Originally Posted by Dj Osiris

Sorry to hear that . You didn't pick anything under Kernel did you? You used the exact settings, nothing more nothing less? About BIOS settings you can try changing them but the AHCI part is the most important. Just to let you know most people are using a modded BIOS to get running with this board! Also you did boot with cpu=1 -f -x -v right?

Goodmorning! No i didnt choose any kernel. i choose only which you had wrote. Only with x86ACPI i change VOODOO PS2 to Apple PS2. I am booting like this -v cpus=1 so nothing else. Friend must i change AHCI to IDE after installation? or it must run on AHCI? why i dont want to check x86ACPI, without it apple logo dont loading! i had try it,Then i had try ather boots to -v, -f, -x, -s, mach_970, busratio=20, cpus=1. And this time all of this dont booting without cpus=1.

Good morning to you too! But here on my side of the world it's night time . Hey try using the same options I told you but instead of adding your x86ACPI
that you say gets you to the apple logo. Add these 3 options:

Remove TyMCE
CardBus driver
USB


If it doesn't work for some reason boot with cpu=1 -x -f -v and take a picture of the text on the screen and upload it for me.


** ALSO if you want to try BIOS setting use these link

Originally Posted by Dj Osiris

Good morning to you too! But here on my side of the world it's night time . Hey try using the same options I told you but instead of adding your x86ACPI
that you say gets you to the apple logo. Add these 3 options:

Remove TyMCE
CardBus driver
USB


If it doesn't work for some reason boot with cpu=1 -x -f -v and take a picture of the text on the screen and upload it for me.


** ALSO if you want to try BIOS setting use these link

Hi. hehehhe. where are you from? i am from Azerbaijan (near Caspian Sea)
ok i ll try. i think my pc system needs x86ACPI, i ll take some pictures for you. Your bios settings link is very helpfull, Thanks you very much!!!

Hi again. I did it how i had said to me. Look must be driver like this?
IAtkos v7 main system
Chameleonv2
Extra directory
DSDT
Apple decrypt
X86ACPI
Disabler
OHR
Remove TyMCE
DVI/DVI
NVEnabler
AHCI
Intel SATA/IDE
CardBus driver
USB
HDA sound driver
Apple PS2
NTFS-3G
Language Russian
is it correct?
i dont add any picture because it was nothing helpfull, Only when system restart after installation it boot and apple logo onthe screen but it wasnt loading there like when it was without x86ACPI.

Hi I'm from the US . Caspian Sea huh? I hear there's some good music and beautiful girls there . About settings no x86ACPI. The CardBus takes the place of this option so it's not needed. However I think you have been somehow installing incorrectly, because if the options don't work. Then on reboot using the flags cpu=1 -x -f -v will give you some kind of read out. After install when it ask you to reboot do you take out the disc? When I was using iATKOS I would leave it in, it would reboot and I wouldn't touch any keys, I would let it freeze at the apple for awhile then pull the disc out reboot, then it would boot fine. If you don't want to have these hassles with installing I can mod your BIOS, you flash it back like you would a regular BIOS update, then no more problems with installing!

Originally Posted by Dj Osiris

Hi I'm from the US . Caspian Sea huh? I hear there's some good music and beautiful girls there . About settings no x86ACPI. The CardBus takes the place of this option so it's not needed. However I think you have been somehow installing incorrectly, because if the options don't work. Then on reboot using the flags cpu=1 -x -f -v will give you some kind of read out. After install when it ask you to reboot do you take out the disc? When I was using iATKOS I would leave it in, it would reboot and I wouldn't touch any keys, I would let it freeze at the apple for awhile then pull the disc out reboot, then it would boot fine. If you don't want to have these hassles with installing I can mod your BIOS, you flash it back like you would a regular BIOS update, then no more problems with installing!

Hi. Very GOOOOOD. Yes there are, very beautifull girls and very old City Baku and best music which calls MUGAM. But USA have beautifull girls too! in which stat of USA are you?
Ok i ll minus x86ACPI and for it +CardBus. Wait wait wait! after installation had you change bios setting to the default setting????? Because i dont know and i am try all ways, first with installation settings, second with default settings! But nothing. And then please write step by step what to do after installations restart. i had try to write cpus=1 -v -f -x but Chameleon starts faster.

look at it-http://j.imagehost.org/view/0238/IMG_0024

YEA!! Finally a screenshot I can use . Good job . Okay according to KP (Kernel Panic) info shown in your screenshot the problem is HPET. We can correct this using DSDT. Do you have a USB flash drive?

Originally Posted by Dj Osiris

YEA!! Finally a screenshot I can use . Good job . Okay according to KP (Kernel Panic) info shown in your screenshot the problem is HPET. We can correct this using DSDT. Do you have a USB flash drive?

Hi. I see it wan usefull . Yes i have Usb flash driver 8GB. and please ask to my gusetion. Must i change Bios setting to defaut after installation or dont?

Now i try like this
IAtkos v7 main system
Chameleonv2
Extra directory
DSDT
Apple decrypt
X86ACPI
Disabler
OHR
DVI/DVI
NViject or Nvdarwin or NVkush
AHCI
Intel SATA/IDE
HDA sound driver
Apple PS2
NTFS-3G
Language Russian

Okay to fix HPET without modding the BIOS we have to use DSDT . I have decompiled your DSDT code from your BIOS and fixed a few compiler issues. I also added some code for HPET and fixed it so Mac will see all your cores eliminating the need to boot with cpu=1. Here is how to place DSDT so Chameleon can use it, instead of your default one.



First download the fixed DSDT for Asus P5QC link.


Copy DSDT.aml to the root of your USB Flash Drive


Pop in your iATKOS disc and go to Utilites > Terminal


In Terminal enter these command hitting enter after each one:

Code:

sudo -s

This command allows you to run as root with admin privilges (often referred to as superuser).

Code:

diskutil list

This command list all disc.


Note down the location of your Flash Drive and your OSX Installation.

Code:

cp -r /Volumes/USB NAME GOES HERE/DSDT.aml /Volumes/YOUR OSX DRIVE GOES HERE/Extra

This command copies DSDT to Chameleon's Extra folder so Chameleon can see and use it.


Let me know if it works, as I may have to adjust some more IRQ's for HPET.
Also about your question about iATKOS yea that's fine and about BIOS you can keep the settings from that guide if you want.

Hope this helps