Ok well first off hello everyone I am new here but with a problem
I wish to install a copy of mac snow leopard, now im 100% new to this
so far i downloaded i
PC osx86 10.5.6 universal PPPF5 final - got kernel error
and
i Deneb 1.4 osx86 - still waiting on root device
currently i still need some dvds to try iATKOS v7 and kalyway 10.5.2
now I dont mind if the OS is a little out dated I just want to learn about mac so i want a mac os on my pc
here are my specs

Code:

System information report, generated by Sysinfo: 4/14/2010 9:25:14 PM
Sysinfo | Get Sysinfo at SourceForge.net

SYSTEM INFORMATION
	Running Ubuntu Linux, the Ubuntu 9.10 (karmic) release.
	GNOME: 2.28.1 (Ubuntu 2009-11-03)
	Kernel version: 2.6.31-20-generic (#58-Ubuntu SMP Fri Mar 12 04:38:19 UTC 2010)
	GCC: 4.4.1 (x86_64-linux-gnu)
	Xorg: unknown (04 March 2010  09:57:23AM) (04 March 2010  09:57:23AM)
	Hostname: tannersummers-desktop
	Uptime: 0 days 0 h 7 min

CPU INFORMATION
	AuthenticAMD, AMD Athlon(tm) 64 X2 Dual Core Processor 3800+
	Number of CPUs: 2
	CPU clock currently at 1000.000 MHz with 512 KB cache
	Numbering: family(15) model(75) stepping(2)
	Bogomips: 2008.81
	Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt rdtscp lm 3dnowext 3dnow rep_good pni cx16 lahf_lm cmp_legacy svm extapic cr8_legacy

MEMORY INFORMATION
	Total memory: 3962 MB
	Total swap: 8754 MB

STORAGE INFORMATION
	SCSI device -  scsi0
		Vendor:  ATA      
		Model:  Hitachi HDT72502 
	SCSI device -  scsi1
		Vendor:  ATAPI    
		Model:  DVD A  DH16A1L   

HARDWARE INFORMATION
MOTHERBOARD
	Host bridge
		Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
	PCI bridge(s)
		nVidia Corporation MCP61 PCI bridge (rev a1) (prog-if 01)
		nVidia Corporation MCP61 PCI Express bridge (rev a2)
		nVidia Corporation MCP61 PCI Express bridge (rev a2)
		nVidia Corporation MCP61 PCI bridge (rev a1) (prog-if 01)
		nVidia Corporation MCP61 PCI Express bridge (rev a2)
		nVidia Corporation MCP61 PCI Express bridge (rev a2)
	USB controller(s)
		nVidia Corporation MCP61 USB Controller (rev a3) (prog-if 10)
		nVidia Corporation MCP61 USB Controller (rev a3) (prog-if 20)
		nVidia Corporation MCP61 USB Controller (rev a3) (prog-if 10)
		nVidia Corporation MCP61 USB Controller (rev a3) (prog-if 20)
	ISA bridge
		nVidia Corporation MCP61 LPC Bridge (rev a2)
		Subsystem: Hewlett-Packard Company Device 2a5b
	IDE interface
		nVidia Corporation MCP61 SATA Controller (rev a2) (prog-if 85 [Master SecO PriO])
		Subsystem: Hewlett-Packard Company Device 2a5b

GRAPHIC CARD
	VGA controller
		nVidia Corporation G94 [GeForce 9600 GT] (rev a1)
		Subsystem: Device 19f1:0765

SOUND CARD
	Multimedia controller
		nVidia Corporation MCP61 High Definition Audio (rev a2)
		Subsystem: Hewlett-Packard Company Device 2a5b

NETWORK

NVIDIA GRAPHIC CARD INFORMATION
	Model name: GeForce 9600 GT
	Card Type: PCI-E 16x
	Video RAM: 512 MB
	GPU Frequency: 675 MHz
	Driver version: NVIDIA UNIX x86_64 Kernel Module  185.18.36  Fri Aug 14 17:35:21 PDT 2009

So everyone please i am begging you for help iv done a week of research and I am so confused I really want this so please help me and bear with me
in advance please and thank you

I think every distro will give you error at first, but you have to fix it.
Search this forum for the error and the fix.
If you can't find it, post the screen shot here, may be someone will help.
But for trial, ideneb is just as good.
Customize it..

