Guys is it possible that i can install snow leopard by hazard on my Gateway UC7313i?

Here is my specs:
Processors Information
Processor 1 ID = 0
Number of cores 2 (max 2)
Number of threads 2 (max 2)
Name Intel Pentium T4200
Codename Penryn
Specification Pentium(R) Dual-Core CPU T4200 @ 2.00GHz
Package (platform ID) Socket P (478) (0x7)
Extended CPUID 6.17
Core Stepping R0
Technology 45 nm
Core Speed 1995.1 MHz
Multiplier x FSB 10.0 x 199.5 MHz
Rated Bus speed 798.0 MHz
Stock frequency 2000 MHz
Instructions sets MMX, SSE, SSE2, SSE3, SSSE3, EM64T
L1 Data cache 2 x 32 KBytes, 8-way set associative, 64-byte line size
L1 Instruction cache 2 x 32 KBytes, 8-way set associative, 64-byte line size
L2 cache 1024 KBytes, 4-way set associative, 64-byte line size
FID/VID Control yes
FID range 6.0x - 10.0x
Max VID 1.150 V
Northbridge Intel GM45/GM47 rev. 07
Southbridge Intel 82801IM (ICH9-M) rev. 03
Memory Type DDR2
Memory Size 2048 MBytes
Channels Single
Memory Frequency 332.5 MHz (3:5)
CAS# latency (CL) 5.0
RAS# to CAS# delay (tRCD) 5
RAS# Precharge (tRP) 5
Cycle Time (tRAS) 15
MCHBAR I/O Base address 0x0FED14000
MCHBAR I/O Size 4096

Display Adapters
Display adapter 0
Display name \\.\DISPLAY1
Name Mobile Intel(R) 4 Series Express Chipset Family
Memory size 782 MB
PCI device bus 0 (0x0), device 2 (0x2), function 0 (0x0)
Vendor ID 0x8086 (0x1025)
Model ID 0x2A42 (0x0199)
Network: WLAN: Atheros AR928X Wireless Network Adapter
LAN: Realtek RTL8101E Family PCI-E Fast Ethernet NIC (NDIS 6.20)

Audio:Realtek High Definition Audio

What drivers will i choose in SNow leopard by hazard?

Thank you to all