Originally Posted by pizzajoe

Forget about where to download..

But under installation should I then try installing with or without all the "kexts" in the start.. or just the video as you told me?

Select your essential drivers and fixed. ICHx for south chipsets controller. For video ATI ATY_init. Just try with various options but keep it at minimal so you can be in OSX first.

Hey PizzaJoe you didn't mention your lappie model, but you can try these settings in iDeneb


iDeneb Essential System
iDeneb Patches
Chameleon v2
Kernel - 9.5.0 Vanilla
Chipset - ICHx Fixed
Network - ? (you only mentioned Realtek)
Graphics - NVinject 512



Hope this helps.

I can't get it to work.. When I try installing with the settings mentioned, then after reboot it keep blackscreen and the white underscore just keep blinking.

But When downloaded v1.6 there are 6 parts only in part one there is a ISO file that ive burned to a DVD+RW disk what is all the other parts for ?

Originally Posted by pizzajoe

I can't get it to work.. When I try installing with the settings mentioned, then after reboot it keep blackscreen and the white underscore just keep blinking.

But When downloaded v1.6 there are 6 parts only in part one there is a ISO file that ive burned to a DVD+RW disk what is all the other parts for ?

Hi,
What is the capacity of that DVD, of each part, and their file format.
Do you have windows running on your computer?

With your system specs you should be able to use Vanilla, however Hackint0sh's don't always work as expected, but there in lies the fun.
You did remember to boot with the cpu=1 switch correct? Next time you try installing and something doesn't work try booting Verbose, to see if any useful data can be gained. About those 6 parts, they are supposed to = the ISO when extracted, give or take a few due to compression. Often times large files are split like that to make it easier to upload and also because many file host enforce size limits.

Now i'm into Mac Os X !! great news ..

I installed with Vanilla Kernel PS/2 driver cpus=1fix and chipset ICHx nothing else . btw I used bootloader 1.2 instead of v2

BUt now my wireless dosn't work and graphic either .. Where and how can I install kext/drivers for them now ??

Good to hear . Trying using NVenabler for your graphics card you can use a utility like kext helper to help you. For wireless can't say I don't know your card. Regards

Originally Posted by Dj Osiris

Good to hear . Trying using NVenabler for your graphics card you can use a utility like kext helper to help you. For wireless can't say I don't know your card. Regards

Aarg ! can't get it to work

I've tried to mkae a complete reinstall of iDeneb with all the different NVidia drivers ofc only one at a time .. and also the ATI driver but when loading iDeneb my screen just get black.. the best driver was the NVdarwim i think there the screen became lightblue after the black screen but then i'm just stuck there..

Is my graphic-card not supported ?

Originally Posted by pizzajoe

Aarg ! can't get it to work

I've tried to mkae a complete reinstall of iDeneb with all the different NVidia drivers ofc only one at a time .. and also the ATI driver but when loading iDeneb my screen just get black.. the best driver was the NVdarwim i think there the screen became lightblue after the black screen but then i'm just stuck there..

Is my graphic-card not supported ?

I think your card is supported, but may not be in the DVD. 9400 and 9500 ATY-init should work, but yours is 9600.
So don't SELECT any video driver during installation.

You're doing well. Keep going my friend. Sometimes it's hard. It took me 3 week to get my first OSX.

So maybe try installing again with NO VIDEO driver.
Keep me posted.

What ratvn said sounds good . You can also boot with -S and try NVEnabler like I mentioned above. If you have and it didn't work try using a EFI string.