Have a Satellite L300-13S, and have tried everything to install mac OSX. I have tried Iaktos S3, V7, 1.0, patched versions, Kalyway, and anything I can find on TPB. I nearly always get Release_I386 or a blank screen or some sort of error.
I think it has something to do with my AMD cpu, but have no idea. I am now thinking about upgrading my AMD with Intel. I also have installed kalyway and iatkos on my desktop so kind of know what I am doing.
Cheers. COB

Most of the AMD CPU are supported, so that may not be the problem.
You could post your specs, relevant to OSX installation, along with error/failure. It's easier for others to offer some help.

Specs are:
AMD Turion Dual Core Processor RM-70
(1.9GHz, 1600 Mhz, 1MB Cache)
3GB memory
160GB hard drive
ATi Radeon 3100 Graphics card

Archive.zip

I used iatkos 7i this time but that is the code that normally comes up when the process freezes. I press F8, then '-v'. Tried '-x' as well. If I can get this sorted I'll be chuffed.
Cheers COB

You know that AMD can't take vanilla kernel right?
The closest is 9.5, 9.8 Voodoo or Legacy.

Also try this boot options

-x -v cpus=1 (and/or busratio=20)

tried those and keeps coming up with the same RELEASE_I386 error.
With the voodoo thing, I used ideneb v1.3 and iatkos v7 which are meant to work with AMD.

Originally Posted by cobbinma

tried those and keeps coming up with the same RELEASE_I386 error.
With the voodoo thing, I used ideneb v1.3 and iatkos v7 which are meant to work with AMD.

I got iDeneb 1.6 worked with my AMD, iAtkos v7 doesn't work too well.

You could check your BIOS settings. ACPI enable, disable all CPU extra features,
Power/ACPI at S3, HFET 32 bit.

Okay I went into the bios and there are basically no options for acpi or hfet. I turned Dynamic CPU frequency mode from dynamic to always low, but made no difference when using both iatkos v7 and ideneb v1.3. Keep getting this release error.
Pictures of bios:
Bios.zip
Will download ideneb v1.6 over night...
iDeneb v1.6 10.5.8 Lite Edition - Demonoid

Originally Posted by cobbinma

Okay I went into the bios and there are basically no options for acpi or hfet. I turned Dynamic CPU frequency mode from dynamic to always low, but made no difference when using both iatkos v7 and ideneb v1.3. Keep getting this release error.
Pictures of bios:
Bios.zip
Will download ideneb v1.6 over night...
iDeneb v1.6 10.5.8 Lite Edition - Demonoid

I believe you as some of those BIOS got not much option.
Check for iso integrity and burn DVD at slowest speed.
Use those boot options to boot.

I dont think it is the iso integrity as i have tried the exact same disks on a different laptop and they boot fine into the installation.
Is it worth swapping my laptop hard drive and another...

Originally Posted by cobbinma

I dont think it is the iso integrity as i have tried the exact same disks on a different laptop and they boot fine into the installation.
Is it worth swapping my laptop hard drive and another...

I mean checking the one you will be dling.
For other I would not think disc problem since you got several to try already.