ASUS Rampage iii EXtreme... System freeze in about every 10 hours.
Sorry for my English is not perfect.(I am Asian.)
This is my Sysytems Componets.(And its Peripherals.)
CPU : I7-980X Extreme
MOBO : Rampage III Extreme
MOBO->Audio Controller : Disabled
MOBO->Ethernet Controller : Gigabit IntelŽ LAN(intel82566MM.kext works)
MOBO->S-ATA Controller1 : ICH10R(Change controller mode to AHCI mode on Bios)
MOBO->S-ATA Controller2 : JMicronŽ JMB363 PATA and SATA controller(Change controller mode to AHCI mode on Bios)
MOBO->S-ATA Controller3 : MarvellŽ 9128 PCIe SATA 6Gb/s controller(Enabled, but Don't Use. Cable Disconnected.)
MOBO->NEC USB3.0 Controller : Enabled(Using LaCieUSB3-OS106 Package)
RAID Controller : HighPoint RocketRAID 2640X4 4ch(Using Official HighPoint RAID Driver Package)
DIMM : 4G Samsung 10600 * 6
VGA : NVIDIA Geforce 470 Reference PCB(Using tonymacx86's Driver)
This is my Bios Settings.
1. Advanced tab -> CPU Configurations
CPU Ratio Setting Auto
C1E Support Enabled
Hardware Prefetcher Enabled
Adjacent Cache Line Prefetch Enabled
MPS and ACPI MADT ordering Modern ordering
Intel(R) Virtualization Tech Enabled
CPU TM Function Enabled
Execute Disabled Bit Enabled
Intel HT Technology Enabled
Active Processor Cores All
A20M Disabled
Intel SpeedStep(TM) Tech Enabled
Intel Turbo Mode Tech Enabled
Performance/Watt select Traditional
Intel C-STATE Tech Disabled
2. Advanced tab -> Onboard Devices Configuration
High Definition Audio Disabled
On board SATA Controller Enabled
GBE Controller Enabled(Without Boot Rom and WOL)
Onboard 1394 Controller Enabled
Onboard SATA6G Controller AHCI MODE
Onboard USB 3.0 Controller Enabled
3. Advanced tab -> USB Configurations
USB Functions Enabled
USB 2.0 Controller Enabled
USB 2.0 Controller Mode HiSpeed
BIOS EHCI Hand-Off Enabled
Legacy USB Support AUTO
4. Advanced tab -> Advanced PCI/PnP Settings
Plug And Play O/S No
5. Main tab -> Storage Configuration
Configure SATA as AHCI
Hard Disk Write Protect : Disabled
IDE Detect Time Out(SEC) 35
6. Power tab
Suspend Mode S3 only
Repost Video on S3 Resume Yes
ACPI 2.0 Support Enabled
ACPI APIC Support Enabled
EuP Ready Disabled
I attached SMBIOS File , DSDT.aml File, and kextstat result file and list of EE and SLE.
http://pds21.egloos.com/pds/201101/12/86/files.zip
This is work sequence.
1. Install retail OSX using IBoot Disk.
2. Update and install bootloader(Using IBoot Disk).
3. Boot by bootloader and install Driver Files(USB3.0, Highpoint Driver, Intel Ethernet Driver and NVIDIA 470 Driver).
4. Delete AppleTyMCEDriver.kext. I Don't Know Why.(http://www.hackint0sh.org/f213/154628.htm)
5. Patch DSDT.AML(Slow SATA FIX)
6. Shut Down.
7. Connect Data storage Disk in ICH10R(I use SSD Raid-0 for boot Device)
8. Format Data store disk to exFAT FS.(I Want to use this between OSX and Windows7)
9. setup Vmware Fusion and install Windows.(Because I Have to Use ActiveX for my Work)
10. VM Image File is stored in DATA disk(ICH10R)
11. Use System for about 9~10 hours.
12. System Freeze.
13. Reset System. System works normally.
14. Turn on VM.
15. 11~14 repeated.
I want to know why this problem happens.
Please Help me how to solve this trouble.
