First this will be my first try on installing osx86.

Ok Specifications are:
General
Built-in Devices Wireless LAN antenna , Stereo speakers
Width 14.2 in
Depth 10.5 in
Height 1.5 in
Weight 6.0 lbs
Localization United States
Notebook type Thin-and-light (4-6 lbs.)
Screen type Widescreen
Wireless capabilities IEEE 802.11b , IEEE 802.11g
Processor
Processor Intel Celeron M 380 / 1.6 GHz
Data bus speed 400.0 MHz
Processor features Execute Disable Bit capability
Chipset type ATI Radeon Xpress 200M
Cache Memory
Type L2 cache
Cache size 1.0 MB
RAM
Installed Size 512.0 MB / 2.0 GB (max)
Technology DDR2 SDRAM - 533.0 MHz
Memory specification compliance PC2-4200
Environmental Parameters
Min Operating Temperature 41.0 °F
Max Operating Temperature 95.0 °F
Humidity Range Operating 20 - 80%
Storage Controller
Storage controller type Serial ATA/IDE
Storage Controller / Serial ATA Interface Serial ATA-150
Storage
Floppy Drive None
Hard Drive 80.0 GB - Serial ATA-150 - 5400.0 rpm
Storage Removable None
Hard drive type Portable
Optical Storage
Type DVD±RW (±R DL) / DVD-RAM - Integrated
CD / DVD read speed 24x (CD) / 8x (DVD)
CD / DVD write speed 24x (CD) / 8x (DVD±R) / 4x (DVD±R DL)
CD / DVD rewrite speed 16x (CD) / 6x (DVD-RW) / 8x (DVD+RW) / 5x (DVD-RAM)
Optical Storage (2nd)
2nd optical storage type None
Display
Display Type 15.4 in TFT active matrix
Max Resolution 1280 x 800 ( WXGA )
Widescreen Display Yes
Features TruBrite
Video
Graphics Processor / Vendor ATI Radeon Xpress 200M
Video Memory Shared video memory (UMA)
Max Allocated RAM Size 128.0 MB
Audio
Audio output type Sound card
Audio codec Realtek ALC861
Audio output compliant standards DirectSound3D , DirectSound , DirectMusic
Audio Output Features High Definition Audio , SRS TruSurround XT , SRS WOW
Audio Input None
Input Device(s)
Input device type Touchpad , Keyboard
Telecom
Modem Fax / modem
Max transfer rate 56.0 Kbps
Protocols & Specifications ITU V.90
Networking
Networking Network adapter
Networking / Wireless LAN Supported Yes
Data link protocol IEEE 802.11g , Ethernet , IEEE 802.11b , Fast Ethernet
Networking standards IEEE 802.11b , IEEE 802.11g
Expansion / Connectivity
Expansion Bays None
Expansion Slots Total (Free) 2.0 ( 1.0 ) x PC Card - Type II , 1.0 ( 1.0 ) x Memory
Interfaces 1.0 x Hi-Speed USB - VGA - 4 pin USB Type A , 1.0 x Microphone - S-video output - 15 pin HD D-Sub (HD-15) , 1.0 x Modem - Input - Mini-phone stereo 3.5 mm , 1.0 x Headphones - Phone line - RJ-11 , 4.0 x Display / video - Output - RJ-45 , 1.0 x Display / video - Ethernet 10Base-T/100Base-TX - Mini-phone 3.5 mm , 1.0 x Network
Miscellaneous
Features Administrator password , Security lock slot (cable lock sold separately) , Power-on password
Compliant Standards VESA DPMS , APM 1.2 , Plug and Play , ACPI 1.0b
Pricing Type Refurbished
Power
Power device form factor External
Voltage Required AC 120/230 V
Battery
Technology 4-cell Lithium ion
Installed Qty 1.0 / 1.0 (max)
Battery capacity 2000.0 mAh
Mfr estimated battery life 1.5 hour(s)
Operating System / Software
OS Provided Microsoft Windows XP Home Edition

So I hope some expert out there could direct me into the right path thanks! Also I already have iAtkos 10.5.6 i believe so if that one would work please tell me thanks!

well i successfully did it on my toshiba satellite a135-s4527
i just followed a quick installation instructions i used iDeneb you might wanna give that a try very simple
only problem is you might be missing your build in wifi
http://tgrounds.blogspot.com/2008/10...055-on-pc.htmlheres the tut for iDeneb that i used dont have it for iAtkos tho