbie Array

    Join Date
    Oct 2009
    Posts
    2
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default Baseband bricked? No Wifi, No Bluetooth etc.

    Hello out there,

    i have a problem with my iPhone 3G. It is factory-unlocked and while I was updating to 3.0.1 my PC crashed. Then the iPhone got into the Restore-Mode and i tried to restore. It fails with errors 1604 or 23.

    Now I tried almost everything to restore my baseband. Downgraded to 3.0 up to 3.1 form DFU AND Restore-Mode nothing changed. When I do not jailbreak, the iPhone stucks at the Activation-Screen and "Searching.." is standing in the upper left corner.

    Now I'm searching for a way to reflash my baseband.

    Maybe my iRecovery output is helpful:

    Code:
    =======================================
    ::
    :: iBoot for n82ap, Copyright 2009, Apple In
    ::
    ::      BUILD_TAG: iBoot-596.24
    ::
    ::      BUILD_STYLE: RELEASE
    ::
    ::      USB_SERIAL_NUMBER: CPID:8900 CPRV:30
    C41C0D23CE IBFL:01 SRNM:[82832U0CY7H]
    ::
    =======================================
    
    [FTL:MSG] Apple NAND Driver (AND) RO
    [NAND] Device ID           0xba94d598
    [NAND] BANKS_TOTAL         4
    [NAND] BLOCKS_PER_BANK     4096
    [NAND] SECTORS_PER_PAGE    824288
    [NAND] BYTES_PER_SPARE     216
    [FTL:MSG] FIL_Init            [OK]
    [FTL:MSG] BUF_Init            [OK]
    [FTL:MSG] FPart Init          [OK]
    read old style signature 0x43303035 (line:30
    [FTL:MSG] VFL Register    [OK]
    [FTL:MSG] VFL Init            [OK]
    [FTL:MSG] VFL_Open            [OK]
    [FTL:MSG] FTL Register    [OK]
    [FTL:MSG] FTL_Open            [OK]
    Boot Failure Count: 1   Panic Fail Count: 0
    Radio failed to respond.
    Radio failed to respond.
    Pinging Radi Failed, 4
    Entering recovery mode, starting command pro
    (Recovery) iPhone$ printenv
      build-style = "RELEASE"
      build-version = "iBoot-596.24"
      config_board = "n82ap"
      loadaddr = "0x9000000"
      boot-command = "fsboot"
      idle-off = "true"
      boot-device = "nand0"
      boot-partition = "0"
      boot-path = "/System/Library/Caches/com.ap
    x"
      display-color-space = "RGB888"
      display-timing = "optC"
    P bootdelay = "0"
    P backlight-level = "26"
    P platform-uuid = <DATA>
    P obliteration = "Enabling auto boot"
    P restored-exit-status = "0x100"
    P auto-boot = "true"
    P btaddr = "12:12:12:12:15"
    P wifiaddr = "08-00-20-ae-fd-7e"
      image-version = "0x3"
      framebuffer = "0xfd00000"
      secure-boot = "0x1"
      radio-error = "0x100"
      radio-error-string = "Corrupted stack"
      ? = "0x0"
    Wifiaddr and btaddr are changed by me.


    I hope someone can help me


    Regards,



  2. #2
    Administrator Array

    Join Date
    Oct 2007
    Posts
    4,145
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    10

    Default

    for factory unlocked phone, you can DFU restore with firmware 3.1 and let itunes activate the phone.

    To jailbreak, use pwnagetool to create custom fw 3.1 without selecting activation then restore it to the phone
    ** If you just want to support hackint0sh.org with a donation click here **

  3. #3
    Newbie Array

    Join Date
    Oct 2009
    Posts
    2
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    I did that several times but it does not help.

  4. #4
    Advanced Array

    Join Date
    Jun 2009
    Posts
    39
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    Error 23 is due to a hardware failure.
    This happened most likely because of your PC crash, flashing stopped and left the baseband corrupted.
    As of now you can't revive a baseband which didn't get properly flashed, not with any tool out there.
    Your only option is to get a replacement phone from Apple. Sorry.

  5. #5
    Rookie Array

    Join Date
    Oct 2009
    Location
    the Nine - four-NIZZINE !!!
    Posts
    19
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Default

    Quote Originally Posted by phoeny View Post
    Error 23 is due to a hardware failure.
    This happened most likely because of your PC crash, flashing stopped and left the baseband corrupted.
    As of now you can't revive a baseband which didn't get properly flashed, not with any tool out there.
    Your only option is to get a replacement phone from Apple. Sorry.

    Thats a drag. Ouch. I feel for you man I am so so sorry


 

 

LinkBacks (?)

  1. 03-09-2010, 08:18 PM

Similar Threads

  1. Replies: 6
    Last Post: 12-29-2011, 06:33 PM
  2. iPhone 3G Baseband Problem. No WiFi/IMEI/Bluetooth/ICCID/Modem Firmware
    By melodosgr in forum iOS 3.x (iPhone OS 3.x)
    Replies: 10
    Last Post: 01-01-2011, 03:56 PM
  3. Replies: 14
    Last Post: 03-15-2009, 06:22 AM
  4. Baseband corrupted? No WIFI/GSM/Bluetooth
    By krede21 in forum General
    Replies: 9
    Last Post: 01-31-2009, 05:36 AM
  5. Replies: 2
    Last Post: 08-20-2008, 04:09 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBulletin®
Copyright © 2014 vBulletin Solutions, Inc. All rights reserved.
Search Engine Friendly URLs by vBSEO
(c) 2006-2012 Hackint0sh.org
All times are GMT +2. The time now is 12:12 AM.
twitter, follow us!