Kernel Panic

Hello,
I just finished installing Mac OS X 10.6 in my PC's Hard Drive using my iMac to start the .DMG and install the Snow Leopard in my PC's HD. Then, I installed Chameleon 2.0 RC5 and tried to load the HD on my PC, but I got a Kernel Panic in the Apple's logo.
Then, I tried to boot in verbose mode (-v) and got another Kernel Panic, but this time, it was all with texts. The screen I got had a bunch of text, these are the lines that I got:

Quote:

---

The Regents of the University of California. All rights reserved.

MAC Framework successfully initialized
using 16384 buffer headers and 4096 cluster IO buffer headers
IOAPIC: Version 0x20 Vectors 64:87
ACPI: System State [S0 S3 S4 S5] (S3)
RTC: Only single RAM bank (128 bytes)
mbinit: done (64 MB memory set for mbuf pool)
From path: "uuid",
Waiting for boot volume with UUID E7306CB5-1A69-3748-ABD8-9E228A5D64FD
Waiting on <dict ID="0"><key>IOProviderclass</key><string ID="1">IOResources</string><key>IOResourcemath</key><string ID="2">bot-uuid-media</string></dict>
com.apple.AppleFSCompressionTypeZlib load succeeded
AppleIntelPIIXPATA: Secondary PCI IDE channel is disabled
panic(cpu 1 caller 0xffffff80002cbf74): Kernel trap at 0xffffff7f80757ae1, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x0000000000000000, CR3: 0x0000000000100000, CR4: 0x0000000000000660
RAX: 0x0000000000000000, RBX: 0ZFFFFFF800902a800, RCX: 0x00000000f15f0000, RDX: 0xffffff80091f5a08
RSP: 0xffffff804ea9be30, RBP: 0xffffff804ea9be40, RSI: 0x0000000000050006, RDI: 0x0000000000000000
R8: 0xffffff80006d9830, R9: 0x0000000000000000, R10: 0x0000000000000000, R11: 0xffffff7f80757a6e
R12: 0x0000000000000000, R13: 0xffffff800902a800, R14: 0xffffff800913f300, R15: 0x0000000000000000
RFL: 0x0000000000010246, RIP: 0xffffff7f80757ae1, CS: 0x0000000000000008, SS: 0x0000000000000000
Error code: 0x0000000000000000

Debugger called: <panic>
Backtrace (CPU 1), Frame : Return Address
0xffffffff80ea9bad0 : 0xffffff8000204ae6
0xffffffff80ea9bad0 : 0xffffff80002cbf74
0xffffffff80ea9bad0 : 0xffffff80002ddd4a
0xffffffff80ea9bad0 : 0xffffff7f80757ae1
0xffffffff80ea9bad0 : 0xffffff80005235cb
0xffffffff80ea9bad0 : 0xffffff80005238d9
0xffffffff80ea9bad0 : 0xffffff8000523ac4
0xffffffff80ea9bad0 : 0xffffff80002c3eb7
AppleIntelCPUPowerManagementClient : ready
Kernel extensions in backtrace (with dependencies):
com.apple.iokit.IOATAFamily(2.5.0)@0Xffffff7f80753 000->0xffffff7f80761fff

BSD process name correspoding to current thread: kernel_task

Mac OS version:
Not yet set

Kernel version:
Darwin Kernel Version 10.0.0: Fri Ju 31 22:46:25 PDT 2009; root:xnu-1456.1.25~1/RELEASE_X86_64
System model name: iMac8,1 (Mac-F227BEC8)

System uptime in nanoseconds: 1177387504

---

I think that the error comes from the line I bolded:

Quote:

---

AppleIntelPIIXPATA: Secondary PCI IDE channel is disabled

---

I'm not sure what to do, can anyone help me ? I really need this Hackintosh. Thanks.

I will suggest you boot on safe mode -x and if possible post your KP so that ppl that can read KP will assist you to remove possible KP cause

Quote:

---

Originally Posted by jurado

Hello,
I just finished installing Mac OS X 10.6 in my PC's Hard Drive using my iMac to start the .DMG and install the Snow Leopard in my PC's HD. Then, I installed Chameleon 2.0 RC5 and tried to load the HD on my PC, but I got a Kernel Panic in the Apple's logo.
Then, I tried to boot in verbose mode (-v) and got another Kernel Panic, but this time, it was all with texts. The screen I got had a bunch of text, these are the lines that I got:


I think that the error comes from the line I bolded:


I'm not sure what to do, can anyone help me ? I really need this Hackintosh. Thanks.

---

I now advanced this Kernel Panic. And I can get to the Apple logo with the rotating thing underneath it.

But after about 30 seconds, I get this error:

http://www5.picturepush.com/photo/a/...AC-Problem.bmp

What's this ? Is there a fix ?
Thanks

Now I finally got to the Snow Leopard. And I can use it just like a normal Mac.
But there is one problem: I am getting lot's of Kernel Panics. I was trying my internet connection, and I got a kernel panic. Then I rebooted my PC and the internet was fine. Then I was going to try to change my screen resolution, and I got a Kernel Panic.
My internet as I said it's working fine, but my video card isn't. I only have the 1024x768 resolution. How can I fix this ?
Thanks.

It's really amazing that you're asking that many questions through these many posts without even a single clue as what your hardware/specs is, what version of OSX, what support/patches/fixes were installed.

Guessing is sometimes good but not in many problem situations.

Try going into your Bios setting and changing your FastBoot to Thorough.