[Hackint0sh 10.5.x Compatibility Database Template]

OSX Version: (10.5.2) + (10.5.3 Update) + Apple Software Update to 10.5.4

Builder: ( Kalyway )


Desktop/Laptop: Desktop

Prebuilt: (Yes)

If prebuilt add the infos, otherwise fill Mainboard area)
Manufacturer: (Gateway)
Model: (DX440X)

Installation Methods: (Gparted Created two blank partitions. Installed Vista first, Installed OsX86 second, Repaired Vista afterwards : Must boot from USB DVD otherwise "waiting for root" message)

(In this section, which you do not know how to write "unknown")
Mainboard Area
Manufacturer: G33 Schrodertown based Motherboard
Model: G33
Chipset: ICH9
BIOS version:
Revision:
BIOS options: (Non Raid SATA)
Onboard Audio Chipset: Sigmatel 9200 - STAC92XX
Onboard Audio Patches: (What patches used) Apple HDA Patcher v1.20
Work Line In, Line Out, Mic: Doesnot work
Onboard Network Card/Chipset: (Intel 82562V) Works without patches? (no, if yes list patches used in next field)
Onboard Network Patches: viarhine.kext
Onboard Network Works: (no)
SATA Devices: (All SATA works)
IDE Devices: ( DVD Device Works)

Processor Area
Manufacturer / Processor Model: Q6600
Velocity: 2.4 g
Recognized in System Profiler as: Unknown
Need Patched AppleSMBIOS.kext: (no)

Video Card Area
Device connection: (PCI Express)
NVIDIA/ATI/Intel/Other? NVidia
Model (chipset): 8500GT
RAM Memory: 2GIG
Manufacturer / ID:
Patches: NVIDIA PATCH
QE/CI (Quartz Express/Core Image):
QLG (Quartz GL):
Mirror:
Dual Screen: YES
All resolution avaiable: UP TO 1920 X 1200

Audio Card Area (it's only for PCI/PCI-e/USB/Firewire/Other cards - on-board audio cards then described in the session on motherboard)
Interface: PCI/PCI-e/USB/Firewire/Other? USB
Manufacturer: Lexicon
Model: Lambda
Audio Chipset:
Audio Patches: (What patches used) NONE
Work Line In, Line Out, Mic: EVERYTHING WORKS

Network Card Area (it's only for Wired/Wireless miniPCI/PCI/PCI-e - on-board network cards then described in the session on motherboard)
Interface: USB
Standard (Wireless): (802.11G)
Manufacturer: Trendnet
Model/chipset: ZYDAS1211
Works without patches: (NO)
Network Patches:INSTALL SOFTWARE FOR ZYDAS1211 + Vendor ID edit

Other Devices (PCI-E)
Type: (Avermedia M791 TV Card)
Name:
Manufacturer: Avermedia
Product ID:
Vendor ID:
Works: (Yes/No) NO
Patches:

OSX Version:
10.5.2 updated with Kalyway Combo Update to 10.5.3, and with Apple Update to 10.5.4.

Builder:
Kalyway

Desktop/Laptop:
Desktop

Prebuilt:
I built this baby myself.

Installation Methods:
Installed from unmodified Kalyway 10.5.2 DVD on GUID/MBR hybrid partition created with Disk Utility. I'm using hybrid because I want to keep an NTFS storage partition on the drive and this is the only way Windows XP will be able to access it.
Windows is installed on a separate drive altogether.

Installed with Darwin/PC-EFI, modbin SSE3 kernel, no video injector, no AGPGart, no network driver, and none of the fancy things that you can install later anyway if you need them.

Sorry, I don't remember what else I picked, or didn't pick. Just don't pick anything that looks like it won't work!

I'm using the StageXNU 9.4.0 kernel and the Chameleon bootloader now.
64-bit compatibility is better for me on this kernel.
For example Chess crashes with Modbin Kernel in 64-bit mode and works with StageXNU.

Also Leopard Cache Cleaner used to tell me that 'rebooting will improve system performance' after some time on all kernels I've used previously. I've never seen this message when using the StageXNU kernel, even after leaving the system running all night.

Mainboard Area

Manufacturer:
ASUS

Model:
P5P800-SE

Chipset:
Intel 865PE, ICH5

BIOS version:
805 beta

BIOS options:
SATA set to AHCI/Native, ACPI mode to Auto, All CPU features enabled.
Automatic fan speed regulation is disabled, my fan has a manual control. I don't know if this matters though.

