Snow Leopard on HP G62 105SA, Wondering how to get Mac working on my HP G62 105SA

Hello, this is my first stab at getting Mac working on my HP G62 105SA and I'm running into problems. I have tried to boot up the Snow Leopard by Hazard 10.6.2 but when I see the alien screen it says something about not finding the SMBIOS or something like that, it was too fast for me to see properly. The disc is OK because I booted it up on someone else's Medion computer and it worked fine. iATKOS S3 V2 was also a waste of time. It just quickly flashed the Apple logo and rebooted instantly.
Can anyone help me getting Mac working on my HP G62 105SA? Here are my system specs: http://h10010.www1.hp.com/wwpc/ie/en...9-4099573.html

Thanks in advance,
Crammedshelfish

You could just post your system specs, relevant to OSX installation, so people would not waste much of their time trying to help you.

Here is the output for the lspci command in Linux

Code:

---

00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02)
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02)
00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)
00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05)
00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05)
00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5)
00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05)
00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05)
02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)
ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02)
ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02)
ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02)
ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02)
ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02)
ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02)

---

I hope that helps ;)

Thanks
Crammedshelfish

Sorry, the other link to my specs in my original specs was broken. Here is another link: Hewlett Packard (HP) G62 - 105SA / Core i3 330M 2.13GHz / 3GB / 320GB / DVD-SM / 15.6 inch / Windows 7 Home Premium / Laptop / Notebook (VY364EA) - Computing at Play.com (UK)

Thanks,
Crammedshelfish

Alright, after that much info, still don't know what your chipsets is. Assuming it's in the HM55 family, the regular SL by Hazard would not boot correctly. Your best shot is that iAtkos S3 v2 as it's pre-made with files for i-class CPU. Would also need some boot options to start the installation.

At the moment I have a graphics problem. It doesn't recognize the Intel HD Graphics so the resolution is stuck at 1024x768 when it is actually 1366x768. Also Quartz GL won't turn on.

What version did you install?
As for the issue, you just need to load video kext to enable resolution detection and QE/CI.

I found some drivers for the Intel HD Graphics here: Bragging Rights!: Apple Intel HD Graphic Kexts
I'm not sure how to install them. I tried using Kext Helper b7 to install the kexts only and it just gives me a kernel panic. I didn't install any of the other .bundle and .plugin files. I know I'm doing something wrong.
I'm using iATKOS S3 V2 with the qoopz 10.3 kernel.
I installed the Atheros wireless drivers from the iATKOS disc. Mac recognizes it but it doesn't display any wireless networks when it searches.

I'm kinda short on time now. If I don't get my graphics working by tomorrow I'll have to get rid of Mac so please help me soon!

Hi guys, thanks for creating this forum site, very helpful for people like me : ) I need your help/inputs on how to properly install "Snow Leopard" retail to my HP G62, I have the following hardware specifications:
Motherboard: HP, Model: 1425, 54.26
Chipset: Intel Havendale/Clarkdale Host Bridge Rev. 02
Southbridge: Intel HM55

CPU: Intel Core i3 350M @2.27GHz
Code Name: Arrandale
Package: Socket 1156 LGA

Display: Intel HD Graphics

LAN: Realtek PCIe FE Family Controller
WiFi: Realtek RTL8191SE 802.11b/g/n WiFi Adapter

Sound: Realtek High Definition Audio

I'm not sure if the retail snow leopard disk will work, hope someone already figured out the proper way of installing the drivers. Hope you guys could give instruction on how to create or find the drivers, and how to properly install them, I'm willing spend some $$ for your help, feel free to email me hello.zero@gmail.com. Thanks again.