Hi there, I'm running iAtkos i5 now on this laptop, but it has no sound and the graphic card wasn't recognised.
Now I want to install 10.6.X(Don't care which subversion)

But which one will work the best?
I have:
Processor: Intel® Core(TM)2 Duo CPU P7350 @
Video: ATi Radeon X3400(I think...Mac can't seem to notice him, so I'm not sure anymore)
Sound: I don't know, Mac can't see which one it is...
It's a laptop from Packard Bell, and I saw some things like Easynote
The Packard Bell model name is Vesuvio GM.

And some other model name is KMG00(This name is at the same label as the serial number and product number?)

I hope someone can help me :-)

EDIT:
I forgot, I tried iAtkos S3 V2 but then I get some "system uptime in nanoseconds error"
And before that I got the Chameleon error saying something with EFI strings?
It was on the disc boot, and I tried a different download, and got the same error.

Put it in the edit!

@ Rappybas

Im stuck same situation
System model name: macbookpro4,1

System uptime in nanoseconds

i have

intel core 2 duo t7250 @2.00ghz

2.00gb of RAM

broadcom netxtreme 57xx gigabit comtroller

intell wireless wifi link4965agn

Nvidia quatro nvs 135m

use iatkos s3 v2

Originally Posted by langaro

System uptime in nanoseconds

Your guys should include more info.
System uptime is about the last line of a KP, and wouldn't provide much clue as what happened other than kernel crash/panic.
Your chipsets info, BIOS setup, boot options used, whether it's booting to installation or at first reboot afterward and other lines related to what involved with the KP as there are hundred of them and you guys don't want people doing some guessing really.

@ ratvn

Im a newbie and dont really know how to copy all of the KP, can you help me how to do that..i dont really want to copy word for word every single line..

also when i install the iatkos...the only setting on bios i changed was the ata to ahchi

i would rather you help me how to start over...>

here are my specs

Motherboard
CPU Type Mobile DualCore Intel Core 2 Duo T7250, 2000 MHz (10 x 200)
Motherboard Name Dell Latitude D830
Motherboard Chipset Intel Crestline-PM PM965
System Memory 2048 MB (DDR2-667 DDR2 SDRAM)
BIOS Type Phoenix (01/04/10)
Communication Port Communications Port (COM1)

Display
Video Adapter NVIDIA Quadro NVS 135M (128 MB)

Multimedia
Audio Adapter SigmaTel STAC9205X @ Intel 82801HBM ICH8M - High Definition Audio Controller [B-0]

Storage
IDE Controller Intel(R) ICH8M 3 port Serial ATA Storage Controller - 2828
IDE Controller Intel(R) ICH8M Ultra ATA Storage Controllers - 2850
Disk Drive WDC WD800BEVT-75ZCT1 ATA Device (74 GB, IDE)
SMART Hard Disks Status OK

Network
Network Adapter Broadcom NetXtreme 57xx Gigabit Controller
Network Adapter Intel(R) Wireless WiFi Link 4965AGN (192.168.1.102)


can you help me choose my my custom drivers
i have iatkos s3 v2

1. Clear the partition for a clean install every time.
2. Use minimal install to minimize chance of KP's. No video, audio, network etc.
3. Select only the essentials, kernel vanilla or qoopz/anavirth, chameleon RC4, chipsets ICHx and some other fixes if needed.
You can always go back and add more to it once getting into OSX desktop.
4. Use some boot option -x -v cpus=1 (and busratio=20 if needed).

im able to boot to OS now. now how can i install my drivers..for

Video Adapter NVIDIA Quadro NVS 135M

Audio Adapter SigmaTel STAC9205X @ Intel 82801HBM ICH8M - High Definition Audio Controller [B-0]

Network Adapter Broadcom NetXtreme 57xx Gigabit Controller
Network Adapter Intel(R) Wireless WiFi Link 4965AGN (192.168.1.102)

im only able too boof with EmpireEFI boot cd and boot with -v -x

I'd actually like to know how to install the drivers after a successful minimal install as well.
I get it up and running on my gateway laptop T6345u but sometimes the audio doesn't work, and the graphics stay in shitty 1024x768 mode. also wireless doesn't work.

I am using iAtkos S3 V2 but am going to try Hazzards today on my Shuttle SG33G5, which won't even recognize the iAtkos disc.

Intel P4 Dual Core 2.56
2gb DDR2
240GB Seagate SATA
Intel: Mobile PM965/GM965/GL960
Mobile GM965/GL960 Integrated Graphics Controller
8201 H HD Audio
8201 H PCIe controller
Pro Wireless 3945ABG Network Connection
82801 USB, PCI bridge, HEM LPC Interface, IDE Controller, SATA, SMBUS
Realtek RTL8101E/RTL8102E PCIe Fast Ethernet

Your bare install is actually not minimal after all, as you're only missing several device kexts/drivers. Consider that there are many "full" installation being left without full audio, video, network etc. functionalities due to kext/driver unavailabilities.
As for those devices, you would need to know model number/ID to look for correct/working kexts. Kext installers would be needed for proper installation.