Onboard Audio Chipset:
Soundmax AC97 ADI 1888 device ID 0x24d5

Onboard Audio Patches:
None needed

Work Line In, Line Out, Mic:
Front mic+headphone works, rear mic input is Line Out. Other I/O not tested.

Onboard Network Card/Chipset:
Intel Pro1000/MT - device ID 0x100e - 82540EM - needs other kext

Onboard Network Patches:
IONetworkingFamily.kext from JAS 10.4.8 DVD

Onboard Network Works:
Yes, with the above kext.
With Leo kext the system freezes when there's any network traffic.

SATA Devices:
Both channels work, ICH5 seems to be very well supported.

IDE Devices:
Both channels work (slave channels untested)

Processor Area

Manufacturer / Processor Model:
Intel Pentium 4 model 651 (SSE3, EIST, EMT64, HT)

Velocity:
3.40GHz

Recognized in About This Mac as:
Unknown. I added the CPU info there myself using OSX86Tools.
800MHz bus speed and memory type is set by mac.nub AppleSMBIOS.kext.

Need Patched AppleSMBIOS.kext:
I guess. Using the latest from mac.nub with these kernel flags in boot.plist:
MemSpeed=800 MemType=DDR (plus a homegrown serial number)

I've got SpeedStepping fully working with all available p-states detected using XNU-Speedstep along with tux' beta speedstep.app set to run at login:
http://code.google.com/p/xnu-speedstep/

Reboot/Sleep/Shutdown all working.

Video Card Area

Device connection:
AGPx8 (recognized as PCI)

NVIDIA/ATI/Intel/Other?
Nvidia

Model (chipset):
7600GT

RAM Memory:
256

Manufacturer / ID:
Leadtek A7600 GT TDH - 10de02e0

Patches:
NvInject, NVKUsh or EFI string, but for some reason it will only work with Natit post 10.5.3.

Must insert device ID manually.

Here's my NVCAP which allows me to boot without unplugging TV-Out first (it disables it):
04 00 00 00 00 00 01 00 06 00 00 00 00 00 00 07 00 00 00 00

QE/CI (Quartz Express/Core Image):
Yes

QLG (Quartz GL):
Yes

Mirror:
Off (untested)

Dual Screen:
Haven't tried

All resolution available:
Yes.
When using DVI I get screen corruption when switching resolutions and have to reboot to restore normal display. Does not happen with VGA.
Discussed here: http://forum.insanelymac.com/index.php?showtopic=70007

misc hardware:

Logitech cordless USB mouse/keyboard, fully supported using Logitechs own drivers

Logitech USB Quickcam Pro 9000 - support built-in

Canon Digital Ixus V2 camera via USB - working flawlessly.

USB HID PlayStation Controller adapter with two controller ports from Play.com - support built-in

E-MU XMIDI 1x1 USB MIDI interface - support built-in

SoundBlaster X-Fi XtremeMusic PCI card - not supported.

Thoughts
I'm pretty happy with this system, the P5P800-SE seems to be a very good, stable and well supported board for running OSX on an SSE3 capable Pentium 4. With the Pentium D 960 (SL9K7) and some more RAM it would really fly (not that it doesn't already).

The only downside I can think of is the AGP port being recognized as PCI which means that if you want good framerate in games you have to play at 640x480. Otherwise graphics performance in daily use is great.

I hope someone finds this information useful.

Quote:

---

Originally Posted by f41qu3

[Mine configs, all can use it as template for help-out]

---

Hello.

Please ... I've have the exact config as you. But can't install leo, kalyway, iatkos, uphuck, jas.
Canyou guide me? Or direct me to some post to do SnowLeopard, partitioned on GUID scheme, run with Chameleon and ToH modified bootloader?

Please .. .please ... :)

This place ( http://www.hackint0sh.org/forum/showthread.php?t=37447 ) is only for database, not for help.

SnowLeopard is for only ADC Apple Developers and ToH Staff Development.

You need a special bootloader. Only ToH Staff has it. And for now, we don't share it.

Thanx to understand. Don't beg, plzkthx.

The template ought to denote whether or not sleep works and how to get it to work.