Hi there,
I have the same AMD CPU, x2 3800+ 2.5Ghz, OCed to 3.25Ghz, running 10.6.2 and 10.5.8 beautifully. However, my supporting chipsets are ATI SB600 and your NV is a bit more picky.
Thanks to Swordsman who pointed out, Ideneb 1.6 Lite 10.5.8 is much better as I've tried many of them to no avail. Iatkos v7 can be installed but it took way too long. Hope this assist you in some ways.
Regards,

Originally Posted by ratvn

Hi there,
I have the same AMD CPU, x2 3800+ 2.5Ghz, OCed to 3.25Ghz, running 10.6.2 and 10.5.8 beautifully. However, my supporting chipsets are ATI SB600 and your NV is a bit more picky.
Thanks to Swordsman who pointed out, Ideneb 1.6 Lite 10.5.8 is much better as I've tried many of them to no avail. Iatkos v7 can be installed but it took way too long. Hope this assist you in some ways.
Regards,

So you think I should Ideneb 1.6 Lite 10.5.8 or Iatkos v7?
you think it would work on my pc?

Originally Posted by swordsman

I think every distro will give you error at first, but you have to fix it.
Search this forum for the error and the fix.
If you can't find it, post the screen shot here, may be someone will help.
But for trial, ideneb is just as good.
Customize it..

Ya but I see i am not sure how to fix it people say download these files I think off one site and had no clue what to do with it

so do you guys know if iPC or iDeben are able to work on my hardware first?
iPC gave me
Darwin Kernel Version 9.5.0: Sat Dec 6 19:39:54 IST 2008; Voodoo; Release 1.0 :xnu-1228.7.58/BUILD/obj/RELEASE_I386

Ok update i tried iPC, Ideneb 1.6 Lite 10.5.8, and Iatkos v7, ideben 1.3 10.5.6

but yet no luck i googled and searched on these forums both errors and with no success

so what now?

check if your SATA can be set to AHCI instead of IDE..

Originally Posted by TannerS

Ok update i tried iPC, Ideneb 1.6 Lite 10.5.8, and Iatkos v7, ideben 1.3 10.5.6

but yet no luck i googled and searched on these forums both errors and with no success

so what now?

Hi,
I am sorry but I don't quite understand your question at all.

Originally Posted by swordsman

check if your SATA can be set to AHCI instead of IDE..

Nope not that I could find...

Originally Posted by ratvn

Hi,
I am sorry but I don't quite understand your question at all.

I downloaded and tried
iPC
Ideneb 1.6 Lite 10.5.
Iatkos v7
ideben 1.3 10.5.6

and besides iPC i got "still waiting for root device"

and I searched up my errors (both of them) on google and these forums, and came up dry

Hi there,
I got it now and sorry that you are running into so much trouble. I googled your hard drive and it looks like a SATA, so that part is good to go. In your BIOS there should be an option to set sata controller to AHCI. Try to find that and give me your motherboard make and model so I will try to look it up as well if you can not find it ( if that option is not feasible then there is more work needed to be done).
Let try it with Ideneb 1.6 Lite, 10.5.8, and don't select any NV driver but choose ATI ATY_init for your graphic injection. Boot with options: -x -v busratio=20 cpus=1.
Good luck,
Regards,

Originally Posted by ratvn

Hi there,
I got it now and sorry that you are running into so much trouble. I googled your hard drive and it looks like a SATA, so that part is good to go. In your BIOS there should be an option to set sata controller to AHCI. Try to find that and give me your motherboard make and model so I will try to look it up as well if you can not find it ( if that option is not feasible then there is more work needed to be done).
Let try it with Ideneb 1.6 Lite, 10.5.8, and don't select any NV driver but choose ATI ATY_init for your graphic injection. Boot with options: -x -v busratio=20 cpus=1.
Good luck,
Regards,

1) nope no where I checked everywhere it is very limited
2)i have Ideneb 1.6 Lite, 10.5.8,
but has same error as normal deneb

i tried the boot prompt:
-x -v busratio=20 cpus=1.

but nothing "still waiting for root device"



anyway iv been reading when people say load with this and that driver, like how you said dont select that driver, i have no clue how..i run it i get errors and if i type in -v to see everything i dont select anything i cant do anything just watch all the stuff go across my screen untill i run into the error agian